On the Theory of Electrical Phenomena in Combustion of Heterogeneous Systems with Condensed Products

The effect of the electromotive force arising in combustion of heterogeneous systems with condensed products is explained. A convective mechanism of arising regions with different charge densities due to charge transfer by the gas filtered in the pores is formulated on the basis of the developed physical concepts, estimates, and analysis of experimental data. Key words: combustion, electron emission, filtration, electromotive force.     

Highly compact AC-AC converter achieving a high voltage transferratio

This paper reports a new, highly integrated modular design approach for pulsewidth-modulation AC-AC converters based on a modular phase-bank structure. Novel high-power 3-in-1 integrated bi-directional power modules (IBPM) rated at 1200-V AC and 150 A and the 3-to-1 phase bank circuits have been successfully developed, fabricated and tested. This enables the modularity design of the multiphase converter systems and reduces the critical parasitic inductance. A theoretical analysis of the IBPM's silicon utilization for this new breed of direct power converters has been outlined. A lab prototype at medium power level has been successfully designed, implemented, and tested with good results. A nearly 460-VRMS out voltage at a 1:0.955 voltage transfer ratio, which, perhaps, is the highest performance reported so far in the literature, has been achieved by the novel two-side modulation control system. The converter-fed AC motor system is able to operate over the 0-240 Hz range with inherent regenerative capability and four-quadrant operation. Potential industrial applications are also briefly highlighted in this paper     

Interaction Between a Drying Agent and Particles Dispersed by an Airstream Atomizer Inside a Drying Chamber

Results of an experimental study of the aerodynamics and spray density distribution of a liquid dispersed by an airstream atomizer inside a drying chamber. Velocity components of the drying agent and their radial distributions as a function of the distance from the spray plane are determined. Relationships for the distribution of dispersed liquid inside the drying chamber are derived. Interactions between the drying agent and the product in the drying chamber are analyzed.     

Adaptive control of diamond drilling of nonmetallic materials

The basic principles for selecting the work regimes for diamond drilling of nonmetallic materials are presented. The process of microcutting by a single diamond grain is examined, and relations between the components of the cutting force and the ratio of the rate of the main motion to the feed rate are obtained on the basis of known relationships. It is shown that adaptive control of the drilling nonmetallic materials is possible using two-circuit systems — one for feed-rate control and one for cutting-rate. __________ Translated from Steklo i Keramika, No. 3, pp. 28–30, March, 2007.     

Thermodynamic time and microstress tensor in Vakulenko's form

The significance of the concepts of thermodynamic time and microstress tensor introduced by A. A. Vakulenko for development of the theory of viscoplasticity is analyzed.Translated from Problemy Prochnosti, No. 5, pp. 56–58, May, 1991.     

Optimal representation of cycles in arithmetic graphs

The paper considers representation of Hamiltonian circuits by natural arithmetic graphs.Translated from Kibernetika, No. 1, pp. 17–20, January–February, 1991.     

Fine-line conductor manufacturing using drop-on demand PZT printingtechnology

An emerging selective metallization process to fabricate fine-line conductors based on drop-on-demand (DOD) ink jet printing and novel nano-particle fluid suspensions (NPFS) was studied. The suspensions consist of 1-10 nm silver or gold particulates that are homogeneously suspended in an organic carrier. A piezo-electric droplet generator driven by a bipolar voltage signal is used to dispense 50-70 μm diameter droplets traveling at 1-3 m/s before impacting a compliant polyimide substrate. The deposit/substrate composite is subsequently processed at 300°C for 15 min to allow for complete evaporation of the carrier and for sintering of the nano-particles, thereby yielding a finished circuit interconnect. Test vehicles created using this technique exhibit features as fine as 120 μm wide and 1 μm thick with resistivities on the order of 3.5×10^-5 Ωcm. The circuitry performed well under environmental conditioning. As expected, repeatability of circuitry fabrication showed sensitivity to the generation of steady, satellite-free droplets. In an effort to generate droplets consistently, it is essential to develop a strong fundamental understanding of the correlation between device excitation parameters and dispensed fluid properties, and to resolve the microrheological behavior of the NPFS when flowing through the droplet generator