High‐Performance Piezoelectric,Pyroelectric, and Triboelectric Nanogenerators Based on P(VDF‐TrFE) with Controlled Crystallinity and Dipole Alignment

Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), as a ferroelectric polymer, offers great promise for energy harvesting for flexible and wearable applications. Here, this paper shows that the choice of solvent used to dissolve the polymer significantly influences its properties in terms of energy harvesting. Indeed, the P(VDF‐TrFE) prepared using a high dipole moment solvent has higher piezoelectric and pyroelectric coefficients and triboelectric property. Such improvements are the result of higher crystallinity and better dipole alignment of the polymer prepared using a higher dipole moment solvent. Finite element method simulations confirm that the higher dipole moment results in higher piezoelectric, pyroelectric, and triboelectric potential distributions. Furthermore, P(VDF‐TrFE)‐based piezoelectric, pyroelectric, and triboelectric nanogenerators (NGs) experimentally validate that the higher dipole moment solvent significantly enhances the power output performance of the NGs; the improvement is about 24% and 82% in output voltage and current, respectively, for piezoelectric NG; about 40% and 35% in output voltage and current, respectively, for pyroelectric NG; and about 65% and 75% in output voltage and current for triboelectric NG. In brief, the approach of using a high dipole moment solvent is very promising for high output P(VDF‐TrFE)‐based wearable NGs.     

Improved Performance in FeF2 Conversion Cathodes through Use of a Conductive 3D Scaffold and Al2O3 ALD Coating

FeF₂ is considered a promising conversion compound for the positive electrode in lithium‐ion batteries due to its high thermodynamic reduction potential (2.66 V vs Li/Li⁺) and high theoretical specific capacity (571 mA h g^?1). However, the sluggish reaction kinetics and rapid capacity decay caused by side reactions during cycling limit its practical application. Here, the fabrication of Ni‐supported 3D Al₂O₃‐coated FeF₂ electrodes is presented, and it is shown that these structured electrodes significantly overcome these limitations. The electrodes are prepared by iron electrodeposition on a Ni support, followed by a facile fluorination process and Al₂O₃ coating by atomic layer deposition. The 3D FeF₂ electrode delivers an initial discharge capacity of 380 mA h g^?1 at a current density of 200 mA g^?1 at room temperature. The 3D scaffold improves the reaction kinetics and enables a high specific capacity by providing an efficient electron pathway to the insulating FeF₂ and short Li diffusion lengths. The Al₂O₃ coating significantly improves the cycle life, probably by preventing side reactions through limiting direct electrode–electrolyte contact. The fabrication method presented here can also be applied for synthesis of other metal fluoride materials on different 3D conductive templates.     

Fast,Scalable Synthesis of Micronized Ge3N4@C with a High Tap Density for Excellent Lithium Storage

Nanostructuring has significantly contributed to alleviating the huge volume expansion problem of the Ge anodes. However, the practical use of nanostructured Ge anodes has been hindered due to several problems including a low tap density, poor scalability, and severe side reactions. Therefore, micrometer-sized Ge is desirable for practical use of Ge-based anode materials. Here, micronized Ge₃N₄ with a high tap density of 1.1 mg cm⁻² has been successfully developed via a scalable wet oxidation and a subsequent nitridation process of commercially available micrometer-sized Ge as the starting material. The micronized Ge₃N₄ shows much-suppressed volume expansion compared to micrometer-sized Ge. After the carbon coating process, a thin carbon layer (≈3 nm) is uniformly coated on the micronized Ge₃N₄, which significantly improves electrical conductivity. As a result, micronized Ge₃N₄@C shows high reversible capacity of 924 mAh g⁻¹ (2.1 mAh cm⁻²) with high mass loading of 3.5 mg cm⁻² and retains 91% of initial capacity after 300 cycles at a rate of 0.5 C. Additionally, the effectiveness of Ge₃N₄@C as practical anodes is comprehensively demonstrated for the full cell, showing stable cycle retention and especially excellent rate capability, retaining 47% of its initial capacity at 0.2 C for 12 min discharge/charge condition.     

Biodegradable Polyanhydrides as Encapsulation Layers for Transient Electronics

Bioresorbable electronic systems represent an emerging class of technology of interest due to their ability to dissolve, chemically degrade, disintegrate, and/or otherwise physically disappear harmlessly in biological environments, as the basis for temporary implants that avoid the need for secondary surgical extraction procedures. Polyanhydride‐based polymers can serve as hydrophobic encapsulation layers for such systems, as a subset of the broader field of transient electronics, where biodegradation eventually occurs by chain scission. Systematic experimental studies that involve immersion in phosphate‐buffered saline solution at various pH values and/or temperatures demonstrate that dissolution occurs through a surface erosion mechanism, with little swelling. The mechanical properties of this polymer are well suited for use in soft, flexible devices, where integration can occur through a mold‐based photopolymerization technique. Studies of the dependence of the polymer properties on monomer compositions and the rates of permeation on coating thicknesses reveal some of the underlying effects. Simple demonstrations illustrate the ability to sustain operation of underlying biodegradable electronic systems for durations between a few hours to a week during complete immersion in aqueous solutions that approximate physiological conditions. Systematic chemical, physical, and in vivo biological studies in animal models reveal no signs of toxicity or other adverse biological responses.     

Towards Efficient Integrated Perovskite/Organic Bulk Heterojunction Solar Cells: Interfacial Energetic Requirement to Reduce Charge Carrier Recombination Losses

Integrated perovskite/organic bulk heterojunction (BHJ) solar cells have the potential to enhance the efficiency of perovskite solar cells by a simple one‐step deposition of an organic BHJ blend photoactive layer on top of the perovskite absorber. It is found that inverted structure integrated solar cells show significantly increased short‐circuit current (J_sc) gained from the complementary absorption of the organic BHJ layer compared to the reference perovskite‐only devices. However, this increase in J_sc is not directly reflected as an increase in power conversion efficiency of the devices due to a loss of fill factor. Herein, the origin of this efficiency loss is investigated. It is found that a significant energetic barrier (≈250 meV) exists at the perovskite/organic BHJ interface. This interfacial barrier prevents efficient transport of photogenerated charge carriers (holes) from the BHJ layer to the perovskite layer, leading to charge accumulation at the perovskite/BHJ interface. Such accumulation is found to cause undesirable recombination of charge carriers, lowering surface photovoltage of the photoactive layers and device efficiency via fill factor loss. The results highlight a critical role of the interfacial energetics in such integrated cells and provide useful guidelines for photoactive materials (both perovskite and organic semiconductors) required for high‐performance devices.     

A High‐Potential Anion‐Insertion Carbon Cathode for Aqueous Zinc Dual‐Ion Battery

Aqueous dual‐ion batteries (DIBs) are promising for large‐scale energy storage due to low cost and inherent safety. However, DIBs are limited by low capacity and poor cycling of cathode materials and the challenge of electrolyte decomposition. In this study, a new cathode material of nitrogen‐doped microcrystalline graphene‐like carbon is investigated in a water‐in‐salt electrolyte of 30 m ZnCl₂, where this carbon cathode stores anions reversibly via both electrical double layer adsorption and ion insertion. The (de)insertion of anions in carbon lattice delivers a high‐potential plateau at 1.85 V versus Zn²⁺/Zn, contributing nearly 1/3 of the capacity of 134 mAh g^?1 and half of the stored energy. This study shows that both the unique carbon structure and concentrated ZnCl₂ electrolyte play critical roles in allowing anion storage in carbon cathode for this aqueous DIB.     

Thermally Controlled,Active Imperceptible Artificial Skin in Visible‐to‐Infrared Range

Cephalopods’ extraordinary ability to hide into any background has inspired researchers to reproduce the intriguing ability to readily camouflage in the infrared (IR) and visible spectrum but this still remains as a conundrum. In this study, a multispectral imperceptible skin that enables human skin to actively blend into the background both in the IR‐visible integrated spectrum only by simple temperature control with a flexible bi‐functional device (active cooling and heating) is developed. The thermochromic layer on the outer surface of the device, which produces various colors based on device surface temperature, expands the cloaking range to the visible spectrum (thus visible‐to‐IR) and ultimately completes day‐and‐night stealth platform simply by controlling device temperature. In addition, the scalable pixelization of the device allows localized control of each autonomous pixel, enabling the artificial skin surface to adapt to the background of the sophisticated pattern with higher resolution and eventually heightening the level of imperceptibility. As this proof‐of‐concept can be directly worn and conceals the human skin in multispectral ranges, the work is expected to contribute to the development of next‐generation soft covert military wearables and perhaps a multispectral cloak that belongs to cephalopods or futuristic camouflage gadgets in the movies.