Effect of Methionine Supplementation on Nitrogen Balance in Infants Fed a Low-Cost Soy-Oats Formula

A nitrogen balance study, comparing a low-cost soy-oats infant formula with and without supplemental methionine, was carried out with infants of ages 3 - 26 months at a single equivalent level of nitrogen intake (approximately 850 mg/kg/day). Nitrogen retention was found to be unaffected by methionine supplementation. Com- parison of data obtained in this study with previous research re- vealed that a critical value for intake of total L-sulfur amino acids apparently exists in infants 3 - 26 months of age, below which methionine supplementation will increase nitrogen retention, but above which it will not. This value appears to coincide with that of 49 mg/kg/day recommended for infants by the FNB.     

Influence of weld misalignment and weld metal overmatch on the prediction of fracture in pipeline girth welds

$\text{J-}\text{integral}$ estimates using elastic-plastic finite element calculations, are shown to compare well with experimental results from single edge-notch bend (SENB) specimens made of X483 grade line pipe steel.The influence of weld misalignment and weld metal overmatch on fracture of cracked girth welds is predicted, also using elastic-plastic finite element calculations. Weld metal overmatch reduces plastic strain levels in the weld and appears beneficial in reducing $\text{J-}\text{integral}$ magnitudes. Predicted values of $\text{J-}\text{integral}$ are shown to increase with weld misalignment. However, $\text{J-}\text{integral}$ magnitudes near the critical value for crack growth initiation were only attained after considerable plastic straining at or near limit load. This result suggests that limit load calculations may be more appropriate for prediction of failure of cracked girth welds than conventional fracture techniques.     

Application-Specific Instruction-Set Processor for Retinex-Like Image and Video Processing

This brief presents an application-specific instruction-set processor (ASIP) for real-time Retinex image and video filtering. Design optimizations are addressed at algorithmic and architectural levels, the latter including a dedicated memory structure, an adapted pipeline, bypasses, a custom address generator and special looping structures. Synthesized in CMOS technology, the ASIP stands for its better energy-flexibility tradeoff versus reference ASIC and digital signal processing Retinex implementations.     

Comparison of the efficacy of oxidative processes and flocculation for the removal of colour from Eop effluent.

Up to 30% of the released colour arising from bleached kraft pulp and paper production comes from the alkaline extraction stage. This waste stream can therefore be readily targeted to remove colour at source in mills where improved colour management is required. The efficacy of five advanced oxidative treatment and physico-chemical technologies in removing colour from a typical Eop stage effluent was compared. The most effective oxidative treatment was peroxymonosulphate (79% colour removal in 15 minutes). Ozone and TAML treatments removed 74% and 58% of colour respectively within 30 minutes. In comparison, hydrogen peroxide alone was only able to remove 35% of the colour over 4 hours. Coagulation with polyaluminium chloride achieved 89% colour removal within 5 minutes. However, this treatment produced an undesirable sludge, and may cause toxicity in the treated wastewater. Overall, colour removal ability of the five technologies ranked from highest to lowest was polyaluminium chloride > peroxymonosulfate > ozone > TAML > hydrogen peroxide. Other factors, such as operating costs, feedstock modification and capital infrastructure, also need to be taken into account when selecting the most suitable colour management option.     

Ochratoxin A in pork kidneys--description of a method

A rapid procedure for the isolation and clean-up on a silica gel column is described for the determination of Ochratoxin A from pork kidneys. The detection limit is 0.3 microgram/kg.     

Probability method of controlling the consumption of safe life of agte parts by the limiting temperature criterion

A method is proposed for predicting the residual safe life of aircraft engine parts. It facilitates limiting temperature-based control of the depletion, during operation, of durability reserves set when designing these parts. The method is based on probability comparison of in-flight temperature maxima of the parts with limiting temperatures of their materials. The method of least squares is recommended for evaluating the parameters of distributions of in-flight temperature maxima and limiting temperatures that are described by extreme type laws. A series of integral relationships necessitating the use of numerical methods are obtained for the residual gamma-percent safe life of the parts.Translated from Problemy Prochnosti, No. 10, pp. 54–58, October, 1991.     

Microstructure of Selected Binary Food Powder Mixtures

Binary mixtures of sugar, citric acid, malic acid, soy protein and starch, after exposure to various relative humidities, were analyzed by Scanning Electron Microscopy (SEM). It is shown that depending on interparticle surfaceaffinity, concentration and relative humidity, the mixtures could be random, partially random, ordered or partially ordered. The type of bridging, between the aggregated particles depended on their chemical species and the availability of surface moisture.     

Development of a simple low-cost solar simulator for indoor collector testing

Indoor test methods for solar collectors are widely accepted and recommended by ASHRAE. The development of a solar simulator for indoor testing and the certification procedure for photo-thermal solar devices is discussed in this paper. The system consists of 14 quartz halogen lamps and provides a testing area of about 1 × 1 m. The irradiance can be varied from 400 to 1500 W/m². This is achieved by varying the input power supplied to individual lamps. The radiation output characteristics of a single lamp have been studied. The distribution of intensity over the covered area of 1·20 × 1·20 m has been recorded using a precision Eppley pyranometer.A variety of collectors—evacuated tubular collectors and flat-plate collectors of both liquid and air heating types—has been tested under sufficiently stable insolation conditions. Results for a conventional solar air heater are presented together with suggestions for further improvements.     

Oxygen consumption by portal-drained viscera of cattle: comparison of analytical methods and relationship to whole body oxygen consumption

Two experiments were conducted to compare methods of determining oxygen consumption by portal-drained viscera and to relate this consumption to total oxygen consumption by lactating dairy cows. Oxygen consumption was the product of portal blood flow (determined by dilution of dye infused into a mesenteric vein) and portal-arterial concentration differences of oxygen. In Experiment 1, portal-arterial concentrations of oxygen were determined in samples from three cows using equations based on blood pH, hemoglobin, partial pressure of carbon dioxide, and partial pressure of oxygen (method 1) or by direct oxygen determination with an oximeter (method 2). Overall, there were no differences in oxygen concentrations or oxygen consumption by portal-drained viscera between methods. In Experiment 2, oxygen consumption by portal-drained viscera (method 2) and total oxygen consumption were measured in two lactating cows. Oxygen consumption by portal-drained viscera accounted for 18% of total oxygen consumption.     

The effects of stress and crack morphology on time-of-flight diffraction signals

A model based on the theory of infinite contacting surfaces is used to analyse the transmission and reflection of ultrasound at tight fatigue cracks under compressive stress. The model developed is valid for both compression and shear (SV) waves incident at arbitrary angles on a fatigue crack and includes mode conversion effects. In discussing diffraction of ultrasound by the tips of finite length fatigue cracks, we associate the amplitude of the diffracted signal with the strength of the signal reflected from cracks of infinite extent. Thus we allow all the energy transmitted by the tight crack to play no part in the diffraction process. Comparison is made with experiments carried out at Harwell and we conclude that, for these particular experiments, the cracks are fully open when subjected to about 88 MPa of tension, and that the experimental results are consistent with a root mean square deviation from flatness of the crack faces of about 1·5 μm. This is in broad agreement with the actual crack profile when a sampling length of about 30 μm is used. Using these values the theory and experiment show excellent agreement to within 2 dB over the whole applied stress range. The results show, for example, a diffraction signal decreased by a maximum of about 13 dB when the applied compressive load corresponds to 70% of the maximum load used during crack growth. Similar conclusions are also drawn for conventional pulse-echo inspection, whereas Tandem suffers a greater reduction in signal strength due to the usually lower frequency.