三维方腔流的混合有限分析解

本文建立了三维对流扩散方程的混合有限分析八点隐格式，并证明了它的基本数学性质。应用原函数法和交错网格技术给出了三维Ｎ—Ｓ方程的混合有限分析解法，计算了雷诺数Ｒｅ＝２０、５０和１００三种情况下的三维方腔内的流场，结果与已有计算成果一致。     

铝在醚类电解质中的电沉积

本文综合了近期有机试剂中电沉积铝的有关文献，主要介绍了铝在ＡｌＣｌ３与乙醚、四氢呋喃（ＴＨＦ）、１－甲基－３乙基咪唑氯化物（ＭＥＩＣ）、Ｎ－（ｎ－丁基）吡啶氯化物（ＢＰＣ）等满替代的翁盐等组成的电解质中，电沉积的电极过程，以及在ＭＥＩＣ和ＢＰＣ中得到的铝层组织和结构的研究成果，并举例了沉积铝层的应用。     

淋病奈瑟菌外膜蛋白Ⅰ的分离提纯及鉴定

在CaCl2存在下，以CTB提取淋球菌的OMP，再以Z3，14萃取PI，然后经DEAESepharoseCl－6B层析柱提纯，获得纯PI10．97毫克。SDS－PAGE显示纯PI为单一蛋白区带，分子量为35KD，经可见光扫描，其纯度达96.21％。用ELISA间接法检测证明，纯PI保持完好的抗原活性。亚类特异性鉴定证实为WI群PIA。     

Control of photoresist properties: a Kalman filter based approach

The photolithography step in the semiconductor manufacturing process becomes increasingly critical as linewidths decrease for the next generation of integrated electronics. It therefore becomes necessary to reduce variations in photoresist parameters such as resist film thickness and photoactive compound concentration during manufacture. In this paper, we present a simple feedback scheme for accurately regulating these parameters. Our approach involves obtaining a simple, static process model the coefficients of which are recursively adjusted based on previous wafer measurements. We use this adaptive model to determine appropriate input setpoints for the next wafer. The effectiveness of this scheme in reducing process drift is exhibited by experimental data. Our results supports the widespread contention that modern feedback control offers the promise of improving the semiconductor manufacturing processes, often with relative ease and minimal capital cost     

Transient Current Behaviour for Iron in 3.5%NaCl and 3.5%NaCl+ 1%NaNO_2 Solutions during Corrosion Fatigue

The transient current behaviour for Iron in 3.5%NaCl and 3.5%NaCl +1%NaNO2 solutions during corrosion fatigue (CF) process has been investigated at different given strain amplitudes and strain rates. The results show that elastic strain has little contribution to material dissolution. The elastic tension strain results in the decrease in the transient current, while the elastic compression strain increases the transient current. Compared to the elastic deformation, plastic deformation affects material dissolution evidently For iron in 3.5%NaCl solution, the strain amplitude plays a dominant role in the dissolution process accelerated by the plastic strain, while in 3.5%NaCl+1%NaNO2 solution, both the strain amplitude and strain rate play an important role in this process. In this paper, the effect of the elastic deformation on the material dissolution and the relation between the tension and compression current peak values under the plastic cycle deformation are discussed     

HIN2xxE系列RS-232收发器的原理及应用

HIN2xxE系列是由＋5V单电源供电的高速RS-232收发电路，符合EIARS-232C和V．28规范，以电源功耗低为显著特点，广泛应用于ISDN和高速调制解调器，尤其是电池供电系统中。文中主要介绍HIN2xxE系列电路的原理、特性和典型应用。     

缝洞型碳酸盐岩油藏水动力学模拟研究

塔河油田缝洞型油藏以溶洞、裂缝为主要储运空间，缝洞非均质性很强，其流体流动机理和含水率变化特征与一般砂岩油藏区别较大。基于管流理论建立了一种新的流动模型，并分别模拟了弹性开发和注水开发时缝洞型定容油藏的开发特征和含水率变化特点。该研究对于认识缝洞型油藏流体流动机理具有一定的借鉴意义。     

VNS反应合成LLM-116

以1,3-二硝基吡唑为原料,经热重排、氨气中和得到3,5-二硝基吡唑铵盐,然后酸化得到3,5-二硝基吡唑。以三甲基肼碘化物（TMHI）作为异常亲核取代氢（VNS）反应试剂,与3,5-二硝基吡唑在叔丁醇钾为催化剂,利用VNS反应合成4-氨基-3,5-二硝基吡唑（LLM-116）。采用红外分析、核磁共振、元素分析等仪器鉴定了其结构,讨论了VNS反应机理及影响因素。通过实验,得出最佳VNS反应试剂为TMHI,反应时间为4h,反应温度为25℃,收率达到60%。     

韶钢热轧宽板厂工艺设备参数的优化

采用卷轧与中板轧制相结合的轧制工艺具有投资省、见效快等优点,对于资金不是很充裕需要采取滚动发展的中小型企业是一种可取之路.韶钢通过与国内外专家的技术交流、技术谈判及优化,在有限的场地上(长620m、宽120 m)布置一套先进、实用的3 450现代宽中厚板(卷)生产线,取得了较好的投资效益.