Serial measurements of body composition in obese subjects during a very-low-energy diet (VLED) comparing bioelectrical impedance with hydrodensitometry

Bioelectrical impedance analysis (BIA) is a convenient, inexpensive, and noninvasive technique for measuring body composition. BIA has been strongly correlated with total body water (TBW) and also has been validated against hydrodensitometry (HD). The accuracy and clinical utility of BIA and HD during periods of substantial weight loss remain controversial. We measured body composition in moderately and severely obese patients serially using both methods during a very-low-energy diet (VLED). Mean initial weight in these patients was 116 (+/-30) kg (range, 74-196 kg). Mean weight loss was 24 (+/-13) kg with a decrease in fat mass (FM) by HD of kg (p < 0.001) and a decrease in fat-free mass (FFM) of 3.6 kg (p < 0.05). Loss of FFM is best predicted by the rate (kg/wk) of weight loss (r2 = 0.86, p < 0.0001). FFM, as predicted from BIA equations, was highly correlated with FFM as estimated by HD during all testing sessions (r = 0.92-0.98). Although highly correlated, BIA overestimated FFM relative to HD and this difference appeared to be more pronounced for taller patients with greater truncal obesity. Although the discrepancy was no greater during weight-loss treatment, the level of disagreement was considerable. Therefore, the two methods cannot be used interchangeably to monitor relative changes in body composition in patients with obesity during treatment with VLED. The discrepancy between BIA and HD may be caused by body mass distribution considerations and by perturbations in TBW which affect the hydration quotient for FFM (BIA) and/or which affect the density constants for FFM and FM (HD).     

Computation of Running Averages

This brief presents and compares several recursive and nonrecursive techniques for the efficient computation of the running average of discrete signals. First of all, the standard recursive algorithm is considered and its long-term accuracy is assessed when the floating-point arithmetic is employed. A cheap refreshing strategy is proposed as a means of keeping the computed value close enough to the exact one. Then, two alternative nonrecursive algorithms, requiring only log₂N additions, are developed, which are as reliable and accurate as the direct implementation     

A broadband multimedia collaborative system for advancedteleradiology and medical imaging diagnosis

This paper presents a new telemedicine system currently in routine clinical usage, developed within the European Union (EU) ACTS BONAPARTE project. The telemedicine system is developed on an asynchronous transfer mode (ATM) multimedia hardware/software platform comprising the following set of telemedicine services: synchronous cooperative work, high-quality video conference, multimedia mail, medical image digitizing, processing, storing and printing, and local and remote transparent database access. The medical information handled by the platform conforms to the Digital Imaging and Communications in Medicine (DICOM) 3.0 medical imaging standard. The telemedicine system has been installed for clinical routines in three Spanish hospitals since November 1997 and has been used in an average of one/two clinical sessions per week. At each clinical session, a usability and clinical evaluation of the system was carried out. Evaluation is carried out through direct observation of interactions and questionnaire-based subjective data. The usability evaluation methodology and the results of the system usability study are also presented in this article. The experience gained from the design, development, and evaluation of the telemedicine system is providing an indepth knowledge of the benefits and difficulties involved in the installation and clinical usage of this type of high-usability and advanced multimedia telemedicine system in the field of teleradiology and collaborative medical imaging diagnosis     

Multiservice platforms for data services

The potential for broadband and data services is large and continues to expand for the foreseeable future. Consideration of the cost-effective delivery and support of both new, advanced services, as well as existing services, has led to the driver for multiservice platforms (MSPs). The cost effectiveness results from the MSP potential to share network bandwidth between services, offer a potential simplification of the operational support systems (OSS), and enable new service features and functions. A generic ATM-based MSP is described in this paper where issues of service support, service interworking, operations and maintenance, and network architecture are discussed. The paper is intended as a tutorial on the concepts.     

Passive alignment optical subassemblies for military/aerospacefiber-optic transmitter/receiver modules

Under the DARPA sponsored Avionics Optoelectronic Module Technology program, new passive alignment carrier (PAC) optical subassemblies (LED-PAC and PIN-PAC) ruggedized for military/aerospace avionics fiber-optic transmitter and receiver applications have been developed, LED-PAC and PIN-PAC silicon micro-optical bench substrates were fabricated together on a 5 in diameter silicon wafer via multistage photolithography, thin-film, and substrate processing. Alignment v-grooves designed for passive optical alignment of 100/140 μm multimode optical fiber to the optoelectronic devices were terminated by solder locking the fiber to the silicon PAC substrates. The LED-PAC comprising a surface emitting LED die-bonded onto a novel precision molded AM submount passively mounted onto the silicon microbench achieves the required high coupling efficiency to 100/140 μm multimode optical fiber to meet stringent avionics transmitter output power requirements. The 100/130 μm multimode optical fiber-pigtailed PIN-PAC with a refractive lens etched into the p-i-n photodiode backside surface exhibited responsivities greater than 0.8 A/W at 1.3 μm wavelength. The LED-PAC and PIN-PAC optical subassemblies integrated with Boeing ARINC 636 (FDDI) transmitter and receiver thick film multichip (MCM-C) circuitry are capable of meeting both ARINC 636 and FDDI physical layer requirements     

Light and Strong SiC Networks

The directional freezing of microfiber suspensions is used to assemble highly porous (porosities ranging between 92% and 98%) SiC networks. These networks exhibit a unique hierarchical architecture in which thin layers with honeycomb‐like structure and internal strut length in the order of 1–10 μm in size are aligned with an interlayer spacing ranging between 15 and 50 μm. The resulting structures exhibit strengths (up to 3 MPa) and stiffness (up to 0.3 GPa) that are higher than aerogels of similar density and comparable to other ceramic microlattices fabricated by vapor deposition. Furthermore, this wet processing technique allows the fabrication of large‐size samples that are stable at high temperature, with acoustic impedance that can be manipulated over one order of magnitude (0.03–0.3 MRayl), electrically conductive and with very low thermal conductivity. The approach can be extended to other ceramic materials and opens new opportunities for the fabrication of ultralight structures with unique mechanical and functional properties in practical dimensions.     

License Plate Recognition for Parking Control System by Mathematical Morphology

Nowadays, license plate recognition for parking systems is a critical task to provide automatic control of customers and payment. This paper introduces a new method for automatic recognition of license plates of vehicles by mathematical morphology.The proposed method can provide the license plate number of the plates in different light conditions, colors,sizes, and inclination(angles). The algorithm can recognize the license plates of European Union vehicles quickly and correctly. The pattern learning of mathematical skeletons has high efficiency in the process. The performance of the algorithm is demonstrated well by the test in a parking control system.     

Particle-Swarm Optimization in Antenna Design: Optimization of Log-Periodic Dipole Arrays

This paper presents a short tutorial and overview of optimization algorithms based on particle-swarm schemes, and their application to solving electromagnetic problems. As a practical example, a particle-swarm optimization (PSO) tool has been applied in conjunction with the Numerical Electromagnetics Code (NEC) to get the design curves of optimized log-periodic dipole arrays (LPDAs). The graphs show the performance of several radiation parameters (directive gain, front-to-back ratio, bandwidth, SWR, and half-power beamwidth in the E and H planes) as a function of typical design parameters of log-periodic dipole arrays (geometrical parameters and characteristics of the feed). Examples of optimized antennas are given, and their performance is compared to that of standard log-periodic dipole arrays.     

SDR receiver computational model for application in power control

Software-defined radio (SDR) permits dynamic switches of the employed radio access technology (RAT), over-the-air (OTA) software updates, software and hardware reuse. This extended flexibility comes at the price of a higher computing complexity and, in particular, the energy consumption at the receiver. The analysis of the computational profile of signal processing algorithms is of great importance in SDR for understanding the implication on the energy consumption. Several signal processing algorithms show a different profile as a function of the signal quality perceived at the receiver antenna. Therefore, power control policies have an implication on the computational performance of SDR receivers. Understanding the behaviour of these algorithms allows trading transmitted power against receiver energy consumption. This paper presents a model for characterizing the computational profile of Turbo and LDPC decoders and demonstrates is applicability in existing power control strategies.