PTR-TOF-MS monitoring of in vitro and in vivo flavour release in cereal bars with varying sugar composition

In the present study, PTR-TOF-MS was applied to better understand the influence of sugar composition on flavour release in a strawberry flavoured cereal bar system. To achieve this, measurements were made both statically from the headspace above cereal bar samples (in vitro) and dynamically from flavour release in the nose space during consumption (in vivo). An artificial strawberry flavour of known constituents (17 flavour active volatile compounds) was used in the preparation of cereal bars. For in vitro measurements, eight samples varying in the glucose syrup solids 42DE to polydextrose ratio were assessed. Measurements clearly showed that the level of glucose syrup solids substitution by polydextrose influenced the release of the added flavour compounds. In addition, distinguishable differences were detected for the release of volatile compounds between samples with different levels of glucose syrup solids and polydextrose during in vivo measurements. The improved mass resolution, sensitivity and speed of PTR-TOF-MS enabled direct comparisons between the rate compounds reached the nose space, maximum nose space concentration of compounds, and the time after which compounds were no longer detected in the nose-space.     

Structural and magnetic properties of pure and Ca-doped LaCoO3 nanopowders obtained by a sol-gel route

Pure and Ca-doped LaCoO3 nanopowders were prepared by a non-alkoxidic sol-gel route using cobalt(II) acetate, lanthanum(III) nitrate and calcium(II) acetate as oxide precursors. The structural evolution and magnetic properties of the samples were studied as a function of thermal treatments in air up to 1273 K. In particular, the microstructure and composition of the systems were analyzed by X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM), and X-ray Photoelectron Spectroscopy (XPS). Both pure and calcium-doped samples annealing at 973 K resulted in the formation of cubic LaCoO3 (average crystallite size <30 nm). This phase was fully retained in the calcium-doped materials even after annealing at higher temperatures, whereas a transition to the rhomboedral polymorph was detected in the pure samples at 1073 K. The magnetic behavior of the nanopowders was investigated as a function of temperature and applied field using both dynamic and static susceptibility measurements. Pure lanthanum cobaltite samples underwent a transition to an ordered state at 88 K, and their magnetic properties changed as a function of thermal treatments. As concerns calcium-doped samples, they ordered ferromagnetically at 171 and 185 K depending on the annealing temperature and displayed open hysteresis loops with coercive fields as large as 1.75 T at low temperatures.     

Myosin heavy chain fibre types and fibre sizes in nuliparous and primiparous ovariectomized Iberian sows: Interaction with two alternative rearing systems during the fattening period

To investigate the effects of the reproductive background (nuliparous/primiparous) on skeletal muscle phenotype and their interaction with two alternative finishing systems (indoors/outdoors) in Iberian sows, 32 contemporary piglets were assigned to four different groups: indoors-nuliparous, indoors-primiparous, outdoors-nuliparous and outdoors-primiparous. Nuliparous sows were ovariectomized at 4 months of age, whereas primiparous were castrated at 14 months of age, after their first lactation. Indoors sows were fattened (2 months prior to slaughter) intensively, whereas outdoors sows were finished in an extensive land with natural resources. Muscle samples (semimembranosus, gluteobiceps) were analyzed for myosin fibre types and fibre sizes. Sows finished out-of-doors had more type I and IIA fibres and smaller fibres than indoor-fattened pigs. Primiparous reared indoors had a significantly lower IIX:IIB fibre ratio and showed a clear tendency for having larger fibres than nuliparous reared indoors. Reproductive background effect interacted with rearing condition effect inducing relevant muscular adaptations. Thus, the influence of reproductive background on muscle characteristics was not significant in sows reared out-of-doors but highly significant in sows finished intensively. This interaction resulted in muscular traits less favourable for meat quality in primiparous vs. nuliparous reared indoors.     

Electrospray ion beam deposition of clusters and biomolecules

An ion beam source using electrospray ionization is presented for nondestructive vacuum deposition of mass-selected large organic molecules and inorganic clusters. Electrospray ionization is used to create an ion beam from a solution containing the nanoparticles or molecules to be deposited. To form and guide the ion beam, radio frequency and electrostatic ion optics are utilized. The kinetic energy distribution of the particles is measured to control the beam formation and the landing process. The particle mass-to-charge ratio is analyzed by in situ time-of-flight mass spectrometry. To demonstrate the performance of the setup, deposition experiments with gold nanoclusters and bovine serum albumin proteins on graphite surfaces were performed and analyzed by ex situ atomic force microscopy. The small gold clusters are found to form three-dimensional agglomerations at the surface, preferentially decorating the step edges. In contrast, bovine serum albumin creates two-dimensional fractal nanostructures on the substrate terraces due to strong intermolecular interactions.     

A new IEEE Std 1459-2000—Compatible time-domain formulation for apparent power

This paper presents the development of new time-domain equations related to the definition of apparent power. These equations are compatible with the IEEE Std 1459-2000 Standard. When the application of these formulations involves an adequate quantity of samples, thus obeying the Nyquist Criterion, they can be utilized without restrictions regarding distortion, imbalance and asymmetry. Thus, they may be used in numeric meters for power measurements. In addition, unlike the above-mentioned standard, they do not oversimplify with respect to the phase and neutral resistance ratio or the percentage of delta-connected and wye-connected loads.     

Environmental Engineering in Mexico

This paper analyzes the current situation of the environmental engineering (ENVE) field in Mexico and proposes some guidelines for future developments, particularly with respect to human resources. In Mexico, the ENVE field has evolved in a disorganized way, such that research, technology development, and human resources education and training (HRET) are all separate activities that do not adequately address national problems. Mexico faces tremendous environmental problems, with very limited economic resources and technically qualified professionals. The total number of environmental engineers in the country in 1998 was around 600, whereas in 1996 it was estimated that 3,500 professionals, 1,500 professors, and 250 researchers were required to sufficiently manage the current level of environmental degradation. The development of an effective HRET program in ENVE must include the improvement of existing programs, development of specialized courses outside of formal programs, and incorporation of new educational strategies; each of these sectors should retain close ties to research groups. At the same time, it is very important to support technology development along with research. The government must undertake the role of coordinating and integrating HRET, research and development, and private sector participation.     

Integrating fuzzy topological maps and fuzzy geometric maps for behavior‐based robots

In behavior‐based robots, planning is necessary to elaborate abstract plans that resolve complex navigational tasks. Usually maps of the environment are used to plan the robot motion and to resolve the navigational tasks. Two types of maps have been mainly used: metric and topological maps. Both types present advantages and weakness so that several integration approaches have been proposed in literature. However, in many approaches the integration is conducted to build a global representation model, and the planning and navigational techniques have not been fitted to profit from both kinds of information. We propose the integration of topological and metric models into a hybrid deliberative‐reactive architecture through a path planning algorithm based on A^* and a hierarchical map with two levels of abstraction. The hierarchical map contains the required information to take advantage of both kinds of modeling. On one hand, the topological model is based on a fuzzy perceptual model that allows the robot to classify the environment in distinguished places, and on the other hand, the metric map is built using regions of possibility with the shape of fuzzy segments, which are used later to build fuzzy grid‐based maps. The approach allows the robot to decide on the use of the most appropriate model to navigate the world depending on minimum‐cost and safety criteria. Experiments in simulation and in a real office‐like environment are shown for validating the proposed approach integrated into the navigational architecture. © 2002 Wiley Periodicals, Inc.