3,3-二甲基-N-(2-甲基丙烯酰氧乙基)-6′-硝基螺吲哚啉苯并吡喃的合成研究

以 2 ,3 ,3 三甲基 3 氢吲哚为原料合成了标题化合物 ,重要中间体和目标产物的结构经元素分析、红外光谱和核磁共振氢谱进行确证。     

肠溶型药物包衣用丙烯酸树脂的制备工艺

采用乳液聚合法制备肠溶型药物包衣用丙烯酸树脂,采用甲基丙烯酸与甲基丙烯酸甲酯作为共聚单体、过硫酸钾作为引发剂、十二烷基硫酸钠及OP-10复配作为乳化剂、苯乙烯的二聚体作为分子量调节剂、碳酸氢钠作为pH值调节剂,考察了乳化剂配比及用量、引发剂及分子量调节剂的用量、反应温度、加料方式、相比等因素的影响,最终确定了实验制备药物包衣用丙烯酸树脂的最佳条件。利用乌氏粘度计测定其相对分子量,并作了红外光谱测试,结果表明,乳液符合国家药典要求。该制备过程避免了有机溶剂的使用,有明显的经济和环保效益。     

强碱树脂在木糖应用中存在的问题及解决方法

木糖是一种在化工、食品等领域有着广泛用途的五碳糖,工业生产是用稀强酸将玉米芯中含有的大量多缩戊糖分解为单个的木糖分子,然后通过离子交换除盐、脱色,精制提取,但在强碱离子交换柱中,木糖分子容易被部分催化异构转化为阿拉伯糖,使得木糖纯度下降,结晶困难。考察了强碱树脂再生浓度、淋洗终点pH值、交换温度以及流速对木糖分子异构的影响,得出最佳的交换工艺条件:再生剂浓度为2%、淋洗终点pH值为7.5、交换温度20℃,流速为1BV/h。     

Formation of bed agglomeration in a fluidized multi-waste incinerator

A case study was carried out to investigate the bed agglomeration observed in a fluidized bed incinerator when burning blends of three wastes (carbon soot, biosludge and fuel oil). Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests. Several elements (V, Al, S, Na, Fe, Ni, P, and Cl), which normally are associated with the formation of low melting point compounds, were found in the waste blends at high content levels. The clinker bridges were identified to be associated with Al, Fe, V, K, Na, S, Ni, and Si elements.The effects of temperature and blending ratio were investigated in a muffle furnace. Carbon soot is believed to be more susceptible to the clinker formation than the other two fuels. Thermodynamic multi-phase multi-component equilibrium calculations predict that the main low melting point species could be Al₂(SO₄)₃, Fe₂(SO₄)₃, Na₂SO₄, NaCl, Na₂SiO₃ and V₂O₅. This information is useful to understand the chemistry of clinker formation. Also, it helps to develop methods for the control and possible elimination of the agglomeration problem for the design fuels.     

离子膜电解槽的腐蚀情况浅析

介绍了离子膜电解槽在生产运行过程中的腐蚀现象，讨论了产生腐蚀的原因。     

莫来石纤维多孔陶瓷的制备与性能

对纤维多孔陶瓷的制备及性能进行了研究。在制备纤维多孔陶瓷时,采用酸性磷酸铝A23(P/Al原子比为2 3)作粘结剂,所制备的多孔陶瓷在各方面都具有优良的性能。如导热系数λ(22℃)为0.0529W/m.℃、热膨胀系数α为4.75×10-6/℃、孔隙率为96.22%、容重为0.1142 g/cm3等。在环保、节能领域具有广泛的应用前景和重要的社会及经济意义。     

Effect of Acceptor and Donor Dopants on the Dielectric and Tunable Properties of Barium Strontium Titanate

The effects of different concentrations of Mn²⁺, Mg²⁺, Al³⁺, Fe³⁺, La³⁺, and Nb⁵⁺ on the dielectric and tunable properties of Ba_0.6Sr_0.4TiO₃ ceramics were investigated. It was found that doping in small amounts with acceptor ions such as Mg²⁺, Fe³⁺, and Al³⁺ could meliorate the dielectric properties clearly. Decrease of dielectric loss was attributed to the formation of compensating defects originating from acceptor substitution. It was concluded that the tunability was linked to both the dielectric constant and the grain size. A higher figure of merit was obtained by doping the ceramics with smaller ions of Al and Fe, compared to Ti.     

纳米碳酸钙的表面活化改性研究

本文主要介绍通过加入特定的表面改性剂,制得了表面改性的活性碳酸钙.并对活化过程中的一系列影响因素,如活化温度、活化时间、碳酸钙悬浊液浓度、表面改性剂用量进行了研究.     

新一代喷涂聚脲路面标线涂料

简述了国内路标漆的发展概况,介绍了聚天冬氨酸酯聚脲路标漆的原理、配方及应用性能。针对目前国内各种路标漆的优缺点,将聚天冬氨酸酯聚脲路标漆与它们进行比较,发现聚天冬氨酸酯聚脲路标漆具有快干、耐磨、反光效果好、施工速度快、重涂性好等优点,特别适用于路面标线涂料的应用。