Regulating Water Adhesion on Superhydrophobic TiO2 Nanotube Arrays

Bioinspired surfaces with special wettability have attracted a significant attention in recent years because of their potential applications for no loss liquid transfer, anti‐icing, and self‐cleaning. Herein, the realization of two extreme superhydrophobic states on 1H, 1H, 2H, 2H–perfluorooctyltriethoxysilane‐modified TiO₂ nanotube arrays (NTAs) is described by changing the structural characteristics of nanotubes while keeping the surface chemical composition constant. The water adhesive force is regulated in a wide range from ≈4.4 to ≈89.6 μN by the nanotubular diameter, length, density, and surface roughness. The cooperation effect between the negative pressures induced by the volume change of sealed air‐pockets and the van der Waals' attraction at solid–liquid interface contributes to the water adhesion. The superhydrophobic TiO₂ NTAs with a high adhesive force is used as a “mechanical hand” to transfer water microdroplets without any loss, and the one with extremely low adhesive force is utilized as a self‐cleaning and anti‐icing surface.     

Simulations and experiments for optimal deployment of an RFID‐based location‐aware system

The proliferation of communication and mobile computing devices and local‐area wireless networks has cultivated a growing interest in location‐aware systems and services. An essential problem in location‐aware computing is the determination of physical locations. RFID technologies are gaining much attention, as they are attractive solutions to indoor localization in many healthcare applications. In this paper, we propose a new indoor localization methodology that aims to deploying RFID technologies in achieving accurate location‐aware undertakings with real‐time computation. The proposed algorithm introduces means to improve the accuracy of the received RF signals. Optimal settings for the parameters in terms of reader and reference tag properties were investigated through simulations and experiments. The experimental results indicate that our indoor localization methodology is promising in applications that require fast installation, low cost and high accuracy. Copyright © 2009 John Wiley & Sons, Ltd.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Fabrication of thick, high-quality strained SiGe layer on ultra-thin silicon-on-insulator and modeling of film strain

Fabrication of a thick strained SiGe layer on bulk silicon is hampered by the lattice mismatch and difference in the thermal expansion coefficients between Si and SiGe, and a high Ge content leads to severe strain in the SiGe film. When the thickness of the SiGe film is above a critical value (90 nm for 18% Ge), drastic deterioration of the film properties as well as dislocations will result. In comparison, a silicon-on-insulator (SOI) substrate with a thin top Si layer can mitigate the problems and so a thick SiGe layer with high Ge concentration can conceivably be synthesized. In the work reported here, a 110 nm thick high-quality strained Si_0.82Ge_0.18 layer was fabricated on an ultra-thin SOI substrate with a 30 nm top silicon layer using ultra-high vacuum chemical vapor deposition (UHVCVD). The thickness of the SiGe layer is larger than the critical thickness on bulk Si. Cross-sectional transmission electron microscopy (XTEM) reveals that the SiGe layer is dislocation-free and the atoms at the SiGe/Si interface are well aligned, even though X-ray diffraction (XRD) data indicate that the SiGe film is highly strained. The strain factors determined from the XRD and Raman results agree well.     

基于DSP+CPLD的高精度信号发生器

介绍了基于直接数字式频率合成(DDS)原理的全数字信号发生器(DSP),利用DSP芯片快速、高精度的运算优势以及CPLD芯片灵活的编程逻辑、大容量存储功能的特点,采用通用可编程芯片以及数字波形合成技术,形成高稳定、高精度、高动态的数字合成信号.该信号发生器可产生0～25 kHz的正弦波、三角波和方波,输出电压峰峰值为0～5 V,频率步进1 Hz,幅度步进0.001 V.     

基于CORDIC的一种高速实时定点FFT的FPGA实现

本文论述了一种利用CORDIC算法在FPGA上实现高速实时定点FFF的设计方案。利用CORDIC算法来实现复数乘法，与使用乘法器相比降低了系统的资源占用率，提高了系统速度[1]。设计基于基4时序抽取FFT算法，采用双端口内置RAM和流水线串行工作方式。本设计针对256点、24位长数据进行运算，在XilnxSpartan2E系列的xc2s300e器件下载验证通过，完成一次运算约为12μs，可运用于高速DSP、数字签名算法等对速度要求高的领域。     

Transient analysis of microwave active circuits based ontime-domain characteristic models

A modular method is presented to speed up transient simulation of microwave active circuits which consist of linear components and active devices that are often nonlinear. Firstly, the linear components and active devices are individually characterized by time-domain characteristic models (TDCM's) and lumped equivalent circuits, respectively, to reduce the computer memory. Then, based on deconvolution, the TDCM's of linear components are synthesized from the terminal voltages and currents of step voltage excitation, which are simulated by the finite-difference time-domain (FDTD) method. Finally, transient analysis of a one-dimensional (1-D) discrete-time system is applied to obtain the terminal responses of the microwave active circuits, in which a larger sampled step is chosen to reduce the simulation time. This method is employed to two realistic circuits to validate its efficiency and accuracy. The results are in good agreement with the time-consuming direct FDTD simulation of entire circuits     

Performance analysis of an improved MMSE multiuser receiver formismatched delay channels

Motivated by the fact that time delays in a practical direct-sequence code-division multiple-access (DS-CDMA) system can never be perfectly estimated, an improved minimum-mean squared-error (MMSE)-based receiver is proposed and analyzed. Via the simple assumption of a probability distribution for the delay estimation errors, the proposed receiver can achieve a performance superior to that of the conventional MMSE (CMMSE) receiver. The performances of this improved receiver and the CMMSE receiver are compared in terms of the mean squared error (MSE), probability of error, and asymptotic multiuser efficiency (AME). As the original definition of AME does not consider mismatched channels, the behavior of three single-user receivers bearing imperfect delay estimation is also investigated. These single-user receivers are employed to define a more appropriate AME. Finally, an efficient update mechanism to accommodate dynamic channel statistics, and thus practical implementation, is proposed     

HgCdTe离子注入掺杂及损伤特性

运用红外反射谱，背散射谱和二次离子质谱等方法研究ＨｇＣｄＴｅ注入Ｂ、Ｐ、Ｉｎ和Ａｓ等元素的掺杂与损伤特性。     

柱边边缘扫描检出模型的研究

本文建立了两种通用的柱边边缘扫描（白光扫描和激光扫描）检出的理论模型，给出了这两种模型的计算机仿真曲线，分析了影响边缘检出灵敏度的因素，并通过三种边缘检出方法验证了这两种模型的正确性。