A novel de-rusting method with molten salt precleaning and laser cleaning for the recycling of steel parts

Clean Technologies and Environmental Policy - Steel parts are a kind of high recovery value product for which de-rusting is the primary step in the recycling process. Laser cleaning is a popular...     

Self-assembly synthesis of cactuslike Cu2O 3D nanoarchitectures via a low-temperature solution approach

Cu₂O nanocactuses were synthesized via a simple, low-temperature, and no time-consuming wet chemical route. The synthesized products were systematically studied by X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that the formation of Cu₂O nanocactuses was strongly depended on the addition of CTAB and NaOH. The structural evolution of the cactuslike Cu₂O was found to follow dissolution and recrystallization processes. It is noteworthy that the stepwise synthetic procedure was crucial to the growth of the final nanoarchitectures. UV–vis spectrum was also used to estimate the absorption and photodegradation ability of the nanocactuses.     

Modulating lateral strain in GaN-based epitaxial layers by patterning sapphire substrates with aligned carbon nanotube films

A novel carbon nanotube-patterned sapphire substrate (CPSS) has been utilized for the growth of GaN material and fabrication of a InGaN/GaN light emitting diode (LED) by metal-organic vapor phase epitaxy. Different lateral strain distributions and stress reductions were observed in a GaN thin film on CPSS compared with those on a conventional sapphire substrate. Nanoheteroepitaxy induced by small size nucleation islands of about 50 nm is ascribed to this significant strain modulation. The crystalline quality of the GaN thin film was also improved, as illustrated by X-ray diffraction. Performances of 1 mm × 1 mm LEDs on CPSS were also enhanced, with an operational power increase of 37.5% and higher saturation current.      

大型农机的发展与问题探讨

通过分析大型农机在农业生产实践中发展的必然性和面临的问题,阐述了大型农机在现代农业生产中的作用和发展建议.     

常熟华府世家箱形转换层结构设计

常熟华府世家工程是一栋高层建筑,由于在转换梁的布置中有多次梁抬墙的情况,采用整体性好的箱形转换结构。对箱形转换层及其上下若干楼层的受力进行了计算,根据计算结果对箱形转换层进行结构设计。计算结果表明,采用箱形转换层提高了结构的整体性和抗震性能,结构的变形满足规范要求。对箱形转换结构的设计和施工中要注意的问题进行了探讨。     

"二墙合一"中的地下连续墙接缝的防渗与止水施工

在地下连续墙兼作地下结构外墙的“二墙合一”工程中,为防地下连续墙接缝处的渗漏,采用三重管高压摆喷工艺和压密注浆进行防渗处理,取得了理想的效果。     

粮油中转储备库的加固改造设计

介绍了加固方案的选择、相关构件强度的计算、接点构造的处理等主要加固步骤。实践证明,此方案较经济、合理,且能最大程度地减少施工工作量。     

四川盆西平原区裸土扬尘中Pb、Cd化学形态的生物有效性

为探究四川盆西平原区裸土扬尘中Pb、Cd总质量分数与其生物有效性的规律,在构建的"阳离子型污染物土壤表层运移行为研究系统"内进行模拟起尘试验,对土壤样品进行Pb、Cd模拟污染试验,结果表明:试验条件下,四川盆西平原区裸土扬尘颗粒物中Pb、Cd的总质量分数随着粒径的减小而增大,其中Pb的化学形态以碳酸盐结合态为主(44....     

600MW空冷机组锅炉烟风道优化设计分析

针对600 MW空冷机组原烟风道占地面积大,材料用量多、造价高的问题,结合河北建投沙河发电有限公司2台600 MW超临界空冷机组工程中烟风道的设计,比较分析烟风道采用常规矩形道体和圆形道体的优劣,认为烟风道道体优化形状为圆形,介绍除尘器进口烟道、热一次风道、引风机进口烟道优化布置方案,并进行经济性分析。