复合泡沫塑料的性能改进研究

为改善复合泡沫塑料的介电性能,采用金属氧化物粒子填充改性双马来酰亚胺空芯玻璃微球复合泡沫塑料得到了高介电常数、低介质损耗因数、低密度、力学性能良好的电介质材料。     

以人为本的儿童医院候诊设施及服务系统的构建原则初探——以无锡儿童医院输液候诊区为例

旅游发展既促进了江南水乡传统建筑景观的保护,又对其产生了消极影响。旅游的消极影响表现在旅游容量对水乡建筑环境的压力,旅游的商业化、低俗化对建文章从以人为本(HCD)的设计理念出发,结合服务设计中接触点的分析方法,以无锡儿童医院输液候诊区为例,进行服务流程失败点的分析。提出以设计介入儿童医院候诊设施及服务系统构建的四大原则,旨在提升国内儿童医院候诊效率和服务水平,为新医疗服务模式提供案例参考。     

阿根廷工艺设计师马塞洛·卢西尼的本土意识

阿根廷首都布宜诺斯艾利斯被称为拉丁美洲的"巴黎",工艺设计师马塞洛·卢西尼的自创品牌airedelsur工作室就在这个美丽的城市。他的设计充分体现了在潘帕平原这片广袤的土地上,众多的民族文化和丰富的艺术气息。运用自己国家的民族特色来进行工艺设计,使设计师马塞洛·卢西尼的创作看起来既生动又独特。他的设计是现代与民族的完美结合,看似简洁大方,其实材料和制作的过程中包含的都是阿根廷本土的民族文化。这种本土文化运用在设计领域的成功案例给处在探索中的当代中国设计师以启发。     

一种新的S/PDIF接收机数据译码的实现方法

论文分析了S/PDIF音频数据流的特点,引入模式识别中的训练机对S/PDIF音频数据流进行现场脉冲宽度特征提取。依据训练机结果建立分类器实现脉冲宽度分类,根据脉冲宽度进行同步前置码和逻辑电平的解码。利用硬件描述语言Verilog进行设计实现与验证,仿真结果说明这种特征提取方法可以提高S/PDIF接收机数据解译码的适应性和准确性。     

对人学五个"要义"和"以人为本"内涵的看法——与顾智明教授商榷

顾智明教授对人学五个"要义"和"以人为本"内涵的阐释,由于没掌握"事物本质是由实践定位的"这个马克思主义的根本方法,因而便导致了其对"一般人"、"具体人"界定不清,对科学发展观中"以人为本"的人,具有双重的价值取向的内涵(在人与物比较上,则"以人为本";在执政党或领导干部与人民群众比较上,则以人民为本),界定不明,因此,他没有回答出马克思主义人学和科学发展观中"以人为本"的人的真谛.这种"马克思主义人学与思想政治工作创新"除作者或极少部分研究者明白外,很难变为群众或广大官兵认识和改造世界之武器的.     

Possible Energy Network with polygeneration system and CCS for China

On basis of adopting polygeneration systems for power and alternative fuels,capturing CO2 with near zero energy penalties,and storing CO2 on sites,a new kind of Energy Network can integrate energy utilization,CO2 capture,transportation and storage synthetically.Techno-economic analysis of this solution focusing on Inner Mongolia and the Yangtze River Delta districts had been carried with comparison to the chain method for energy utilization and CO2 sequestration.This solution can save 21.5% of energy,and re...     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

Fuel combustion test in constant volume combustion chamber with built-in adaptor

Combustion tests of pre-mixture of methane and air in constant volume combustion chamber(CVCC) have been carried out by means of flame propagation photo and gas pressure measurement,the effects of CVCC body temperature,intake pressure of pre-mixture of methane and air,equivalence ratio and location of the built-in adaptor have been investigated.The whole combustion chamber can be divided into two parts,i.e.the upper combustion chamber and the lower combustion chamber,by the built-in adaptor with through hol...     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

实验动物在血液制品中的应用

目的：阐述实验动物在血液制品生产质量控制过程中应用的重要性。方法：按《中华人民共和国药典》2005年版三部要求及相关项目的技术规范进行血液制品质量控制。结果：血浆数量150吨,可同时生产以下品种的产品,人血白蛋白共30批次,总瓶数约40万瓶（折10g）;免疫球蛋白类：共30批次,总瓶数约30万瓶（折2.5g）;人纤维蛋白原：共30批次,总瓶数约15万瓶（折0.5g）;人凝血酶原复合物：共30批次,总瓶数约12万瓶（折300IU）;人凝血因子Ⅷ：共30批次,总瓶数约10万瓶（折200IU）。需使用家兔870只、豚鼠300只小鼠750只。结论：实验动物应用于血液制品生产质量控制发挥了非常重要的作用。