CNT/PDMS composite membranes for H2 and CH4 gas separation

Polydimethylsiloxane (PDMS) composites with different weight amounts of multi-walled carbon nanotubes (MWCNT) were synthesised as membranes to evaluate their gas separation properties. The selectivity of the membranes was investigated for the separation of H₂ from CH₄ gas species. Membranes with MWCNT concentrations of 1% increased the selectivity to H₂ gas by 94.8%. Furthermore, CH₄ permeation was almost totally blocked through membranes with MWCNT concentrations greater than 5%. Vibrational spectroscopy and X-ray photoelectron spectroscopy techniques revealed that upon the incorporation of MWCNT a decrease in the number of available Si–CH₃ and Si–O bonds as well as an increase in the formation of Si–C bonds occurred that initiated the reduction in CH₄ permeation. As a result, the developed membranes can be an efficient and low cost solution for separating H₂ from larger gas molecules such as CH₄.     

Induced superabsorbency in polyester fiber

Modified polyester fibers are considered as a significant part of the polyester produced throughout the world due to the new properties and also reduced undesirable properties, compared to non-modified polyester fibers. In this study, the modification of polyester fiber properties was evaluated for its superabsorbency. The fibers obtained superabsorbency by their treatment with a special latex prepared by inverse emulsion polymerization. Different polymer latexes based on acrylic acid, sodium acrylate, acrylamide (AM) and 2-acrylamide-2-methyl propane sulfonic acid were prepared using inverse emulsion polymerization. Chemical bond (or hydrogen bond) was formed between the functional groups of the fiber surface and functional groups present in the polymer latex by heating. The modified fibers were characterized by swelling, mechanical, morphological, and thermal measurements. The effect of several modifications of parameters such as latex type, AM content in latex, aquatic-organic phase ratios of latex, modification time and modification temperature on the swelling properties of fibers were investigated. Water absorption of the unmodified fiber was 1.5 g/g which increased up to 75 g/g, significantly. This considerable development in hydrophilic characteristics of polyester fibers has led to water blocking of the fiber. Such modification did not have adverse effects on the tensile properties or thermal resistance of the polyester fiber.     

Atomically thin layers of MoS2 via a two step thermal evaporation-exfoliation method

Two dimensional molybdenum disulfide (MoS(2)) has recently become of interest to semiconductor and optic industries. However, the current methods for its synthesis require harsh environments that are not compatible with standard fabrication processes. We report on a facile synthesis method of layered MoS(2) using a thermal evaporation technique, which requires modest conditions. In this process, a mixture of MoS(2) and molybdenum dioxide (MoO(2)) is produced by evaporating sulfur powder and molybdenum trioxide (MoO(3)) nano-particles simultaneously. Further annealing in a sulfur-rich environment transforms majority of the excess MoO(2) into layered MoS(2). The deposited MoS(2) is then mechanically exfoliated into minimum resolvable atomically thin layers, which are characterized using micro-Raman spectroscopy and atomic force microscopy. Furthermore Raman spectroscopy is employed to determine the effect of electrochemical lithium ion exposure on atomically thin layers of MoS(2).     

Effect of Flank Wear on the Topography of Machined Surfaces

The effect of flank wear on the topography of machined surfaces is investigated by studying its effect on the shape of the tool nose. For this purpose, turning experiments were performed to produce surfaces corresponding to different levels of flank wear. The distribution of flank wear at the tool nose during these experiments caused the nose radius to decrease, which when replicated on the machined surface resulted in narrower and deeper feedmarks. This change in the geometry of feedmarks was represented by the increase in the arithmetic average roughness of the surface profile heights.     

Acoustic startle response in young and aging C57BL/6J and CBA/J mice.

C57 mice demonstrate progressive age-related hearing loss during the 1st yr, whereas CBA mice lose little sensitivity through 18 mo of age. The acoustic startle response (ASR) was measured to determine behavioral correlates of aging with and without presbycusis. Stimuli were tone pips with frequencies of 4–24 kHz at intensities of 70–200 dB SPL. ASR thresholds increased with age, and startle amplitudes became smaller. Changes in startle parameters were more pronounced in C57 mice, with middle to high frequencies severely affected. Startle latencies at and above ASR threshold increased with age in C57 mice. CBA data indicate that aging has little effect on ASR parameters; the C57 data show that hearing loss is a cogent factor. ASR parameters of C57 mice are altered to a greater extent than expected, on the basis of the elevations of absolute sensory thresholds, particularly for middle frequencies. Both peripheral and central mechanisms may account for the discrepancy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Rheology of Glaze Suspensions

Rheological properties of suspensions and ceramic glaze slurries under steady flow conditions have been considered. Colloidal forces play an important role in the rheology of such ceramic slurries. Since the potential function characterizes the rheology of colloidal systems, a new dimensionless group, viz. potential number, is introduced within a dimensional analysis representing the relative significance of the potential to the Brownian energy. In order to relate the relative viscosity to other dimensionless groups, a new model is proposed by the inclusion of an extra term in addition to that of the hard‐sphere theory owing to the fact that the presence of colloidal forces always increases the fluid viscosity with respect to that predicted by the hard‐sphere. Steady viscosity measurements have been carried out on ceramic glaze suspensions at different volume fractions, particle diameters, and shear rates. Experimental results have been used to modify the model relating the relative viscosity to the Péclet number, potential number, volume fraction, and maximum packing fraction.     

Broadband-CDMA overlay

A Broadband Code Division Multiple Access (B-CDMA) technique is presented that will overlay the existing cellular telephone spectrum (825 to 894MHz). The overlay will provide additional capacity to the network while allowing high quality voice and high speed data services to be coexistent with the existing cellular services (AMPS and TDMA). The advantages of using B-CDMA in a fading environment are analyzed. The low level of mutual interference between the existing cellular telephone system and the B-CDMA overlay system is shown.Portions of this paper have been submitted as partial fulfillment of the requirements of the Ph.D. dissertation in electrical engineering at the City College of New York.