Debottlenecking procedure of effluent thermal treatment system

In this study pinch technology has been improved for wastewater temperature reduction. Having considered design grouping rules on the basis of pinch technology, a new debottlenecking procedure for thermal treatment of the wastewater network, has been introduced. In the presented procedure, better thermal treatment of effluent network using the new method can be used to avoid investment in new cooling tower capacity and to improve the performance of the tower in a systematic way. Related coding in Visual Sudio.Net 2003, C++, has been developed for the illustrative example to get optimal values in the cooling water design method computations.     

Ultrafiltered milk reduces bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide-producing culture

The objectives were to reduce bitterness in reduced-fat Cheddar cheese made with an exopolysaccharide (EPS)-producing culture and study relationships among ultra-filtration (UF), residual chymosin activity (RCA), and cheese bitterness. In previous studies, EPS-producing cultures improved the textural, melting, and viscoelastic properties of reduced-fat Cheddar cheese. However, the EPS-positive cheese developed bitterness after 2 to 3 mo of ripening due to increased RCA. We hypothesized that the reduced amount of chymosin needed to coagulate UF milk might result in reduced RCA and bitterness in cheese. Reduced-fat Cheddar cheeses were manufactured with EPS-producing and nonproducing cultures using skim milk or UF milk (1.2×) adjusted to a casein:fat ratio of 1.35. The EPS-producing culture increased moisture and RCA in reduced-fat Cheddar cheese. Lower RCA was found in cheese made from UF milk compared with that in cheese made from control milk. Ultrafiltration at a low concentration rate (1.2×) produced EPS-positive, reduced-fat cheese with similar RCA to that in the EPS-negative cheese. Slower proteolysis was observed in UF cheeses compared with non-UF cheeses. Panelists reported that UF EPS-positive cheese was less bitter than EPS-positive cheese made from control milk. This study showed that UF at a low concentration factor (1.2×) could successfully reduce bitterness in cheese containing a high moisture level. Because this technology reduced the RCA level (per g of protein) to a level similar to that in the control cheeses, the contribution of chymosin to cheese proteolysis would be similar in both cheeses.     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Micellar Growth in Cetylpyridinium Chloride/Alcohol System: Role of Long Chain Alcohol,Electrolyte and Surfactant Head Group

The microstructural transition of aqueous 0.1 M cetylpyridinium chloride (CPC) in the combined presence of salt KBr and long chain alcohol (C₉OH-C₁₂OH) has been studied as a function of alcohol concentration, electrolyte concentration and temperature. The viscosity of the CPC/KBr micellar system showed a peaked behavior with alcohol concentration (C ₀), due to alcohol induced structural transition, which was confirmed by dynamic light scattering (DLS) and rheological analysis. Besides C ₀, the chain length of alcohol (n) was found to show a remarkable effect on the micellization behavior of CPC/KBr system. It was observed that the ability of alcohol to induce micelle growth diminishes with n, which was well supported by viscosity, rheology and DLS measurements. To examine the effect of the electrolyte on the micellar growth, the salt concentration was varied from 0.05 to 0.15 M and it was observed that with increase in [KBr], the peak position shifts towards lower C ₀. The effect of temperature on the micellar system showed interesting phase behavior for CPC/KBr/Decanol. The system exhibited a closed solubility loop with an upper critical solution temperature (UCST) > the lower critical solution temperature (LCST), reminiscence of nicotine-water system. The role of surfactant head group on the structural evolution was revealed by comparing the present results with our previous report for similar micellar system, CTAB/KBr/long chain alcohol.     

Fracture behaviour of polyethylene naphthalate (PEN)

Fracture toughness of a semi-crystalline polyethylene naphthalate (PEN) film of thicknesses 0.050, 0.075 and 0.125 mm was measured as a function of temperature and loading rate using both double edge notched tension (DENT) and single edge notched tension (SENT) specimens. The specific essential work of fracture (EWF) and the multi-specimen J-integral methods were used to evaluate fracture toughness. The variation of the specific total work of fracture (w_f) with ligament length (L) was linear for ligament lengths between 5 and 15 mm. Within this range, w_f versus L was independent of thickness at all temperatures but was dependent on both temperature and loading rate. The specific EWF (w_e) was found to be independent of thickness and loading rate but showed three regions of varying temperature dependence. Between 23 and 80°C (region I) w_e was essentially independent of temperature but increased with temperature between 80 and 120°C (region II) and decreased with temperature thereafter (region III). At glass transition temperature (i.e. 120°C), w_e reached a maximum value of 75 kJ/m². The specific non-EWF (βw_p) increased with both loading rate and temperature. The greatest change in βw_p value with respect to temperature was obtained in region II.The plot of J-integral versus crack extension (Δa) was independent of thickness but was dependent upon temperature. w_e was found to be equivalent to both J_0.2 and J₀.     

Resorcinol formaldehyde xerogels modified with mercapto functional groups as mercury adsorbent

Resorcinol formaldehyde xerogels are modified by mercaptopropyl‐trimethoxysilane during the sol–gel process used to produce the xerogel. The chemical modification is confirmed by Fourier‐transform infrared spectroscopy. The xerogel is then used to adsorb mercury ions from aqueous solutions. The effects of the molar ratios of the precursors as well as the catalyst and the modifier are studied on the textural properties of the xerogel and the adsorption efficiency. It is shown that the chemical modification of the resorcinol formaldehyde xerogels creates the chemical sites on the structure of the xerogel to adsorb more mercury ions and increase the adsorption efficiency. At the same time, chemical modification decreases the xerogel surface area which results in a reduction of the mercury adsorption. Therefore, there exists an optimum value for the chemical modification of the xerogel to achieve the highest adsorption efficiency. Adsorption kinetics as well as equilibrium isotherm of xerogels were examined using pseudo‐first‐ and second‐order kinetic equations, and Freundlich and Langmuir isotherm models. The adsorption kinetics was found to follow the pseudo‐second‐order kinetic equations. The experimental data was also fitted into the Longmuir model more precisely comparing the Freundlich model. Finally, a series of mercury adsorption–desorption tests proved that the optimized mercapto‐modified resorcinol formaldehyde xerogel was an efficient reusable adsorbent for mercury ions. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42543.     

Effective modeling and optimization of PVDF–PTFE electrospinning parameters and membrane distillation process by response surface methodology

Ploy(vinylidene fluoride)–polytetrafluoroethylene nanofibrous membrane fabrication and direct contact membrane distillation (DCMD) process were simulated and optimized by response surface methodology (RSM). Analysis of variance was applied to develop and verify the models that predict the objectives. The three-dimensional response surfaces of different objectives were obtained. Results showed that the membrane with thickness of 70.7 μm, contact angle of 146.2°, and liquid entry pressure of 53.5 kPa was obtained within investigated experimental range under the optimum electrospinning conditions. Rejection rate of 99.99% and the permeate flux of 67.5 kg m⁻² h⁻¹ were gained under the optimum membrane distillation (MD) process parameters. The actual and predicted values show good consistency verifying the accuracy of the models. In addition, an overall investigation of the influence of heat-press temperature on the morphological and mechanical properties of electrospun membrane was carried out. Results indicated that electrospinning process and MD performance can be enhanced after the corresponding variables were optimized by RSM. This study provides a scientific way to optimize the electrospinning and DCMD parameters. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47125.     

TiO2 nanofibers doped with rare earth elements and their photocatalytic activity

In the present study rare earth doped (Ln³⁺–TiO₂, Ln = La, Ce and Nd) TiO₂ nanofibers were prepared by the sol–gel electrospinning method and characterized by XRD, SEM, EDX, TEM, and UV-DRS. The photocatalytic activity of the samples was evaluated by Rhodamine 6G (R6G) dye degradation under UV light irradiation. XRD analysis showed that all the synthesized pure and doped titania nanofibers contain pure anatase phase at 500 °C but at 700 °C it shows both anatase and rutile phase. XRD result also shows that Ln³⁺-doped titania probably inhibits the phase transformation. The diameter of nanofibers for all samples ranges from 200 to 700 nm. It was also observed that the presence of rare-earth oxides in the host TiO₂ could decrease the band gap and accelerate the separation of photogenerated electron–hole pairs, which eventually led to higher photocatalytic activity. To sum up, our study demonstrates that Ln³⁺-doped TiO₂ samples exhibit higher photocatalytic activity than pure TiO₂ whereas Nd³⁺-doped TiO₂ catalyst showed the highest photocatalytic activity among the rare earth doped samples.     

Investigation of synergistic effect of nano sized Ag/TiO2 particles on antibacterial,physical and mechanical properties of UV-curable clear coatings by experimental design

The synergistic effect of nano titanium dioxide (10 and 30 nm) and nano silver (10 nm) as antibacterial agents were investigated on UV curable clear coating. Antibacterial and physical–mechanical properties of coating were optimized using experimental design in response surface method. Twenty different samples of nano Ag and nano TiO₂ were prepared in this method. Antibacterial properties on Gram-negative bacteria (Escherichia coli) were investigated. The results revealed that using equal amounts of two sizes of nano TiO₂ promote the antibacterial activity of nano Ag. So, the coating shows strong activity against E. coli. Physical–mechanical properties such as surface hardness, abrasion resistance, scratch resistance and gloss of the coating were evaluated. The results depicted appropriate physical–mechanical properties. Also, scanning electron microscope (SEM), atomic force microscope (AFM) and Fourier transform infrared (FT-IR) spectroscopy were used to study the effect of nano particles on coating properties.