Structure-property relations in ZrCN coatings for tribological applications

ZrCN coatings were deposited by dc reactive magnetron sputtering with N₂ flows ranging from 2 to 10 sccm in order to investigate the influence of the nitrogen incorporation on structure and properties. Information about the chemical composition was obtained by glow discharge optical emission spectroscopy and Rutherford backscattering spectroscopy. The evolution of the crystal structure studied by X-ray diffraction revealed the formation of a face-centred cubic ZrCN phase for N₂ flows greater than 4 sccm. Additionally, the presence of an amorphous phase in the coatings deposited with the highest N₂ flows could be evidenced by Raman spectroscopy and X-ray photoelectron spectroscopy. This phase can act as a lubricant resulting in a low coefficient of friction as shown in the conducted ball-on-disc tests. Nanoindentation measurements showed that coatings deposited with a 6 sccm N₂ flow had the maximum hardness which also revealed the best performance in the conducted dry cutting tests.     

Structure, mechanical properties and oxidation behaviour of arc-evaporated NbAlN hard coatings

Nb_1 − xAl_xN hard coatings were synthesised by cathodic arc-evaporation in order to study the influence of the Al concentration on crystal structure, mechanical properties and oxidation resistance. Structural investigations by X-ray diffraction revealed a transition from the face-centered cubic structure of δ-NbN to the wurtzite structure of AlN at x = 0.45… 0.56 depending on the deposition parameters. The maximum values of the mechanical properties like hardness and residual stress obtained by nanoindentation and biaxial stress temperature measurements, respectively, were found for the coatings with cubic structure and generally decrease with increasing Al content. On the other hand, higher Al concentrations are beneficial in terms of oxidation resistance as shown by annealing experiments in ambient air. The onset temperature for oxidation rises from 600 to 700 °C for Nb_0.73Al_0.27N to above 800 °C for Nb_0.29Al_0.71N regardless of changes in the crystal structure.     

Sugar fatty acid ester surfactants: Base-catalyzed hydrolysis

Rate constants for the base-catalyzed hydrolysis of sucrose laurate, sucrose α-sulfonyl laurate, and sucrose α-ethyl laurate were measured at several temperatures in pH 11 buffer. Activation energies and Arrhenius factors for the hydrolysis reactions were determined. At 27°C, sucrose laurate hydrolyzed fastest and sucrose α-ethyl laurate slowest. Activation energies and Arrhenius factors showed that both steric and electronic factors affect the rates of ester hydrolysis. Other work has shown that bacterial hydrolysis of sugar fatty acid esters is inhibited in the presence of either α-sulfonyl or α-alkyl groups. A kinetic study of base-catalyzed ester hydrolysis has revealed reasons for the inhibition of bacterial hydrolysis and provided information regarding ester stability at elevated pH.     

Development of reactions of silacyclopropanes as new methods for stereoselective organic synthesis

In this Account, we describe the development of stereospecific, stereoselective, regioselective, and chemoselective carbon-carbon bond-forming reactions of silacyclopropanes that occur under mild conditions. By appropriate choice of metal salt catalyst, the regiochemistry of these reactions may be tuned to give the desired product. Stereoselective nucleophilic substitution reactions and stereospecific oxidation of the C-Si bond to a carbon-oxygen bond demonstrate that the products of these reactions serve as useful intermediates for the synthesis of polyoxygenated organic molecules.     

Sugar fatty acid ester surfactants: Structure and ultimate aerobic biodegradability

Ultimate aerobic biodegradabilities of an array of sugar ester surfactants were determined by International Standards Organisation method 7827, “Water Quality—Evaluation in an Aqueous Medium of the Aerobic Biodegradability of Organic Compounds, Method by Dissolved Organic Carbon” (1984). The surfactants were nonionic sugar esters with different-sized sugar head groups (formed from glucose, sucrose, or raffinose) and different lengths and numbers of alkyl chains [formed from lauric (C₁₂) or palmitic (C₁₆) acid]. Analogous anionic sugar ester surfactants, formed by attaching an α-sulfonyl group adjacent to the ester bond, and sugar esters with α-alkyl substituents were also studied. It was found that variations in sugar head group size or in alkyl chain length and number do not significantly affect biodegradability. In contrast, the biodegradation rate of sugar esters with α-sulfonyl or α-alkyl groups, although sufficient for them to be classified as readily biodegradable, was dramatically reduced compared to that of the unsubstituted sugar esters. An understanding of the relationship between structure and biodegradability provided by the results of this study will aid the targeted design of readily biodegradable sugar ester surfactants for use in consumer products.     

Results of an inter-laboratory comparison of methods for quantitative clay analysis

In a comparison of analytical methods in clay mineralogy, two clay samples (from Hennersdorf and Freydegg) of different clay composition were analyzed by 19 laboratories mainly by XRD. Participants used different methods of pre-treatment, preparation, analysis and evaluation.In spite of the diversity of analytical methods applied, reasonable conformity in quantitative results was obtained for the associated minerals (quartz, calcite and dolomite). On the other hand, qualitative identification of the clay minerals showed considerably stronger divergencies, causing a stronger deviation of quantitative data; analysis of the Freydegg sample proved to have been particularly difficult. The evaluation methods of the different participants were examined to determine whether similar methods provided results that could be more easily compared.In addition, the authors calculated the clay mineral composition according to three different recognized methods, using the same diffractograms and same preparation and measuring conditions. In spite of this, different results were obtained.In the next phase of the programme, an inter-laboratory comparison of methods will be achieved under exactly defined conditions of preparation and analysis.     

Humidity‐dependent bending recovery and relaxation of human hair

The time‐dependent bending recovery of human hair fibers was investigated for a variety of relative humidities and aging times. The data were analyzed on the basis of a viscoelastic filament/matrix model and the Denby‐equation, containing the parameter K as the ratio of the elastic bending rigidities of the matrix and the filaments and the Kohlrausch‐Williams‐Watts (KWW) function as relaxation function. The first stage of the analysis ascertained that the recovery curves shift with aging time on the time scale with the expected aging rate of μ ≈ 1. The second stage showed that the shape factor of the KWW function exhibits a mean value across the aging and humidity range of m = 0.28, which is close to the “universal” value of 1/3. On this basis, it was found that virtually no change occurs for the modulus ratio for low water contents up to about 10%, being constant at K₀= 6 .1, while linearly decreasing beyond this threshold. The reduced, characteristic relaxation time drops on the log‐time scale from logτ_r(0) = 0.47 for the dry fiber linearly with water content, covering about two thirds of a decade for 0–20% water content. With the pronounced humidity dependence of the parameters, hair shows what is termed hydro‐rheologically complex (HRC) in analogy to thermo‐rheologically complex behavior. Using the HRC approach, the dynamical mechanical performance of hair (1 Hz) was calculated for a range of water contents and aging times and found to be in good general agreement with experimental data. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effects of Weight Loss on Lipid Transfer Proteins in Morbidly Obese Women

Obesity is associated with lipid abnormalities leading to an increased morbidity and mortality from atherosclerotic disease. Lipid transfer proteins such as Cholesteryl Ester Transfer Protein (CETP) and Phospholipid Transfer Protein (PLTP), and lipases such as lipoprotein lipase (LPL) and hepatic lipase (HL) are involved in the pathogenesis of the obesity associated proatherogenic dyslipidemia. Nineteen severely obese female subjects undergoing laparosopic gastric banding participated in this prospective study. Subjects were examined with respect to body composition, lipid profile, CETP, PLTP, LPL and HL before and 1 year after surgical treatment. Mean weight loss was 22.2 kg, mainly due to losses in the fat depots. Triglycerides decreased and HDL₂-C increased significantly. In respect to transfer proteins mean CETP mass decreased from 1.82 to 1.71 μg mL^?1 (P = 0.043) and mean PLTP activity was reduced from 7.15 to 6.12 μmol mL^?1 h^?1 (P = 0.002), in parallel. In addition, both mean LPL activity and mean HL activity tended to decrease from 297 to 248 nmol mL^?1 h^?1 for LPL (P = 0.139) and from 371 to 319 nmol mL^?1 h^?1 for HL (P = 0.170), respectively. We conclude that weight loss induced by bariatric surgery is associated with the amelioration of the obesity-associated dyslipidemic state. This improvement may be attributable to decreased mass and action of the adipocyte tissue derived lipid transfer proteins CETP and PLTP.     

Effect of N-Vinyl-2-Pyrrolidone (NVP), a Bromodomain-Binding Small Chemical,on Osteoblast and Osteoclast Differentiation and Its Potential Application for Bone Regeneration

The human skeleton is a dynamic and remarkably organized organ system that provides mechanical support and performs a variety of additional functions. Bone tissue undergoes constant remodeling; an essential process to adapt architecture/resistance to growth and mechanical needs, but also to repair fractures and micro-damages. Despite bone’s ability to heal spontaneously, certain situations require an additional stimulation of bone regeneration, such as non-union fractures or after tumor resection. Among the growth factors used to increase bone regeneration, bone morphogenetic protein-2 (BMP2) is certainly the best described and studied. If clinically used in high quantities, BMP2 is associated with various adverse events, including fibrosis, overshooting bone formation, induction of inflammation and swelling. In previous studies, we have shown that it was possible to reduce BMP2 doses significantly, by increasing the response and sensitivity to it with small molecules called “BMP2 enhancers”. In the present study, we investigated the effect of N-Vinyl-2-pyrrolidone (NVP) on osteoblast and osteoclast differentiation in vitro and guided bone regeneration in vivo. We showed that NVP increases BMP2-induced osteoblast differentiation and decreases RANKL-induced osteoclast differentiation in a dose-dependent manner. Moreover, in a rabbit calvarial defect model, the histomorphometric analysis revealed that bony bridging and bony regenerated area achieved with NVP-loaded poly (lactic-co-glycolic acid (PLGA) membranes were significantly higher compared to unloaded membranes. Taken together, our results suggest that NVP sensitizes BMP2-dependent pathways, enhances BMP2 effect, and inhibits osteoclast differentiation. Thus, NVP could prove useful as “osteopromotive substance” in situations where a high rate of bone regeneration is required, and in the management of bone diseases associated with excessive bone resorption, like osteoporosis.     

Bootstrap Unit‐Root Tests: Comparison and Extensions

Abstract. In this article, we study and compare the properties of several bootstrap unit‐root tests recently proposed in the literature. The tests are Dickey–Fuller (DF) or Augmented DF, based either on residuals from an autoregression and the use of the block bootstrap or on first‐differenced data and the use of the stationary bootstrap or sieve bootstrap. We extend the analysis by interchanging the data transformations (differences vs. residuals), the types of bootstrap and the presence or absence of a correction for autocorrelation in the tests. We show that two sieve bootstrap tests based on residuals remain asymptotically valid. In contrast to the literature which focuses on a comparison of the bootstrap tests with an asymptotic test, we compare the bootstrap tests among themselves using response surfaces for their size and power in a simulation study. This study leads to the following conclusions: (i) augmented DF tests are always preferred to standard DF tests; (ii) the sieve bootstrap performs better than the block bootstrap; (iii) difference‐based tests appear to have slightly better size properties, but residual‐based tests appear more powerful.