Thermal and cardiovascular strain imposed by motorcycle protective clothing under Australian summer conditions

Motorcycle protective clothing can be uncomfortably hot during summer, and this experiment was designed to evaluate the physiological significance of that burden. Twelve males participated in four, 90-min trials (cycling 30 W) across three environments (25, 30, 35 °C [all 40% relative humidity]). Clothing was modified between full and minimal injury protection. Both ensembles were tested at 25 °C, with only the more protective ensemble investigated at 30 and 35 °C. At 35 °C, auditory canal temperature rose at 0.02 °C min^?1 (SD 0.005), deviating from all other trials (p < 0.05). The thresholds for moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 min (SD 20.6) and 180 min (SD 33.0), respectively. Profound hyperthermia might eventuate in ~10 h at 30 °C, but should not occur at 25 °C. These outcomes demonstrate a need to enhance the heat dissipation capabilities of motorcycle clothing designed for summer use in hot climates, but without compromising impact protection.

Practitioner’s Summary:

Motorcycle protective clothing can be uncomfortably hot during summer. This experiment was designed to evaluate the physiological significance of this burden across climatic states. In the heat, moderate (>38.5 °C) and profound hyperthermia (>40.0 °C) were predicted to occur within 105 and 180 min, respectively.     

SmartCanvas: Context‐inferred Interpretation of Sketches for Preparatory Design Studies

In early or preparatory design stages, an architect or designer sketches out rough ideas, not only about the object or structure being considered, but its relation to its spatial context. This is an iterative process, where the sketches are not only the primary means for testing and refining ideas, but also for communicating among a design team and to clients. Hence, sketching is the preferred media for artists and designers during the early stages of design, albeit with a major drawback: sketches are 2D and effects such as view perturbations or object movement are not supported, thereby inhibiting the design process. We present an interactive system that allows for the creation of a 3D abstraction of a designed space, built primarily by sketching in 2D within the context of an anchoring design or photograph. The system is progressive in the sense that the interpretations are refined as the user continues sketching. As a key technical enabler, we reformulate the sketch interpretation process as a selection optimization from a set of context‐generated canvas planes in order to retrieve a regular arrangement of planes. We demonstrate our system (available at http:/geometry.cs.ucl.ac.uk/projects/2016/smartcanvas/ ) with a wide range of sketches and design studies.     

A hybrid (visual/natural) controlled language

We define the notion of controlled hybrid language that allows information share and interaction between a controlled natural language (specified by a context-free grammar) and a controlled visual language (specified by a Symbol-Relation grammar). We present the controlled hybrid language INAUT, used to represent nautical charts of the French Naval and Hydrographic Service (SHOM) and their companion texts (Instructions nautiques).     

Monte Carlo randomization tests for large-scale abundance datasets on the GPU

Statistical tests are often performed to discover which experimental variables are reacting to specific treatments. Time-series statistical models usually require the researcher to make assumptions with respect to the distribution of measured responses which may not hold. Randomization tests can be applied to data in order to generate null distributions non-parametrically. However, large numbers of randomizations are required for the precise p-values needed to control false discovery rates. When testing tens of thousands of variables (genes, chemical compounds, or otherwise), significant q-value cutoffs can be extremely small (on the order of 10⁻⁵ to 10⁻⁸). This requires high-precision p-values, which in turn require large numbers of randomizations. The NVIDIA^® Compute Unified Device Architecture^® (CUDA^®) platform for General Programming on the Graphics Processing Unit (GPGPU) was used to implement an application which performs high-precision randomization tests via Monte Carlo sampling for quickly screening custom test statistics for experiments with large numbers of variables, such as microarrays, Next-Generation sequencing read counts, chromatographical signals, or other abundance measurements. The software has been shown to achieve up to more than 12 fold speedup on a Graphics Processing Unit (GPU) when compared to a powerful Central Processing Unit (CPU). The main limitation is concurrent random access of shared memory on the GPU. The software is available from the authors.     

Understanding the outsourcing learning curve: A longitudinal analysis of a large Australian company

Outsourcing continues to capture the attention of researchers as more companies move to outsourcing models as part of their business practice. Two areas frequently researched and reported in the literature are the reasons why a company decides to outsource, and outsourcing success factors. This paper describes an in-depth, longitudinal case study that explores both the reasons why the company decided to outsource and factors that impact on success. The paper describes how Alpha, a very large Australian communications company, approached outsourcing and how its approach matured over a period of 9 years. The paper concludes that although a number of reasons are proposed for a company's decision to outsource, lowering costs was the predominant driver in this case. We also describe other factors identified as important for outsourcing success such as how contracts are implemented, the type of outsourcing partner arrangement, and outsourcing vendor capabilities.

Method of imaging low density lipoproteins by atomic force microscopy

This short paper reports a simple method to image low density lipoproteins (LDL) using atomic force microscopy (AFM). This instrument allows imaging of biological samples in liquid and presents the advantage of needing no sample preparation such as staining or fixation that may affect their general structure. Dimensions (diameter and height) of individual LDL particles were successfully measured. AFM imaging revealed that LDL have a quasi-spherical structure on the x and y axis with an oblate spheroid structure in the z axis (i.e., height). LDLs were found to have an average diameter of 23 +/- 3 nm. The obtained mean height was 10 +/- 2 nm.     

Whatever happened to neurosis? An overview.

Discusses the decision to eliminate the term "neurosis" from the DSM-III. The history of the term is traced; weaknesses of DSM-II pertaining to neurosis are presented; theoretical and political processes in the deletion procedure are described; and an overview is given of the current resolution as presented in DSM-III. Instead of neurosis, "neurotic disorder" and "neurotic process" were distinguished to reduce potential theoretical bias. The process may or may not be seen by the clinician as causal in the disorder, but those of all theoretical persuasions should be able to agree on what the disorder is. (13 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

From Water Poverty to Water Prosperity—A More Participatory Approach to Studying Local Water Resources Management

The Water Poverty Index (WPI), a tool designed for integrated analysis of water issues, was set-up in a community in Madhya Pradesh, India through a transparent and participatory process. Though the aim of the WPI is to primarily use existing statistical data, quantitative information from census and local records was combined with qualitative data from community interviews and participatory exercises. The inclusion of community chosen indicators and the adjustment of values so that higher numbers represent water prosperity rather than water poverty, led to the Water Prosperity Index (WPI⁺). The WPI?⁺?score was contrasted with the WPI at community level. It was also calculated for two community areas with different caste and socio-economic characteristics and weighted separately according to water issues prioritized by men and women. The WPI?⁺?revealed a great difference in water access between the two areas and in prioritized issues between men and women illustrating the importance of appropriate spatial representation and gender sensitive assessments for revealing important disparities. Results also showed that highly aggregated data hide these differences making it more difficult to target the most vulnerable groups when planning measures to increase equitable water allocation. While quantitative data reveal an important perspective of the water situation, qualitative data about adequacy of resources, services or institutions, improve understanding of which issues to prioritize. A valid and useful community water index must be based on representative participation, transparency and local influence on the methodology and subsequent results.     

Overcoming challenges in the study of nitrided microalloyed steels using atom probe

Nitrided steels are widely used in the engineering field due to their superior hardness and other attractive properties. Atom probe tomography (APT) was employed to study two Nb-microalloyed CASTRIP steels with different N contents. A major challenge of using APT to study this group of materials is the presence of tails after Fe peaks in the mass spectra, which overestimates the composition for alloying elements such as Nb and Cu in the steels. One important factor that contributes to the tails is believed to be delayed field evaporation from Fe²⁺. This artefact of the mass spectrum was observed to be the most severe when voltage pulsing was used. The application of laser pulses with energy ranging from 0.2 to 1.2 nJ successfully reduced the tails and lead to better compositional measurement accuracy. Spatial resolution in the z-direction (along the tip direction) was observed to be less affected by changing laser energy but deteriorates in x-y direction with increasing laser energy. This investigation suggests that pulsed-laser atom probe with ∼0.4 nJ laser energy can be used to study this group of materials with improved mass resolution while still maintaining high spatial resolution.