改善烧结法碳酸化分解产品质量的措施

本文简要阐述了提高氧化铝质量的必要性和紧迫性，并从烧结法碳酸化分解工艺着手，简介了碳酸化分解的工艺过程，同时从理论上分析了铝酸钠溶液碳酸化分解过程的变化规律，结合影响碳酸化分解产品质量的多种因素的试验结果，提出了碳分分解温度、分解时间、晶种特性和晶种添加量等是影响碳分产品质量的重要因素。     

扫描电镜在质量事故分析中的应用

应用扫描电镜断口分析、能谱定性分析、光学显微形貌测试等方法 ,针对公司重要产品因细小裂纹而连续四炉产品全部报废的重大质量事故 ,分析了引起报废裂纹缺陷的性质及产生原因。结果表明 :缺陷主要是大量集聚分布的脆性Al2 O3 夹杂及其裂纹 ,属原材料缺陷 ,是冶炼时氧化还原工艺控制不当 ,或加Al量不均匀所致。据此立即采用了相应调整和改进冶炼工艺措施 ,有效消除了原始缺陷 ,迅速提高了产品质量和效益。     

Flow stress and softening behavior of wrought magnesium alloy AZ31B at elevated temperature

1　INTRODUCTIONThewroughtmagnesiumalloyshaveexcellentspecificstrengthandstiffness ,machinability ,dampcapacity ,dimensionalstability ,lowmeltingcostsandare ,hence ,veryattractiveinsuchapplicationsasau tomobile ,aviation ,electronicandcommunicationin dustry[16 ] .Investigationsontheflowstressandsofteningbehaviorofmagnesiumalloysathigherformingtem peratureandstrainratehavebeenanimportantsub jectinwroughtmagnesiumalloysforming[710 ] .InthispapertheflowstressandsofteningbehaviorofAZ31Bdeform…     

焦粉粒度对烧结混合料制粒的影响

摘要：研究了焦粉粒度对烧结混合料制粒的影响,包括焦粉在制粒小球中的分布规律与混合料制粒效果。结果表明：粒度小于0.5mm焦粉主要起黏附粉作用,较为均匀地黏附到各粒级制粒小球中;粒度在0.5~1mm的焦粉作为核颗粒,分布在0.5~1mm、1~3mm制粒小球中的占比总和为81.3%,部分以共核形式存在于3~5mm及以上粒级的制粒小球中;粒度在1~3mm及以上粒级焦粉作为核颗粒分布于相同粒级与大一粒级的制粒小球中;粒度在1~3mm及以上粒级焦粉对烧结混合料制粒无明显影响,粒度小于1mm的焦粉会提高制粒后混合料中小粒径制粒小球的含量,不利于混合料制粒,应尽可能减少焦粉中粒度在05~1mm的含量,将焦粉中粒度小于0.5mm的质量分数控制在20%~30%。     

STUDY OF INTERFACES AND SURFACES OF YBa_2Cu_3O_(7-x)-Ag

Interfaces and surfaces of YBa_2Cu_3O_(7-x)(YBCO)-Ag have been studied by SEM-EDXand AES.No effect of Ag on 123 structure in X-ray diffraction pattern was observedfor 0.4 mol Ag doped YBCO.AES analysis indicated that Ag segregated on surfaceof YBCO and resulted in decrease of YBCO-metal lead resistance.In addition,solutionand segregation of Ag as elemental state were often appeared on interfaces and surfacesof high temperature annealed YBCO,whether elemental Ag or compound Ag_2O andAgNO_3 adopted as doping material.     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。     

飞剪机定尺控制系统的PID调节

介绍了飞剪机的定尺控制系统,给出了定尺控制系统的结构框图,对控制系统的PID调节器运用试凑法进行了参数整定。     

模式飞剪剪切能力分析

通过对热轧精整厚板生产线模式飞剪剪切力在线测试,结合理论计算分析了飞剪的剪切能力,同时采用有限元对刀片和刀架强度、变形进行计算分析,指出现有飞剪存在的问题,为下一步改造提供依据.     

Preparation and mechanical properties of Fe_3Al/Al_2O_3 nano-/micro-composite

1　INTRODUCTIONAlumina(Al2 O3)ceramicsareoftenconsideredforstructuralapplications,duetotheirpropertiesofhighhardness ,chemicalandwearresistanceandgoodmechanicalpropertiesatroomandhightemperature .Thewellknownlimitationfortheseceramics ,how ever ,istheverylowtoughness .Recentstudieshaveshownsignificantimprovementsinmechanicalprop erties ,includingtoughness ,byaddingductilesecondphaseparticles ,suchasNi,Al,MoandCu[14 ] .Anincreaseof 80 % 333%inthefracturetoughnesshasbeenreportedforAl2 O3…     

Synthesis and electrochemical properties of Th-doped LiMn2O4 powders for lithium-ion batteries

To improve the cycle performance of eco-friendly and cost-effective spinel LiMN2O4 as the Li secondary batteries, the Th-doped LiThxMn1-xO4 spinel powers were synthesized by solid-state method. The starting materials, Li2CO3,MnO2 and Th(NO3)4·4H2O, were mixed uniformly using a traditional ball milling, which resulted in a uniform particle size distribution in the mixed powers. Tests of X-ray diffraction, SEM, impedance spectra and charge-discharge were carried out for LiThxMn1-xO4 cathode materials. Results show that the synthesized LiTh0.01Mn1.99O4 material exhibits standard spinel structure, regular particle morphology and excellent property of charge-discharge for big current. The capacity retention of the material modified by doping Th is more than 85.1% of the first discharge specific capacity of 111.5 mAh·g -1 after 20 cycles at the current rate 1C, while the pristine LiMN2O4 is only 57% of the first discharge specific capacity of 110.2 mAh·g-1 after the same cycles at the same current rate.