野外观测系统的检验与校正

在地震资料处理中常常发现野外观测系统不准,其后果极为严重。为了避免重复施工,改善处理效果,笔者在IBM3081系统上编制了利用初至波对野外观测系统进行检验和校正的程序。文中介绍了两种校正方法:其一是只作炮检距校正。根据工区的小折射、井口时间、反射记录等资料提供一条或几条比较准确的初至时距曲线,作为标准曲线,然后将从实际共炮点道集中拾取的初至曲线与标准初至时距曲线相比较,确定出实际初至曲线所对应的炮检距,并对各个地震道的空间属性进行修改。对某三维工区的处理结果表明,该方法的效果良好。其二是先用迭代方法加误差约束条件计算炮点和检波点的坐标,然后计算炮检距,再进行校正。这种校正处理的效果也是明显的。但实验表明,对于观测系统误差较大的数据,不宜作坐标计算,只作炮检距校正尚可完成部分校正。处理中要根据数据的性质选取校正方法。     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

前馈和反馈相结合的控制策略在宝钢线材厂控冷轧线上的应用实践

在详细分析料坯在水箱内冷却热过程特点的基础上，提出了前馈和反馈相结合的水流量优化控制策略，并将该策略应用于宝钢线材厂控冷轧线上。实际运行结果表明：该策略能够合理地控制水箱水流量，从而保证了线材水箱出口处的温度满足工艺要求，大大提高了线材成品的质量。所做工作对国内同类企业有重要的意义。     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

奥氏体耐热钢21-4N碳化物析出行为研究

通过对奥氏体耐热钢21-4N碳化物析出行为的研究,探讨了对性能的影响,提出了改善其综合性能的措施和方法.     

Densitometry determination of dioxins using gold nanoparticlemodified dioxin response element probes

This study aims to develop a rapid and sensitive densitometry bioassay of dioxins. It is known that dioxin ligand can bind heterodimeric aryl hydrocarbon receptor (AhR) and trigger the formation of the complex of dioxin-AhR, AhR nuclear translocator (Arnt), and dioxin-responsive element (DRE). We have established a rapid and sensitive method using nanoparticle-modified DRE probes based on dioxin-dependent binding of DRE to AhR complex. Dioxins can trigger the binding of nanoparticle-modified DRE probe to AhR complex. The nanoparticle-modified DRE probes in the dioxin-AhR-Arnt-DRE complexes immobilized on the microplates were detected by measuring optical density after silver enhancement. Results showed that as little as 0.01 pM of TCDD could be detected. Dioxins could be quantified accurately with the linear range from 1 nM to 0.01 pM. The coefficient of variation was 5≈8% in this bioassay. The optical density of nanoparticle-based silver enhancement was produced in a dose- and time- dependent manner. The dioxin concentrations in fly ash samples determined by this bioassay were comparable with that by the standard HRGC/HRMS. Thus this bioassay is a sensitive and convenient cell-free bioassay of dioxin that is suitable for screening of dioxins in environmental or food matrices.     

齐莱姆水电站机组制造分包的合理性分析

葛洲坝集团有机电建设有限公司在齐莱姆水电站机电标的投标过程中，通过对各方向情况的了解和分析，同捷克斯可达公司就机组制造签定了分包协议，达到了增投标竞争力，确保履约顺利，转移和消除风全的目的。     

楔块体积成形模的应用

本文介绍了几种典型楔块体积成形模的工作原理,以及它们在模具工业上的应用。     

现代模具技术及其进展

论述了现代模具种类和学科特点、模具工业特点、模具领域新技术、模具CAD/CAM集成化技术的发展及展望。     

填充料细度对水工沥青混凝土性能的影响

近年来沥青混凝土作为防渗材料，在我国水工建筑中得到了广泛应用。与道路工程的沥青混凝土不同的是，水工沥青混凝土具有良好的粘弹性及抗渗性。目前，国家规范对填充料的细度尚无明确规定，通过调整沥青混凝土的填充料细工，对沥青混凝土的各项性能进行了系统的试验和分析，研究表明：适宜的填充料细度及掺量，能有效地改善沥青混凝土性能，提高其抗渗性。