高炉鼓风机就地扩容改造方案及经济效益

介绍了利用高炉鼓风机基础实施不易地扩容改造的设计工艺方法，该方法不仅降低了设计、施工、安装费用，而且缩短了施工周期，降低了固定资产投资。     

脉冲激光沉积SrBi2Ta2O9铁电薄膜电容特性研究

用ＰＬＤ方法成功地制备了ＳＢＴ铁电薄膜，并制作成Ｐｔ／ＳＢＴ／Ｐｔ薄膜电容器。ＳＢＴ薄膜的晶面取向以（００８）和（１１５）为主。在５Ｖ电压下，极化反转，并且得到较饱和的电滞回线，剩余极化强度和矫顽电场分别为８４μＣ／ｃｍ２和５７ｋｖ／ｃｍ。ＩＶ特性测试显示两个对称的双稳峰，并得到零电压下，面积为３１４×１０４μｍ２，厚度为０３５μｍ的电容器，电容约为５６０ｐＦ，介电常数约为６００。疲劳测试表明Ｐｔ／ＳＢＴ／Ｐｔ具有优良的抗疲劳特性。     

基于距离信息扩展原理的物体识别方法

利用稀疏距离图象与灰度图象相结合，通过射影变换可使灰度图象特征有条件地获取距离信息，这称为 基于射影变换的距离信息扩展原理。利用这些距离信息可计算物体表面平面图形的欧氏空间不变量并对景物中的 物体产生假设。由于初始假设建立在可靠的基础上，并使用了带反馈的混合控制策略，使这种基于模型的物体识别 定位技术具有实用的前景。此文讨论了整个方法的原理及其实施方案，并实验验证了原理的正确性与有效性。     

The “burning ship” and its quasi-Julia sets

By manipulating the imaginary part of the complex-analytic quadratic equation, we obtain, by iteration, a set that we call the “burning ship” because of its appearance. It is an analogue to the Mandelbrot set (M-set). Its nonanalytic “quasi”-Julia sets yield surprizing graphical shapes.     

Turbo Pascal在网络数据库图形处理中的应用

本文介绍用Turbo Pascal 5.0在3~+网上运行的DBASEⅢplus网络数据库中进行图形处理的技术.     

专用集成电路CAT技术的进展

本文简单地回顾了提高VLSI测试效率所采用的一些手段,讨论了在ASIC测试问题研究中出现的一些新观点、新方法、新动向,以及所取得的成果。在此基础上,文章阐明了ASIC测试技术的发展方向,并着重论述了可望在未来得到发展的,针对ASIC的功能测试方法。     

Depth resolution calculations for heavy-ion microbeam RBS analysis

A detailed study has been made on the use of MeV heavy ions (Z₁ = 6–8) for microbeam Rutherford backscattering (RBS) analysis, to improve the depth resolution of this technique. The algorithm for determination of the depth resolution was created and applied to the Zagreb microbeam facility. Theoretical estimates of depth resolution for C and O ion RBS analysis of thin oxide films and semiconductors, using annular silicon surface barrier detector (SSBD), are compared to those for proton backscattering analysis. Depth resolution in certain cases may be improved by increasing the heavy-ion energy. Therefore, by the proper choice of the heavy ion and the heavy-ion energy, the depth resolution may be improved, maintaining the efficiency of the RBS method.     

The optimisation of higher order resampling methods in a multiprocessor environment

The processing of images obtained from satellites often involves highly repetitive calculations on very large amounts of data. This processing is extremely time consuming when these calculations are performed on sequential machines. Parallel computers are well suited to handling computationally expensive operations such as higher order interpolations on large data sets. This paper decribes work undertaken to develop parallel implementations of a set of resampling procedures on an Alliant VFX/4. Each resampling procedure implemented has been optimised in three stages. First, the algorithm has been restructured, where two-dimensional resampling is performed by two one-dimensional resampling operations. Second, each procedure has been reprogrammed in such a way that the autoparallelisation provided by the FX/Fortran compiler has been exploited. Thirdly, data dependent analysis of each procedure has been performed in order to achieve full optimization of each procedure; each procedure has been restructured where appropriate to circumvent vectorisation and concurrency inhibiting data dependencies. The nature and extent of the code optimization achieved for each procedure is presented in this paper. The original code for the most computationally expensive procedure, as targeted at a sequential machine, was found to have an execution time of 4900 seconds on the Alliant VFX/4 when compiled with regular compiler optimization options. Following algorithmic redesigning and reprogramming of the code, as indicated in stage 1 and stage 2, the execution time was reduced to 248 seconds. Restructuring of the code following data dependency analysis indicated in stage 3 in order to avoid data dependencies and allow concurrency and vectorisation, further reduced execution time to 162 seconds. The consequence of this work is that higher-order resampling methods which had not previous been practical are now routinely performed on the Alliant VFX/4 at the University of Dundee.     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。     

Effects of design parameters on geared two-link mechanisms

The design of a specialized agricultural harvesting machine required the use of a path generation mechanism that was compact, accurate, inexpensive to manufacture and difficult attempts involved the use of a cam and follower, but they were expensive to manufacture and difficult to operate. This paper discusses an alternative method of using a coupled, open loop, two-link mechanism to generate a polygon-like closed path (pseudo-polygon) with an integer number of curved sides and apexes. A complete development of the path and path curvaturei equations are presented. The influence of the design variables on the coupler shape (flatness of each side) is shown in equation and design chart form. An example of a successful application of this design method applied to a plant cutting mechanism is presented.