The giant dispersion of critical currents in a superconductor with fractal clusters of a normal phase

The influence of fractal clusters of a normal phase on the dynamics of a magnetic flux trapped in a percolation superconductor is considered. The critical depinning current distribution and the current-voltage characteristics of fractal superconducting structures in the resistive state are determined for an arbitrary fractal dimension of the cluster boundaries. The interval of fractal dimensions is found in which the dispersion of critical currents exhibits unlimited growth. It is established that the fractality of clusters favors a decrease of the electric field arising during the magnetic flux motion, thus increasing the critical current value. The region featuring the giant dispersion of critical currents can be expected to provide for the maximum current-carrying capacity of a superconductor.     

预应力钢-混凝土组合梁的应用与研究

回顾了预应力钢 混凝土组合梁国内外应用与研究历史 ,分析了现有规范及理论的不足 ,并指出了有待解决的问题。     

Comparative Assessment of the Effect of Chemical and Radiation Factors on Workers and the General Public Resulting from the Salvaging of Nuclear-Powered Submarines

The results of observations performed over many years are used to make an assessment of the degree to which the concentration of chemical and radioactive substances escaping into the environment during salvaging of nuclear-powered submarines exceeds the admissable norms for workers at the main ship-repair facilities in Russia and for the general public in the surrounding territories. It is shown that the chemical substances are a determining factor in environmental contamination. Their content in the atmosphere and sea water exceeds the admissable norms near sources, on the territory of the enterprises, and (for individual indicators) at populated points. Under these conditions, the concentration of technogenic radionuclides does not exceed the admissable norms and its damaging effect on man is hundreds and thousands of times less than that of chemicals.     

空心微珠改性硬质聚氯乙烯复合材料的应用研究

经过改性的超细空心微珠可以作为填料加入到硬质聚氯乙烯（PVC－U）树脂中，同时改善PVC树脂的流变性、冲击性能和刚性等性能。研究结果表明，超细空心微珠加入到硬质PVC管材中，可以明显改善PVC硬管的加工流动性能，显著缩短塑化时间，降低最大扭矩。而超细空民微珠加入到硬质PVC板材时，可以提高PVC硬板的冲击性能，减小制品的收缩率，赋予PVC硬板优异的耐腐蚀性能，且产品的各项性能均符合PVC板材国家标准GB／T4454－96。     

低乙烯含量抗冲聚丙烯的结构表征

采用二甲苯为溶剂，将不同乙烯含量（５％￣１５％质量）的抗冲聚丙烯用特定程序进行分级，将各样品分为室温下可溶于甲苯和不可溶于甲苯的两部分。使用＾１３Ｃ－ＮＭＲ方法和ＦＴ－ＩＲ方法对各组分进行表征，明确了乙烯链段在聚丙烯链上的分布，并在此基础上提出了产生这种链结构的聚合工艺的特点。     

Lipase‐catalyzed dynamic kinetic resolution of (R,S)‐fenoprofen thioester in isooctane

A lipase‐catalyzed enantioselective hydrolysis process under in situ racemization of the remaining (R)‐thioetser substrate with trioctylamine as the catalyst was developed for the production of (S)‐fenoprofen from (R,S)‐fenoprofen 2,2,2‐trifluoroethyl thioester in isooctane. Detailed investigations of trioctylamine concentration on the enzyme activation and the kinetic behavior of the thioester in racemization and enzymatic reactions were conducted, in which good agreement between the experimental data and theoretical results was observed. © 2002 Society of Chemical Industry     

Radiological hazard of long-lived spallation products in accelerator-driven system

The present paper focuses on analysis of radiological hazard of spallation products that appears to be an important factor that might affect the choice of beam/target performance in designing the accelerator-driven systems. The analysis is done in terms of toxicity expressed in units of Annual Limit on Intake (ALI). It reveals the significant contribution of alpha emitting rare earths (¹⁴⁶Sm, ¹⁴⁸Gd, ¹⁵⁰Gd, ¹⁵⁴Dy) into overall toxicity of spallation targets.     

Stabilization of Time-Varying Linear Discrete Interval-Coefficient Control Systems by Phase State Observations

Stabilization of the trajectories of a linear discrete system closed by dynamic feedback under interval uncertainty of the equations of motion and observation is studied. Sufficient conditions of stabilizability are formulated. Results of numerical experiments are given.     

Special Features of Fracture of Steels from Partially-Alloyed Powders

Special features of fracture of structural steels 45N2D2M and 45N4D2M manufactured by pressing with subsequent sintering from partially alloyed iron powders are studied. Impact bending tests of specimens with different levels of retained porosity show two kinds of fracture, i.e., intraparticle cleavage and interparticle dimple fracture. In addition, the surfaces of the “initial” pores come out to the fracture surface. Other conditions being equal, growth in porosity decreases the proportion of the brittle component of fracture and decreases the critical brittle point.