670 t/h锅炉燃烧系统改造

针对扬州发电有限公司200Mw机组4号炉(670t／h)长期存在锅炉灰渣可燃特含量偏高、锅炉效率偏低问题，在详细试验的基础上．对4号炉三次风燃烧系统进行了改造。改造后试验结果表明，4号炉在制粉系统运行条件下，锅炉效率提高2％以上。     

Comparison of a new algorithm with the supervised classifications

In this study, a new classification algorithm in which only the selected pixels have been attempted to be classified (selected pixels classification: SPC) has been introduced and compared with the well known supervised classification methods such as maximum likelihood, minimum distance, nearest neighbour and condensed nearest neighbour. To examine the algorithm, Landsat Thematic Mapper (TM) data have been used to classify the crop cover in the selected region. It is clearly demonstrated that the SPC method has the higher accuracy with comparable CPU times.     

Particle-based simulation of the interaction between fluid and knitwear

We present a particle-based method to simulate and visualize the interaction of knitwear with fluids. The knitwear is modeled using spring-mass systems and the fluid is modeled using the smoothed particle hydrodynamics method. Two-way coupling is achieved by considering surface tension, capillary, and interparticle forces between the fluid and knitwear. The simulation of fluid and knitwear particles is performed on the graphics processing unit. Photorealistic rendering of knitwear and fluid is achieved by using a hardware-accelerated rasterization-based rendering technique. Our method is able to simulate and visualize the macro- and microstructure of free-form knitwear and reflective and refractive characteristics of the fluid surface.     

Coherent precipitation in a high-temperature Cr–Ni–Al–Ti Alloy

Chromium alloys present a potential for development of new high-temperature materials. Precipitation characteristics of a Cr–5Ni–5Al–0.5Ti (at.%) alloy were investigated utilizing a series of heat treatments. XRD, SEM, and analytical TEM were used to characterize the microstructure. This study has shown that the small spherical B2-NiAl precipitates forming below 1345 °C are highly coherent and have a well-defined orientation relationship with the Cr-matrix. Also, some evidence has been presented for the formation of L2₁-Ni₂AlTi phase within the B2-NiAl phase.     

Multifractal characterization of unworn hydrogel contact lens surfaces

Purpose: The aim of this work was to estimate the multifractal spectra of 3D surface roughness for unworn hydrogel contact lenses (CL), obtained with atomic force microscopy (AFM) analysis. Materials and methods: Contact lenses made from vifilcon A (Focus® Monthly Toric Visitint® model, CIBA Vision Corp.) were investigated. CL surface roughness was studied by AFM in tapping‐mode™, in an aqueous environment, on square areas ranging from 1 to 4 μm². A detailed methodology for CL surface multifractal characterization, which may be applied for AFM data, was presented. Results: The CL surface roughness revealed multifractal geometry at various magnifications. The generalized dimension D_q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of CL surface geometry at nanometer scale. Conclusions: Multifractal analysis provides different yet complementary information to that offered by traditional surface statistical parameters. POLYM. ENG. SCI., 54:1066–1080, 2014. © 2013 Society of Plastics Engineers     

Effects of Mg-Coating and Boron Type on Electromechanical Properties of IMD MgB2/Fe Wires

Journal of Superconductivity and Novel Magnetism - In this study, mechanical and electrical characterization measurements were performed on non-bent and gradually bent IMD MgB2/Fe superconducting...     

Evolution of microstructure and properties of internal nitride dispersion strengthened alloy before nitriding

Internal nitride dispersion strengthened superalloy is a new type of high performance superalloy for combustion chamber. The background and development of this alloy were firstly introduced. And then the microstructure and properties of NS163 which is a typical internal nitride dispersion strengthened alloy were investigated. The results show that the microstructure of NS163 is simple in the temperature range of 900??1250??, which is composed of austenite matrix and MC carbide. The recrystallization behavior of the cold- rolled sheet under the test condition was studied systematically. It is found that the solid solution temperature of the finished product should be 1200??, and after solid solution at 1200??, the sheet has 5 grade average grain size, excellent cold workability and low tensile strength at high temperature. The above results can help to optimize the microstructure of NS163 alloy sheet before nitriding and provide a basis for the evaluation of the strengthening effect of the alloy after internal nitriding.