棒材连续剪切产生偏剪原因分析及解决措施

对棒材在摆剪连续剪切过程中出现跑偏的原因，进行了探讨和分析。并采取有效措施进行消除。解决了长期影响摆剪使用寿命及剪切质量的偏剪难题。     

Detection of cytomegalovirus in semen from a population of men seeking infertility evaluation

This paper presents the results of in vivo measurements on a worker from a fuel reprocessing plant who was involved in an actinide intake. The results revealed that false indications of an actinide lung burden could arise from a contaminant present elsewhere in the chest region. Consequently, it is important that lung monitoring programs for occupational workers handling actinides are conducted with this caution in mind and that due consideration is given even in cases of minor cuts/wounds in order to rule out substantial overestimation of internal radiation doses.     

商务智能在ERP系统中的应用

ERP系统属于典型的联机事务处理系统,不可避免的存在许多不足,无法提供企业决策所需的决策信息。商务智能是一种正在快速发展的技术,它在ERP中的应用有效的解决ERP存在的问题。     

土钉加锚杆联合支护基坑的失稳分析及处理

根据具体工程实例,介绍了在基坑开挖时采用土钉加锚杆的联合支护方式后在施工过程中出现坍塌裂缝的现象,针对这一现象,分析了施工条件与环境,得出了事故发生的原因,并结合实际情况提出了处理措施.     

带传动摆架式自动张紧装置的张紧力计算

基于带传动在稳定工作时的受力平衡，从理论上导出了摆架式自动张紧装置所产生的张紧力的计算公式。结果表明：只要合理选择计算安装参数，其张紧力总能满足张紧条件的要求，以对张紧装置进行设计计算；并指出该装置产生的张紧力，具有随外载荷变化而自动调节的性能，使传力零件部分卸载。     

Effect of Post Annealing on the Microstructure and Magnetic Properties of NdFeB/α-Fe/NdFeB Thin Films

A series of nanocomposite thin films, composed of Nd2Fe14B and α-Fe, has been prepared by DC-magnetron sputtering combined ion beam sputtering onto Si (100) substrates. The effects of post annealing on the microstructure and magnetic properties of [NdFeB/α-Fe/NdFeB]-type thin films have been investigated. The X-ray diffraction (XRD) study showed that annealing of the films for 30min at temperatures 550,600,650,700℃ resulted in the appearance of diffraction peaks, characteristic for Nd2Fe14B tetragonal structure, α-Fe and Nd2O3 phases. The investigation using the Vibrating Sample Magnetometer (VSM) with a maximum applied field of 2 T indicated that with the increase of the annealing temperature, the magnetic properties of the multilayer films were improved and reached peak value at 650℃ (Hci=41.72kA·m-1, Mr/Ms=0.4, (BH)max=30.35kJ·m-3), after which the magnetic properties were decreased greatly. Along with the increase of the thickness of α-Fe layer from Tα-Fe16nm, the coercivity Hci, saturation magnetization Ms, and remanence ratio Mr/Ms all declined. As the Atomic Force Microscope (AFM) indicated, after being annealed at 650℃ for 30min, the sample was showed fine surface morphology with grain size 60nm≤dα-Fe≤80nm and 100nm≤dNdFeB≤150nm.     

燃气不换向蓄热式熔铝炉

蓄热式熔铝炉是一项先进节能技术，但至今在铝行业普及率不高，主要是一次性投资较大，维修费用较高。新近开发的燃气不换向蓄热式烧嘴，设备投资少、系统简化、设备故障少，使用安全可靠。     

磷酸异戊酯萃取U,Np,Pu性能的研究

测定磷酸异戊酯（ＴｉＡＰ）对Ｕ（Ⅵ）、Ｎｐ（Ⅳ）、Ｎｐ（Ⅴ）、Ｎｐ（Ⅵ）、Ｐｕ（Ⅳ）和Ｐｕ（Ⅲ）的萃取性能及对Ｔｈ（代替Ｐｕ）的萃取容量。研究了二乙三胺五乙酸（ＤＴＰＡ）络合剂对上述核素形成配合物的条件。结果表明，在用ＴＢＰ和ＴｉＡＰ作萃取剂时，可用ＤＴＰＡ络合Ｎｐ（Ⅵ）、Ｐｕ（Ⅲ）．从而改善乏燃料后处理中Ｕ产品对Ｎｐ、Ｐｕ和Ｐｕ产品对Ｎｐ的去污。     

仿真系统互操作性研究

如何提升系统的互操作性是当前仿真领域需要着力解决的问题,而理解互操作问题产生的根源则是提升互操作性的前提。从互操作性的概念分析人手,剖析了仿真系统互操作问题产生的原因,将之概括为组织、抽象和实现三个层面,并提出了相应的解决框架。框架通过建立概念模型库和平台无关模型库解决抽象层面的问题,利用模型实现的自动化和服务化解决实现层面的问题,可以作为领域内解决互操作问题的借鉴。最后提出了使用对比法和测试法评估系统互操作性的思路。