The quantum dynamic capacity formula of a quantum channel

The dynamic capacity theorem characterizes the reliable communication rates of a quantum channel when combined with the noiseless resources of classical communication, quantum communication, and entanglement. In prior work, we proved the converse part of this theorem by making contact with many previous results in the quantum Shannon theory literature. In this work, we prove the theorem with an ??ab initio?? approach, using only the most basic tools in the quantum information theorist??s toolkit: the Alicki-Fannes?? inequality, the chain rule for quantum mutual information, elementary properties of quantum entropy, and the quantum data processing inequality. The result is a simplified proof of the theorem that should be more accessible to those unfamiliar with the quantum Shannon theory literature. We also demonstrate that the ??quantum dynamic capacity formula?? characterizes the Pareto optimal trade-off surface for the full dynamic capacity region. Additivity of this formula reduces the computation of the trade-off surface to a tractable, textbook problem in Pareto trade-off analysis, and we prove that its additivity holds for the quantum Hadamard channels and the quantum erasure channel. We then determine exact expressions for and plot the dynamic capacity region of the quantum dephasing channel, an example from the Hadamard class, and the quantum erasure channel.     

Epigallocatechin-3-Gallate-Loaded Liposomes Favor Anti-Inflammation of Microglia Cells and Promote Neuroprotection

Microglia-mediated neuroinflammation is recognized to mainly contribute to the progression of neurodegenerative diseases. Epigallocatechin-3-gallate (EGCG), known as a natural antioxidant in green tea, can inhibit microglia-mediated inflammation and protect neurons but has disadvantages such as high instability and low bioavailability. We developed an EGCG liposomal formulation to improve its bioavailability and evaluated the neuroprotective activity in in vitro and in vivo neuroinflammation models. EGCG-loaded liposomes have been prepared from phosphatidylcholine (PC) or phosphatidylserine (PS) coated with or without vitamin E (VE) by hydration and membrane extrusion method. The anti-inflammatory effect has been evaluated against lipopolysaccharide (LPS)-induced BV-2 microglial cells activation and the inflammation in the substantia nigra of Sprague Dawley rats. In the cellular inflammation model, murine BV-2 microglial cells changed their morphology from normal spheroid to activated spindle shape after 24 h of induction of LPS. In the in vitro free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, EGCG scavenged 80% of DPPH within 3 min. EGCG-loaded liposomes could be phagocytized by BV-2 cells after 1 h of cell culture from cell uptake experiments. EGCG-loaded liposomes improved the production of BV-2 microglia-derived nitric oxide and TNF-α following LPS. In the in vivo Parkinsonian syndrome rat model, simultaneous intra-nigral injection of EGCG-loaded liposomes attenuated LPS-induced pro-inflammatory cytokines and restored motor impairment. We demonstrated that EGCG-loaded liposomes exert a neuroprotective effect by modulating microglia activation. EGCG extracted from green tea and loaded liposomes could be a valuable candidate for disease-modifying therapy for Parkinson’s disease (PD).     

Reverse osmosis separations of polyethylene glycols in dilute aqueous solutions using porous cellulose acetate membranes

Reverse osmosis separations of eight polyethylene glycol (PEG) solutes in the average molecular weight range of 200 to 6750 in single-solute dilute aqueous solutions have been studied using porous cellulose acetate membranes at the operating pressures of 50, 75, and 100 psig. Diffusivity data for the above PEG solutes have also been obtained from experimental data on intrinsic viscosities. From an analysis of all experimental data, numerical values for the parameters representing the polar (?ΔΔG/RT), steric (δ^*ΣE_s), and nonpolar (ω^*Σs^*) forces governing reverse osmosis separations of PEG solutes have been generated. These numerical values are useful for precise characterization of cellulose acetate membranes for whose specifications sodium chloride is not the appropriate reference solute because of its low or practically negligible separation under reverse osmosis operating conditions. This work also illustrates that solute separation in reverse osmosis can predictably increase or decrease with increase in operating pressure depending on experimental conditions.     

Optimal process conditions of shrinkage and warpage of thin‐wall parts

Optimal process conditions of thin‐wall injection molding of a cellular phone cover were investigated with the consideration of interaction effects between process parameters. L₂₇ experimental tests based on Taguchi's method were performed, and then Cyclone Scanner, PolyCAD and PolyWorks were used to measure the shrinkage and warpage of the thin‐wall injected parts to determine the optimal process conditions. Based on the results of the analysis of variables and the F‐test, interaction effects for each observed factor were determined. The results indicated that the packing pressure was the most important process parameter affecting the shrinkage and warpage of the thin‐wall part. The optimal process conditions were different for the shrinkage and the warpage. This was because during the injection process, the mechanisms affecting shrinkage or warpage were different. Compared with the results obtained with simplified thin‐wall parts in the literature, it was found that the geometry of a real commercial part did affect the optimal process conditions and the order of influence of process parameters. The optimal process conditions determined by Taguchi's method for reducing the shrinkage and warpage were verified experimentally in this work. Polym. Eng. Sci. 44:917–928, 2004. © 2004 Society of Plastics Engineers.     

Influence of Potassium on Preparation and Performance of PTC Resistors

Different amounts of K₂CO₃ were added to (Ba,Sr)TiO₃-based PTCR (positive temperature coefficient of resistance) ceramics to investigate their influence on the microstructural and electrical properties. Experimental results showed that the incorporation of K acted as an A-site acceptor-type dopant. In addition to enhancing discontinuous grain growth, the increase of K₂CO₃ was found to raise the room-temperature resistivity which was dominated by grain-boundary resistance rather than grain resistance. By adjusting to a suitable amount of donor dopant, the inherent contamination of K in raw material can be compensated to achieve a high-quality PTC resistor.     

Solute diffusion through degradable semicrystalline polyethylene glycol/poly(l-lactide) copolymers

Summary The diffusion of C.I. direct orange 34(MW=299) and benzoic acid(MW=122) through degraded semicrystalline polyethylene glycol(PEG)/poly(L-lactide)(PLLA) block copolymers with various PEG contents and PEG segment lengths at 37°C was studied by UV-visible spectroscopy, differential scanning calorimetry(DSC), wide angle X-ray diffractometer (WAXS) and scanning electron microscopy(SEM). The influences of the PEG contents, PEG segment lengths and hydrolytic degradation of PEG/PLLA copolymers on the solute diffusion coefficient and mode for transport were investigated. It is concluded that the diffusion rate increases with the increase of PEG contents and PEG segment lengths in PEG/PLLA copolymers. This is understandable that the increase of PEG content and PEG segment length both make the degree of crystallinity decrease. The steady state of mass flux could not be reached at the diffusion times up to 1000 h, because the copolymers underwent hydrolysis reaction during this period. Furthermore, it is understood that the characteristic time of diffusion as defined by the square of film thickness at an instant of time over the diffusion coefficient of solute through polymer decreases with the increasing diffusion time.     

Cure monitoring via different techniques: Isothermal cure of an epoxy-novolac molding compound

The isothermal cure of an epoxy-novolac molding compound was studied by means of Fourier-transform infrared spectroscopy (FTIR) and dielectrometry (DE). Results obtained were compared with previous differential scanning calorimetric (DSC) observations. The behavior of epoxide conversion (_FTIR) measured via FTIR was found similar to (but not exactly coinciding with) the extent of cure (_DSC) determined previously by means of DSC. As for the DE analysis, directly measurable properties such as permittivity () and loss factor () varied in a complicated manner during the course of cure, showing strong dependence on both temperature and frequency. Other dielectric parameters (such as ionic conductivity, relaxed permittivity, and characteristic relaxation time) previously suggested in the literature as suitable for cure monitoring purposes were found difficult to determine within the limited frequency range (10⁰ to 10⁴ Hz) here. With some arbitrariness, the relative drop in log (at 100 Hz) was taken as an index (_DE) for the extent of cure. It was observed that _DE behaves in a manner similar to _FTIR and _DSC Comments on the application of these three techniques in the characterization of thermosetting systems were given.     

Synthesis and kinetic studies of UV‐curable urethane‐acrylates

The UV‐curable urethane‐acrylates based on 2‐hydroxyethyl methacrylate (HEMA)‐terminated polyurethane (PU) for lithographic and coating applications are investigated in this study. Series of PU prepolymers were made from 4,4‐diphenyl methane diisocyanate (MDI), poly(propylene oxide) glycol (PPG 400), poly(butylene adipate)glycol (PBA 500), or poly(tetramethylene oxide) glycol (PTMO 1000) and are terminated with HEMA. The 2,2‐azobisisobutyronitrile (AIBN) was used as a UV‐initiator under air atmosphere. The curing kinetics of HEMA‐terminated PU film were studied. The curing analysis, using FTIR and reaction kinetics, indicate the reaction rate equation correlates well with the film thickness [T], initiator concentration [I], unreacted double bond concentration [C?C], and exposed energy [E] of the reaction system. The kinetic rate equation for the UV‐curable reaction can be written as © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3162–3166, 2004     

Morphology and characterization of conductive films based on polyaniline‐coated polystyrene latexes

The polyaniline (PANI)‐coated polystyrene (PS) latexes were synthesized, and the electrically conductive films were prepared thereafter. The weight ratio of PANI was 5%. Thermal analysis of the latices was performed using DSC and TGA. In this study, the electrically conductive films were prepared above the PS glass transition temperature (T_g). During the film formation, the effects of the annealing temperature and atmosphere (air or N₂) on the film resistance were investigated. In addition, the film morphology was observed utilizing scanning electron microscopy. The film resistance decreased in the initial heating stage due to the increasing temperature and the compaction of film. Then the film resistance increased with further annealing due to the aging of PANI. Typically, the film resistance was about 6000 Ω/sq, and the conductivity was 0.3 S/cm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5406–5413, 2006     

Surface modification and physical properties of various UHMWPE‐fiber‐reinforced modified epoxy composites

Two surface modification methods—plasma surface treatment and chemical agent treatment—were used to investigate their effects on the surface properties of ultrahigh‐molecular‐weight polyethylene (UHMWPE) fibers. In the analyses, performed using electron spectroscopy for chemical analysis, changes in weight, and scanning electron microscope observations, demonstrated that the two fiber‐surface‐modified composites formed between UHMWPE fiber and epoxy matrix exhibited improved interfacial adhesion and slight improvements in tensile strengths, but notable decreases in elongation, relative to those properties of the composites reinforced with the untreated UHMWPE fibers. In addition, three kinds of epoxy resins—neat DGEBA, polyurethane‐crosslinked DGEBA, and BHHBP‐DGEBA—were used as resin matrices to examine the tensile and elongation properties of their UHMWPE fiber‐reinforced composites. From stress/strain measurements and scanning electron microscope observations, the resin matrix improved the tensile strength apparently, but did not affect the elongation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 655–665, 2007