流动床离子交换工艺在己二酸催化剂回收中的应用

介绍流动床离子交换装置回收催化剂的生产工艺，从交换装置的选择到运行，分析了流动床的优点、影响因素以及生产中应注意的问题和要求。     

指数曲线贮仓的设计剖析

贮仓是许多工业过程中的常用设备，起拱是贮仓使用时常出现的故障，如何解决起拱问题是贮仓设计的关键，除常采取增大仓壁倾角、设置破拱装置等方法外，设计成曲线贮仓也是行之有效的措施之一。分析了指数曲线贮仓的工作原理和特点，建立了仓壁指数曲线方程，阐述了设计步骤与注意事项，并举例说明。     

Vinyl‐containing silicone resin as the crosslinking agent of heat‐curable silicone rubber

Heat‐curable silicone rubber (HCSR) was prepared by using vinyl‐containing silicone resin (VSR) as the crosslinking agent instead of polyvinylsilicone oil (C gum). Mechanical properties and crosslink density of the vulcanizates were measured. The results indicate that VSR is a good crosslinking agent for HCSR. The tensile strength, tearing strength, elongation at break, and hardness of the vulcanizate can reach 10.2 MPa, 29.1 kN/m, 720%, and 58 SHA, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3123–3127, 2002; DOI 10.1002/app.10054     

固体酸催化合成草酸二乙酯的应用研究

以粉煤灰、活化剂、硫酸为主要原料经活化、陈化、浸泡、焙烧等处理制得的固体酸催化剂，应用于草酸二乙酯的合成中取得了良好的催化效果。实验发现，当醇酸摩尔比为3．5、催化剂用量为草酸的5％、反应时间在4h时，酯产率可达81.8％，该催化剂具有贮存稳定性高、可重复使用、制备工艺简单、原料成本低廉等特点，是一种易于工业化应用的环境友好固体酸催化剂。     

Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.     

The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process

The structure of benzoxazines is similar to that of phenolic resin through thermal self‐curing of the heterocyclic ring opening reaction that neither requires catalyst nor releases any condensation byproduct. These polybenzoxazine resins have several outstanding properties such as high thermal stability and high glass transition temperature. To better understand the curing kinetics of this copolybenzoxazine thermosetting resin, dynamic and isothermal differential scanning calorimetry measurements were performed. Three models, the Kissinger method, the Flynn–Wall–Osawa method, and the Kamal method, were used to describe the curing process. Dynamic kinetic activation energies based on Kissinger and Flynn–Wall–Osawa methods are 72.11 and 84.06 KJ/mol, respectively. The Kamal method based on an autocatalytic model results in a total order of reaction between 2.66 and 3.03, depending on curing temperature. Its activation energy and Arrhenius preexponential are 50.3 KJ/mol and 7959, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 730–737, 2005     

Mathematical model of deoxidization with post stirring in a combined blowing converter

Dissolved oxygen in the steel at the terminal of the converter smelting process is the main cause for the formation of oxide inclusions, and the high terminal oxygen content worsens the steel cleanness. However, post stirring in a combined blowing converter can promote the carbon-oxygen reaction in the liquid steel and reduce the dissolved oxygen content at the terminal of the converter smelting process. Thus, the mathematical model of deoxidization in the post stirring process was obtained, and the rationa...     

基于JavaScript的HTML＋MathML通用方案的设计与实现

MathML是一个W3C推荐标准.目前,测览器对MathML的支持比较复杂,(X)HTML+MathML存在多种文档方案,这些方案对运行环境往往有一定的要求和限定,为适应多样化应用的需要,必须考虑保留多种文档方案,导致了数据的大量冗余.本文阐述了现有(X)HTML+MathML文档方案的局限性,提出了一种基于JavaScript的HTML+MathML通用方案.该方案使用JavaScript包含MathML,使得同一个HTML+MathML文档能够实现跨平台、跨浏览器、跨插件的应用,简洁实用,有效地解决了通用性的应用需求.     

建设工程涉外设计合同风险防范

中国参加WTO后,在扩大对外开放、拉动内需保增长政策指导下,一大批重点建设工程陆续上马,有许多外国设计企业及其在华机构加入中国建设工程的设计,其中,国有独资项目占据很大的比重。笔者结合参与全国十运会场馆一南京奥体中心以及江苏省人民医院扩建、南京图书管等多个大型项目工程全程法律保障实践,就工程设计合同风险防范,一舒管见。