轧制力传感器模态与瞬态仿真分析

为满足轧机振动测试的需求,对自行设计的小型轧机的轧制力传感器进行模态和瞬态仿真分析.将轧制力传感器的分析简化为对敏感元件的分析,建立仿真分析的模型,为接近轧机的实际工作受力情况,模态分析施加定载荷,而瞬态分析施加随时间变化的载荷.仿真结果表明,轧制力传感器的各阶振动频率均远高于轧机设备的固有频率,轧制力传感器的结构不会与轧机产生共振;敏感元件关键点的位移响应与轧制力函数载荷的变化基本一致,均没有激振现象的发生,说明敏感元件的设计符合轧机振动测试的要求.     

A brief review on α-zirconium phosphate intercalation compounds and nano-composites

The layer structured zirconium phosphate(Zr P) can be intercalated with atoms, molecules, small organic groups and even polymers. The structures and properties of the Zr P intercalation compounds can be deliberately tuned, leading to promising potential applications in many fields. This article provides a brief review on the experimental results of the Zr P intercalation compounds, with the focus on the polymer/a-zirconium phosphate (α-Zr P) nano-composites. The computer simulations of the Zr P intercalation compounds at the atomic level play a significant role in designing and understanding the properties of Zr P, and in the promotion of the applications of compounds.     

一维炉系统的测试实验

一维炉是一种研究煤的热解燃烧和结渣等方面的实验系统,可用于模拟电厂煤粉的燃烧特性。以元宝山褐煤为燃料,介绍了一维炉的结构和功能,并对系统的可靠性进行了验证,利用烟气分析仪及热重分析仪对燃烧后的尾部烟气及灰渣进行了分析测定。结果表明:尾部烟气含氧量与灰渣可燃部分剩余量均在理论计算值的误差允许范围内,说明一维炉密封良好,系统内各部分正常运行,对维炉的调试和研究具有一定的参考意义。     

层间接触状态和横向力大小对车辙贡献率的影响

车辙贡献率是反映沥青路面各结构层车辙病害程度的一个主要参数,可用于指导沥青路面的设计和施工.利用三维有限元计算软件建立三维有限元模型用于理论分析,将有限元计算结果与理论解进行对比,验证了该三维有限元模型的可靠性.采用实测的轮胎接地压力,考虑不同层间接触状态和横向力大小,结合有限元计算的数据,分析了沥青路面结构层的车辙贡献率.结果表明:在层间完全连续状态下,横向力大小的选取不能简单地选取最大垂直轮胎接地压力的一定比例,而是要根据所研究的具体情况具体分析.在对沥青路面车辙贡献率的研究中,可以忽略层间接触状态,即假定层间完全连续.     

消泡剂在发酵工业中的应用

泡沫问题是发酵工业中一个棘手的问题,几乎所用的液体深层发酵都会用到天然或者化学消泡剂。在过去的发酵过程中,泡沫控制一般是依靠经验,关于消泡剂的系统知识较少。本文综述了发酵工业中消泡剂的种类和作用机制,以及消泡剂的应用进展。     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.     

含氮、磷有机配体对(CdSe)_2量子点结构和电子性质的影响

使用密度泛函理论方法研究了量子点(CdSe)2与配体L(L=PH3、PH2Me、PHMe2、PMe3、NH3、NH2Me、NHMe2、NMe3)之间的相互作用及其产物的结构和性质。配体中的P或N原子与Cd原子上分别形成较强的Cd—P和Cd—N配位键,从而影响(CdSe)2的结构和电子性质。配体作用下,(CdSe)2的几何结构、电荷分布、轨道能级、吸收光谱等均发生变化,但2类配体的影响,尤其是甲基数目的影响,存在较大差异。     

磁场中双量子位Heisenberg模型的纠缠与量子相变

以双量子位Heisenberg模型为例,讨论了磁场方向对纠缠的影响。结果表明：一定温度下,保持磁场的大小不变,仅改变其方向,不仅能获得最大纠缠,还产生了量子相变。     

铜离子印迹改性壳聚糖海绵的制备及应用研究

以醋酸铜为模板,甲醇、氯仿为溶剂,2-乙烯吡啶、丙烯酰胺为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备铜离子印迹聚合物;然后掺入到壳聚糖海绵的制备中,使壳聚糖海绵对铜离子的吸附率由27．1％提高到72．3％。制备的铜离子印迹改性壳聚糖海绵需要2d达到吸附平衡,吸附-解吸5次后,性能稳定。