Tribological assessment of a flexible carbon-fibre-reinforced poly(ether-ether-ketone) acetabular cup articulating against an alumina femoral head

New material combinations have been introduced as the bearing surfaces of hip prostheses in an attempt to prolong their life by overcoming the problems of failure due to wear-particle-induced osteolysis. This will hopefully reduce the need for revision surgery. The study detailed here used a hip simulator to assess the volumetric wear rates of large-diameter carbon-fibre-reinforced pitch-based poly(ether-ether-ketone) (CFR-PEEK) acetabular cups articulating against alumina femoral heads. The joints were tested for 25 x 10(6) cycles. Friction tests were also performed on these joints to determine the lubrication regime under which they operate. The average volumetric wear rate of the CFR-PEEK acetabular component of 54 mm diameter was 1.16 mm(3)/10(6) cycles, compared with 38.6 mm(3)/10(6) cycles for an ultra-high-molecular-weight polyethylene acetabular component of 28 mm diameter worn against a ceramic head. This extremely low wear rate was sustained over 25 x 10(6) cycles (the equivalent of up to approximately 25 years in vivo). The frictional studies showed that the joints worked under the mixed-boundary lubrication regime. The low wear produced by these joints showed that this novel joint couple offers low wear rates and therefore may be an alternative material choice for the reduction of osteolysis.     

Effectiveness of participatory ergonomic interventions on health outcomes: a systematic review

The objective of this study was to conduct a systematic review of the literature on the effectiveness of participatory ergonomic (PE) interventions for improving workers' health. The search strategy targeted six electronic databases and identified 442 potential articles. Each article was examined by pairs of reviewers for relevance (assessed a participative ergonomic workplace intervention, with at least one health outcome, published in English in peer reviewed literature). Twenty-three articles met relevance criteria and were then appraised for methodological strength. Using a best evidence synthesis approach, 12 studies that were rated as 'medium' or higher provided partial to moderate evidence that PE interventions have a positive impact on: musculoskeletal symptoms, reducing injuries and workers' compensation claims, and a reduction in lost days from work or sickness absence. However, the magnitude of the effect requires more precise definition.     

Echelles: scalar, electromagnetic, and real-groove properties

For lack of alternatives, echelle-grating diffraction behavior has in the past been modeled on scalar theory, despite observations that indicate significant deviations. To resolve this difficulty a detailed experimental, theoretical, and numerical study is performed for several echelles that work at low (18-13), medium (35-55), high (84-140), and very-high (to 660) diffraction orders. Noticeable deviations from the scalar model were detected both experimentally and numerically, on the basis of electromagnetic theory: (1) the shift of the observed blaze position was shown to decrease with the wavelength-to-period ratio, and it tends to zero more rapidly than the decrease of the maximum width, so that the TE- and TM-plane responses tend to merge into each other; (2) cut-off effects (Rayleigh anomalies) were found to play a significant role for high groove angles, where passing-off orders are close to the blaze order. A possibility for evaluation of the blaze angle from angular, rather than from spectral, measure nts is discussed.Several reasons for the differences between real and ideal echelles (material-index deviations, profile deformations, and groove-angle errors) are analyzed, and their effects on the performance of echelles is studied.     

Synthetic circular-harmonic phase-only filter for shift, rotation, and scaling-invariant correlation

A synthetic circular-harmonic phase-only filter is described. With this filter and a Fourier-transform correlator it is possible to obtain shift, rotation, and scaling-invariant correlations.     

Photothermal measurements on optical thin films

An overview of the application of the photothermal technique for optical as well as thermophysical characterizations of thin films is given. The peculiarities of this technique are discussed in some detail, and selected important results are pointed out. Emphasis is placed on the influence of both residual absorption and randomly distributed inhomogeneities in thin films on their laser-damage resistance.     

Color ellipsoscope for real-time imaging of nanometer-scale surface phenomena

An imaging method was developed based on null ellipsometry with a white-light source. It is useful for visualizing the kinetics of fast surface phenomena on the nanometer scale.