Direct vapor phase growth process and robust photoluminescence properties of large area MoS2 layers

There has been growing research interest in the use of molybdenum disulfide in the fields of optoelectronics and energy harvesting devices, by virtue of its indirect-to-direct band gap tunability. However, obtaining large area thin films of MoS2 for future device applications still remains a challenge. In the present study, the amounts of the precursors （S and MOO3） were varied systematically in order to optimize the growth of highly crystalline and large area MoS2 layers by the chemical vapor deposition method. Careful control of the amounts of precursors was found to the key factor in the synthesis of large area highly crystalline flakes. The thickness of the layers was confirmed by Raman spectroscopy and atomic force microscopy. The optical properties and chemical composition were studied by photoluminescence （PL） and X-ray photoelectron spectroscopy. The emergence of strong direct excitonic emissions at 1.82 eV （A-exciton, with a normalized PL intensity of -55 × 10^3） and 1.98 eV （B-exciton, with a normalized PL intensity of -5 × 10^3） of the sample at room temperature clearly indicates the high luminescence quantum efficiency. The mobility of the films was found to be 0.09 cm^2/（V.s） at room temperature. This study provides a method for the controlled synthesis of high-quality two-dimensional （2D） transition metal dichalcogenide materials, useful for applications in nanodevices, optoelectronics and solar energv conversion.     

Transport properties of 1,1,1,2-tetrafluoroethane (R134a)

New equations for the thermal conductivity and the viscosity of R134a that are valid in a wide range of pressures and temperatures are presented. They were obtained through a theoretically based, critical evaluation of the available experimental data, which showed considerable inconsistencies between data sets, in particular in the vapor phase. In the critical region the observed enhancement in the thermal conductivity is well represented by a crossover model for the transport properties of fluids. Since thermodynamic properties enter into the calculation of the critical enhancement of the transport properties, a new fundamental equation for the critical region was developed also.Paper dedicated to Professor Joseph Kestin.     

Hybrid Petri-nets for modelling and performance evaluation of supply chains

Modelling and analysis of complex and co-ordinated supply chains is a crucial task due to its inherent complexity and uncertainty. Therefore, the current research direction is to devise an efficient modelling technique that maps the dynamics of a real life supply chain and assists industrial practitioners in evaluating and comparing their network with other competing networks. Here an effective modelling technique, the hybrid Petri-net, is proposed to efficiently handle the dynamic behaviour of the supply chain. This modelling methodology embeds two enticing features, i.e. cost and batch sizes, in deterministic and stochastic Petri-net for the modelling and performance evaluation of supply chain networks. The model is subsequently used for risk management to investigate the issues of supply chain vulnerability and risk that has become a major research subject in recent years. In the test bed, a simple productive supply chain and an industrial supply chain are modelled with fundamental inventory replenishment policy. Subsequently, its performance is evaluated along with the identification and assessment of risk factors using analytical and simulation techniques respectively. Thus, this paper presents a complete package for industrial practitioners to model, evaluate performance and manage risky events in a supply chain.     

Neutrophils Mediate Pulmonary Artery Thrombosis In Situ

Pulmonary embolism is a life-threatening condition, which can result in respiratory insufficiency and death. Blood clots occluding branches of the pulmonary artery (PA) are traditionally considered to originate from thrombi in deep veins (usually in legs). However, growing evidence suggests that occlusion of the vessels in the lungs can develop without preceding deep vein thrombosis (DVT). In this work, we used an inferior vena cava (IVC) complete ligation model of DVT in Wistar rats to explore the possibility and mechanisms of PA thrombosis under the conditions where all routes of thrombotic mass migration from peripheral veins are blocked. We demonstrate that rats both with normal and reduced neutrophil counts developed thrombi in the IVC, although, neutropenia caused a substantial decrease in thrombus size and a shift from fresh fibrin toward mature fibrin and connective tissue inside the thrombus. Massive fibrin deposition was found in the PA branches in the majority of DVT rats with normal neutrophil counts, but in none of the neutropenic animals. Neutrophil ablation also abolished macroscopic signs of lung damage. Altogether, the results demonstrate that thrombi in the lung vasculature can form in situ by mechanisms that require local neutrophil recruitment taking place in the DVT setting.     

A Petri Net based approach to determine the disassembly strategy of a product

In order to protect the environment and regain value added to products, a process known as disassembly has come into the limelight. This process is to be applied to reuse abandoned goods and materials. Manufacturers are being forced to establish disassembly plants and to develop their products' designs so as to maintain the government's dictate to dispose off their products in an environmentally responsible manner. This research presents a cost-based heuristic analysis for a circuit board assembly. Various components of the product and their assembly relationships are represented by a Petri Net diagram. Firing the transitions of the disassembly Petri Net is integrated with cost-based indices to develop an effective disassembly strategy. The methodology discussed here simplifies the decisionmaking process involved in disassembly planning. A comprehensive disassembly process planning system is proposed here and is exemplified by a case study of circuit board assembly.     

Low temperature synthesis of silver-palladium alloy powders internal electrodes for multilayer ceramic devices

Physical and electrical properties of three types of Ag-Pd pastes, which consist of different metal fine powders, i.e., a coprecipitated powder, an agglomerated alloy powder made by heat treatment and a pulverized alloy powder produced by improved pulverization method, have been studied. The paste prepared from pulverized alloy powder showed a higher film packing density (6.3 g/cm³) than those made of the other powders. The film consisting of pulverized alloy powder showed a lower expansion at around 500 °C, a lower shrinkage from 700 °C to 1100 °C and a lower electric resistivity. The results indicated that the paste which consists of an pulverized Ag-Pd alloy powder was superior in performance to the other two pastes for an internal electrode material of multilayer ceramic device.     

Chemical doping and improved flux pinning in Hg-based superconductors

Chemical doping of a small amount (0.020.3) of rhenium (Re) ion into HgBa₂Ca_n–1Cu_nO_y(n=14) has been studied. The flux pinning strength in these Hg-based superconductors is significantly enhanced compared to the undoped parent materials. Neutron diffraction analysis of representative samples (n=3) revealed that Re partially substitutes the Hg-site with octahedrally fully coordinated oxygen atoms, giving rise to the stabilization of Hg(Re)O layer and reduction of this blocking layer thickness. Associated with the expected hybridization of Re-5d and O-2p orbitals and possible metallization of the Hg(Re)O layer, the improved flux pinning behavior is considered to be caused by the decrease of the electromagnetic anisotropy and the enhanced interlayer superconducting coupling strength.     

Study of amperometric diffusion solid-state electrolyte cell operating regimes

Different operating regimes are considered for operation of an amperometric diffusion solid-state electrolyte cell for measuring the volume fraction of oxygen. The design of an oxygen sensor is described. Experimental results confirm the efficiency of the proposed diffusion solid-state electrolyte cell for measuring oxygen in the range of 98–100%. Translated from Izmeritel’naya Tekhnika, No. 10, pp. 64–65, October, 2008.