Optical properties of carbonized sporinite in vitrinite/sporinite blends

A study is made of the morphological and optical properties of a blend of concentrated sporinite and vitrinite macerals (equal parts) from the same coal carbonized between 400–900 °C at 5 °C/min under nitrogen. Two coals of different rank were used and the results compared with properties of unblended carbonized sporinites. Coke from a blend of low-rank vitrinite and sporinite produced a two-phase optical texture, whereas coke from the medium-rank vitrinite and sporinite mixture produced a three-phase optical texture. A ‘Transitional Zone’ of optical texture was observed at interfaces between carbonized vitrinite and sporinite, this zone being wider for the coal of higher rank. The increase of bireflectance in oil with carbonization temperature of the sporinite in the blends was lower than for the carbonized unblended sporinite, caused by a reduction in fluidity of sporinite with blending. The decrease of refractive index for sporinite carbonized > 600 °C in the blends was lower than that of the unblended sporinite.     

Cycle synthesis and optimization of a VSA process for postcombustion CO2 capture

A systematic analysis of several vacuum swing adsorption (VSA) cycles with Zeochem zeolite 13X as the adsorbent to capture CO₂ from dry, flue gas containing 15% CO₂ in N₂ is reported. Full optimization of the analyzed VSA cycles using genetic algorithm has been performed to obtain purity‐recovery and energy‐productivity Pareto fronts. These cycles are assessed for their ability to produce high‐purity CO₂ at high recovery. Configurations satisfying 90% purity‐recovery constraints are ranked according to their energy‐productivity Pareto fronts. It is shown that a 4‐step VSA cycle with light product pressurization gives the minimum energy penalty of 131 kWh/tonne CO₂ captured at a productivity of 0.57 mol CO₂/m³ adsorbent/s. The minimum energy consumption required to achieve 95 and 97% purities, both at 90% recoveries, are 154 and 186 kWh/tonne CO₂ captured, respectively. For the proposed cycle, it is shown that significant increase in productivity can be achieved with a marginal increase in energy consumption. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4735–4748, 2013     

Performance Analysis of Contact Baking of Flat Bread in an Indirect-Heating Oven

A significant portion of Iranian flat breads are produced in semi-industrial, indirect-heating ovens. Therefore, an efficient oven design and a proper selection of operating conditions are crucial to improve the product quality and reduce energy consumption. In the present study, a mathematical model is developed to simulate a semi-industrial, indirect-heating, continuous oven performance during contact baking of an Iranian flat bread, referred to as Taftoon. Individual modes of heat transfer are considered among various components of the baking system to estimate the system performance and the bread quality in terms of design and operating conditions. The predictions of this model are in good agreement with the experimental data. Numerical results indicate that conduction is the primary heat transfer mechanism. Furthermore, the effects of dough thickness, conveyer speed, and input air velocity on the quality of the bread are studied and appropriate ranges for the parameters are determined.     

Saccharomyces cerevisiae for the biosorption of basic dyes from binary component systems and the high order derivative spectrophotometric method for simultaneous analysis of Brilliant green and Methylene blue

In this work, biosorption of Brilliant green (BG) and Methylene blue (MB) dyes in binary mixture onto Saccharomyces cerevisiae were studied. pH at which the biosorption capacity of biomass is maximum was found to be 6 which is close to the pH of natural aqueous solutions. This is a big advantage of S. cerevisiae which makes it applicable for the technology of dye removal from natural aqueous dye solutions. Note that the time for the applied biosorption process for the dye removal is considerably short (about 5 min) which is a big improvement for the adsorption processes. This proves that the S. cerevisiae is a promising adsorbent. The BG and MB dyes were simultaneously analyzed using the fifth and fourth order derivative spectrophotometric method, respectively. Several isotherm models were applied to experimental data and the isotherm constants were calculated for BG and MB dyes. Among the applied models, Freundlich isotherm model showed best fit to the biosorption equilibrium data.     

Analysis of MTHFR and MTRR Gene Polymorphisms in Iranian Ventricular Septal Defect Subjects

Ventricular septal defect (VSD) is one of the most common types of congenital heart defects (CHD). There are vivid multifactorial causes for VSD in which both genetic and environmental risk factors are consequential in the development of CHD. Methionine synthase reductase (MTRR) and methylenetetrahydrofolate reductase (MTHFR) are two of the key regulatory enzymes involved in the metabolic pathway of homocysteine. Genes involved in homocysteine/folate metabolism may play an important role in CHDs. In this study; we determined the association of A66G and C524T polymorphisms of the MTRR gene and C677T polymorphism of the MTHFR gene in Iranian VSD subjects. A total of 123 children with VSDs and 125 healthy children were included in this study. Genomic DNA was extracted from the buccal cells of all the subjects. The restriction fragment length polymorphism polymerase chain reaction (PCR-RFLP) method was carried out to amplify the A66G and C524T polymorphism of MTRR and C677T polymorphism of MTHFR genes digested with Hinf1, Xho1 and Nde1 enzymes, respectively. The genotype frequencies of CC, CT and TT of MTRR gene among the studied cases were 43.1%, 40.7% and 16.3%, respectively, compared to 52.8%, 43.2% and 4.0%, respectively among the controls. For the MTRR A66G gene polymorphism, the genotypes frequencies of AA, AG and GG among the cases were 33.3%, 43.9% and 22.8%, respectively, while the frequencies were 49.6%, 42.4% and 8.0%, respectively, among control subjects. The frequencies for CC and CT genotypes of the MTHFR gene were 51.2% and 48.8%, respectively, in VSD patients compared to 56.8% and 43.2% respectively, in control subjects. Apart from MTHFR C677T polymorphism, significant differences were noticed (p < 0.05) in C524T and A66G polymorphisms of the MTRR gene between cases and control subjects.     

Experimental and computational study of gas–solid fluidized bed hydrodynamics

The hydrodynamics of a two-dimensional gas–solid fluidized bed reactor were studied experimentally and computationally. Computational fluid dynamics (CFD) simulation results from a commercial CFD software package, Fluent, were compared to those obtained by experiments conducted in a fluidized bed containing spherical glass beads of 250– in diameter. A multifluid Eulerian model incorporating the kinetic theory for solid particles was applied in order to simulate the gas–solid flow. Momentum exchange coefficients were calculated using the Syamlal–O’Brien, Gidaspow, and Wen–Yu drag functions. The solid-phase kinetic energy fluctuation was characterized by varying the restitution coefficient values from 0.9 to 0.99. The modeling predictions compared reasonably well with experimental bed expansion ratio measurements and qualitative gas–solid flow patterns. Pressure drops predicted by the simulations were in relatively close agreement with experimental measurements at superficial gas velocities higher than the minimum fluidization velocity, U_mf. Furthermore, the predicted instantaneous and time-average local voidage profiles showed similarities with the experimental results. Further experimental and modeling efforts are required in a comparable time and space resolutions for the validation of CFD models for fluidized bed reactors.     

Bioactive compounds, antioxidant, xanthine oxidase inhibitory, tyrosinase inhibitory and anti-inflammatory activities of selected agro-industrial by-products

Evaluation of abundantly available agro-industrial by-products for their bioactive compounds and biological activities is beneficial in particular for the food and pharmaceutical industries. In this study, rapeseed meal, cottonseed meal and soybean meal were investigated for the presence of bioactive compounds and antioxidant, anti-inflammatory, xanthine oxidase and tyrosinase inhibitory activities. Methanolic extracts of rapeseed meal showed significantly (P < 0.01) higher phenolics and flavonoids contents; and significantly (P < 0.01) higher DPPH and nitric oxide free radical scavenging activities when compared to that of cottonseed meal and soybean meal extracts. Ferric thiocyanate and thiobarbituric acid tests results showed rapeseed meal with the highest antioxidant activity (P < 0.01) followed by BHT, cotton seed meal and soybean meal. Rapeseed meal extract in xanthine oxidase and tyrosinase inhibitory assays showed the lowest IC(50) values followed by cottonseed and soybean meals. Anti-inflammatory assay using IFN-γ/LPS stimulated RAW 264.7 cells indicated rapeseed meal is a potent source of anti-inflammatory agent. Correlation analysis showed that phenolics and flavonoids were highly correlated to both antioxidant and anti-inflammatory activities. Rapeseed meal was found to be promising as a natural source of bioactive compounds with high antioxidant, anti-inflammatory, xanthine oxidase and tyrosinase inhibitory activities in contrast to cotton and soybean meals.     

Convenient synthesis of benzamides mediated by poly(4‐vinylpyridine)‐supported benzoyl chloride

The use of polymeric reagents simplifies the routine acylation of amines because it eliminates traditional purification. In this article, the use of readily available crosslinked poly(4‐vinylpyridine)‐supported benzoyl chloride as an acylating agent of amines in the presence of K₂CO₃ in n‐hexane is described. The product was readily obtained by the filtration and evaporation of the solvent. The spent polymeric reagent could be regenerated and reused. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

利用扩展Tao-Mason状态方程预测天然气混合物容积特性(p-V-T)

A statistical-mechanical-based equation of state(EOS)for pure substances,the Tao-Mason equation of state,is successfully extended to prediction of the(p-v-T)properties of fourteen natural gas mixtures at temperatures from 225 K to 483 K and pressures up to 60.5 MPa.This work shows that the Tao-Mason equation of state for multicomponent natural gas is predictable with minimal input information,namely critical temperature,critical pressure,and the Pitzer acentric factor.The calculated results agree well with the experimental data.From a total of 963 data of density and 330 data of compressibility factor for natural gases examined in this work,the average absolute deviations(AAD)are 1.704%and 1.344%,respectively.The present EOS is further assessed through the comparisons with Peng-Robinson(PR)equation of state.For the all of mixtures Tao-Mason(TM)EOS outperforms the PR EOS.     

Measurement of in-plane effective thermal conductivity in PEM fuel cell diffusion media

Gas diffusion media used in polymer electrolyte membrane (PEM) fuel cells are highly anisotropic with significantly different transport property values in the through- and in-plane directions. In this study, experimental measurements of the in-plane effective thermal conductivity k for gas diffusion media used in PEM fuel cells have been carried out using a parallel thermal conductance technique. Conductivity values are measured at a mean sample temperature of 70 °C for six different material types and two different orientations in order to quantify the effect of PTFE content on thermal conductivity and to reveal any anisotropic behavior. The results vary from a minimum of k = 3.54 W/(m °C) to a maximum value of 15.1 W/(m °C) for various samples and configurations tested in this study, with an uncertainty between 1% and 2% for all the cases investigated.