PRA as a management tool: organizational factors and risk-based priorities for the maintenance of the tiles of the space shuttle orbiter

A probabilistic risk assessment (PRA) model, developed for the Thermal Protection System (TPS) of the space shuttle orbiter and presented in the previous paper, is used as a management tool to identify root-cause, organizational factors of the various failure modes. The objective is to set priorities in the process of resource allocation to minimize the risk of accident caused by the failure of the TPS. Starting with the technical characteristics of the system and the inputs of the risk assessment model, the approach is to identify the human decisions and actions and the key organizational factors that influence the risk.

Among the management factors that affect the reliability of the TPS are time pressures that have occurred in the past, liability concerns and conflicts among contractors, the low status of the tile work and material technicians among maintenance personnel, the absence of priorities in tile testing, and under-recognized couplings among subsystems (such as the external tank insulation as a source of debris that may hit the tiles). It is shown here how using the PRA results to set priorities in the maintenance of the tiles can allow reduction of the overall risk, and how critical zones of debris sources can be identified on the surface of the external tank and the solid rocket booster. It was found, for instance, that detecting and fixing loose tiles in the most risk-critical areas and securing insulation by up to 80%, and securing the insulation of external systems in specified areas could reduce the TPS risk by about 75%.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

Meta-analyses of age–cognition relations in adulthood: Estimates of linear and nonlinear age effects and structural models.

A meta-analysis was conducted on 91 studies to derive a correlation matrix for adult age, speed of processing, primary–working memory, episodic memory, reasoning, and spatial ability. Structural equation modeling with a single latent common cognitive factor showed that all cognitive measures shared substantial portions of age-related variance. A mediational model revealed that speed of processing and primary–working memory appear to be important mediators of age-related differences in the other measures. However, not all of the age-related influences were mediated. An examination of quadratic age effects and correlational patterns for subsamples under and over 50 years of age revealed that (a) negative age–cognition relations were significant for the 18- to 50-year-old sample and (b) the age-related decline accelerated significantly over the adult life span for variables assessing speed, reasoning, and episodic memory. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Accuracy and stability improvements of integral equation modelsusing the partial element equivalent circuit (PEEC) approach

The partial element equivalent circuit (PEEC) technique is a formulation which transforms an electric field integral equation (EFIE) into a full-wave equivalent circuit solution. In this paper, improvements are made to the PEEC model through the development of a refined method of computing both the partial inductances as well as the coefficients of potential. The method does not increase the number of unknowns. In addition, damping is added to the PEEC model in order to further reduce nonphysical resonances which may occur above the useful frequency range, The observations and solutions presented in this paper are especially important for time domain solvers. The effectiveness of the method is illustrated with several examples     

Attentional cues in chronic schizophrenia: Abnormal disengagement of attention.

M. I. Possner's 1980 reaction time (RT) paradigm was used to examine the engagement and disengagement operations of visual selective attention in patients with schizophrenia. In the 1st experiment 14 medicated, chronic schizophrenic Ss (diagnosed by criteria of the Diagnostic and Statistical Manual of Mental Disorders [DSM-I]), and 15 age-matched normal and control Ss made a speeded response to a target preceded by a valid, and invalid, or no cue. Control Ss showed the expected advantage and disadvantage in RT for valid and invalid cues, which suggests intact engagement and disengagement operations. For schizophrenic Ss, valid cues also enhanced RT, but invalid cues did not slow RT. Similar results were found in the 2nd experiment. The failure of unpredictable, invalid cues to inhibit RT in chronic schizophrenia may be related to an abnormality in the disengagement operation of selective attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

Political orientation and modern versus aversive racism: Tests of Dovidio and Gaertner's (1998) integrated model.

According to J. F. Dovidio and S. L. Gaertner's (1998) integrated model of racism, politically liberal European Americans tend to express racism differently than conservative European Americans, with liberals demonstrating aversive racism and conservatives, symbolic or modern racism. In support of the model, in Experiment 1 liberals showed bias in favor of a twice-prosecuted African American relative to a European American in their judgment of double jeopardy, whereas conservatives did the reverse. Experiment 2 replicated these effects while eliminating a confound in the design of Experiment 1. Experiment 3 found evidence for the intrapsychic conflict hypothesized to underlie aversive racism. Specifically, only liberals displayed greater physiological arousal to the touch of an African American versus a European American experimenter. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling of Moisture Behavior of Wood Planks in Nonvented Flat Roofs

A computer model was extended and adapted to simulate the hygrothermal behavior of building envelope-wood components. The model was used to predict moisture movement in wood planks forming the decks of nonvented flat roofs insulated with cellulose. The gradient of water potential was considered as the driving force for moisture movement in wood. The model required the determination of convective heat- and mass-transfer coefficients, the sorption curves, the effective water conductivity for different wood species, and the hygrothermal conditions within the assembly to characterize the mass-conservation equation. Once these parameters were integrated in the computer model, this approach was then validated by carrying a simulation of the drying process of wood planks using experimental data from a large-scale test.