A new efficient method for one‐pot conversions of aryl carboxylic acids into nitriles without solvent

A new efficient method for synthesising nitriles, important organic reagents, is reported in this paper. In an environmentally benign solvent‐free system, aryl carboxylic acids were converted into the corresponding nitriles via one‐pot reactions, by amidation with ethyl carbamate followed by dehydration with thionyl chloride, in excellent yields. The results showed that the method has the advantages of lower cost, higher yield, less pollution and greater ease of work‐up. Copyright © 2008 Society of Chemical Industry     

柴达木盆地断裂系统特征与油气勘探战略方向

基底断裂格局决定了盆地构造演化和沉积发育,导致了北缘、中部和昆北3个各具特色的断裂构造系统。北缘断裂构造系统平面上以反S展布、剖面上以一系列北倾南冲的逆冲断层带及其所控制的同沉积构造呈阶梯向南下掉为特点,受北部祁连山构造应力系统的作用;南部昆北断裂构造系统发育压陷断槽和断阶带,受南部昆仑山构造应力系统的作用;中部断裂构造系统以两断夹一隆的冲起构造为特色,同时受祁连山和昆仑山构造应力的共同作用。断裂对油气藏的形成和分布有重要的控制作用,表现在对烃源岩、储集条件、圈闭形成及油气运聚等方面。依据断裂控烃特征并针对柴达木盆地的具体情况,柴达木盆地油气勘探应迅速转移到盆地腹地即中部断裂构造系统区,尤其是鄂博梁Ⅱ号一伊克雅乌汝、鸭湖—台吉乃尔构造带和中南隆起区,有望取得重大突破。      

石油工程项目管理机制

为了妥善处理石油工程项目中的委托-代理关系,研究了委托-代理模型和石油工程项目管理中的激励约束机制,分析了激励机制、监督机制和选择机制在石油工程项目运行管理中的重要性.只有用有效的契约去激励技术服务公司,才能使服务公司在追求自身效益最大化的同时也为实现石油公司的最大效益而尽最大努力;只有对技术服务公司的作业实施监督,才能形成对技术服务公司的有效约束;采用激励性承包方式、实施综合性评标和组建工程项目动态联盟能够防止逆向选择.分析表明,在最优激励安排下,激励强度与项目面临的不确定性、承包商的边际成本及其风险规避系数负相关,与承包商的边际生产率正相关,还与其他可观测变量相关.在最优监督水平下,作业公司的边际生产率越高,边际成本越低,越容易监督,监督带来的边际收益越高.对于那些监督比较困难的项目,可以通过加强惩罚力度的方式弥补难以有效监督的不足.激励性承包方式可以减小逆向选择造成的危害,组建动态联盟可以进一步加强激励作用,降低道德风险,解决逆向选择问题.参8     

三峡库区滑坡地质力学模型试验技术研究

在三峡库区滑坡地质力学模型试验研究基础上，阐述了滑坡地质力学模型试验的研究现状。指出时间相似比在滑坡模型相似判据研究中须慎重选择；提出以重晶石粉系相似材料能较好模拟软土体滑坡；并介绍了模型相似材料测试中低参数指标测试存在的问题以及模型试验测试技术中的最新进展。     

自适应抗干扰系统在引信中的应用

为了提高无线电引信的抗干扰性能,研究以自适应天线技术为基础的引信抗干扰系统.根据信号与干扰的具体环境,灵活地控制天线的参数,自动调节方向图,使其零点自适应地对准干扰方向,以实现在空间上对信号的最佳接收和对干扰的有效抑制.     

无线局域网的安全解决方案

本文描述了无线局城网中的认证和密钥管理协议,CCMP认证加密协议。IEEE 802.11依赖于IEEE 802.1x 来支持认证和密钥管理服务,更进一步的,四次握手协议用来建立分组传输的数据加密密钥。IEEE 802.11i也定义了认证者更新一个组暂时密钥(GTK)给请求者的组密钥握手,这样请求者可以接收广播消息。     

铁素体球墨铸铁与20钢的闪光对焊

试验使用铁素体球墨铸铁和20钢的实心棒料进行了闪光对焊，通过改变次级电压4～8级，通电时间3～5s，观察其焊接接头组织的变化并测定其抗拉强度。结果表明，接头由三个区组成；当通电时间一定时，抗拉强度随次级电压的升高先减小后增大；当次级电压一定时，抗拉强度随通电时间的增加而增大。在次级电压为8级、通电时间为5s时，抗拉强度达最大值，为370．8MPa，是20钢母材的90.4％，是球墨铸铁母材的83.7％。     

Modeling for local dynamic behaviors of phenol biodegradation in bubble columns

A coupled three-dimensional (3-D) model, combining hydrodynamics with biochemical reactions, was developed to simulate the local transient flow patterns and the dynamic behaviors of cell growth and phenol biodegradation by yeast Candida tropicalis in the bubble-column bioreactor, using the computational fluid dynamic (CFD) method. In order to validate this proposed model effectively, the validation of the local hydrodynamic characteristics of the gas-mineral salt solution (gas-liquid) two-phase system, with the phenol concentration of 1200 mg/L, and with the absence of cells, was performed in a square-sectioned bubble column bioreactor using the LDA system and conductivity probe. Furthermore, the validation of phenol biodegradation behaviors by yeast Candida tropicalis at different initial concentrations of phenol and cell was also carried out in the above bubble-column bioreactor. The results indicated that the model simulations had a satisfying agreement with the experimental data. Finally, the local instantaneous flow and phenol biodegradation features including gas holdup, gas velocity, liquid velocity, cell concentration and phenol concentration inside the bioreactor were successfully predicted in different-scale bubble columns by the proposed model. © 2006 American Institute of Chemical Engineers AIChE J, 2006     

Hydrothermal Reaction Mechanism and Pathway for the Formation of K2Ti6O13 Nanowires

Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K₂Ti₆O₁₃ nanowires (NWs) by a hydrothermal reaction between bulk Na₂Ti₃O₇ crystals and a KOH solution. It is found that direct ion exchange between K⁺ and Na⁺ plus H⁺ interactions with [TiO₆] octahedra in Na₂Ti₃O₇ promote the formation of an intermediate H₂K₂Ti₆O₁₄ phase. The large lattice mismatch between this intermediate phase and the bulk Na₂Ti₃O₇ structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H₂K₂Ti₆O₁₄ NWs. However, these NWs are not stable because of large [TiO₆] octahedra distortion and are subject to a dehydration process, which results in uniform K₂Ti₆O₁₃ NWs with narrowly distributed diameters of around 10 nm.