Comparison of nine common coffee extraction methods: instrumental and sensory analysis

The preparation of a cup of coffee may vary between countries, cultures and individuals. Here, an analysis of nine different extraction methods is presented regarding analytical and sensory aspects for four espressi and five lunghi. This comprised espresso and lungo from a semi-automatic coffee machine, espresso and lungo from a fully automatic coffee machine, espresso from a single-serve capsule system, mocha made with a percolator, lungo prepared with French Press extraction, filter coffee and lungo extracted with a Bayreuth coffee machine. Analytical measurements included headspace analysis with HS SPME GC/MS, acidity (pH), titratable acidity, content of fatty acids, total solids, refractive indices (expressed in °Brix), caffeine and chlorogenic acids content with HPLC. Sensory analysis included visual, aroma, flavor and textural attributes as well as aftersensation. The technical differences in the extraction methods led to a higher concentration of the respective quantities in the espressi than in the lunghi. Regarding the contents per cup of coffee, the lunghi generally had a higher content than the espressi. The extraction efficiency of the respective compounds was mainly driven by their solubility in water. A higher amount of water, as in the extraction of a lungo, generally led to higher extraction efficiency. Comparing analytical data with sensory profiles, the following positive correlations were found total solids ? texture/body, headspace intensity ? aroma intensity, concentrations of caffeine/chlorogenic acids ? bitterness and astringency.     

Shape-Based Retrieval of Construction Site Photographs

Digital photographs of construction site activities are gradually replacing their traditional paper based counterparts. Existing digital imaging technologies in hardware and software make it easy for site engineers to take numerous photographs of “interesting” processes and activities on a daily basis. The resulting photographic data are evidence of the “as-built” project, and can therefore be used in a number of project life cycle tasks. However, the task of retrieving the relevant photographs needed in these tasks is often burdened by the sheer volume of photographs accumulating in project databases over time and the numerous objects present in each photograph. To solve this problem, the writers have recently developed a number of complementary techniques that can automatically classify and retrieve construction site images according to a variety of criteria (materials, time, date, location, etc.). This paper presents a novel complementary technique that can automatically identify linear (i.e., beam, column) and nonlinear (i.e., wall, slab) construction objects within the image content and use that information to enhance the performance of the writers’ existing construction site image retrieval approach.     

Computer aided design algorithm for singly fed circularly polarized rectangular microstrip patch antennas

Based on a resonant cavity model, this work presents an effective computer aided design (CAD) algorithm to design singly fed circularly polarized (CP) rectangular microstrip patch antennas. The CAD algorithm allows precise prediction of the antenna performance. The analysis of radiation pattern, input impedance, and axial ratio parameters confirm the success of the design. The experimental results from a manufactured prototype operating at 2.25 GHz are in good agreement with the CAD predictions. ©1999 John Wiley & Sons, Inc. Int J RF and Microwave CAE 9: 32–41, 1999.     

Ultrastructural Study of Platelet Behavior and Interrelationship in Sprouting and Intussusceptive Angiogenesis during Arterial Intimal Thickening Formation

Platelets in atherosclerosis, bypass stenosis, and restenosis have been extensively assessed. However, a sequential ultrastructural study of platelets in angiogenesis during the early phases of these lesions has received less attention. Our objective was the study of platelets in angiogenesis and vessel regression during intimal thickening (IT) formation, a precursor process of these occlusive vascular diseases. For this purpose, we used an experimental model of rat occluded arteries and procedures for ultrastructural observation. The results show (a) the absence of platelet adhesion in the de-endothelialized occluded arterial segment isolated from the circulation, (b) that intraarterial myriad platelets contributed from neovessels originated by sprouting angiogenesis from the periarterial microvasculature, (c) the association of platelets with blood components (fibrin, neutrophils, macrophages, and eosinophils) and non-polarized endothelial cells (ECs) forming aggregates (spheroids) in the arterial lumen, (d) the establishment of peg-and-socket junctions between platelets and polarized Ecs during intussusceptive angiogenesis originated from the EC aggregates, with the initial formation of IT, and (e) the aggregation of platelets in regressing neovessels (‘transitory paracrine organoid’) and IT increases. In conclusion, in sprouting and intussusceptive angiogenesis and vessel regression during IT formation, we contribute sequential ultrastructural findings on platelet behavior and relationships, which can be the basis for further studies using other procedures.     

Flame-synthesized LaCoO3-supported Pd: 2. Catalytic behavior in the reduction of NO by H2 under lean conditions

A 0.5 wt% Pd/LaCoO₃, prepared by flame-spray pyrolysis (FP), was tested as catalyst for the low-temperature selective reduction of NO by H₂ in the presence of excess O₂. In particular, the effect of the precalcination and prereduction temperature on catalytic activity was compared with that of a similar Pd/LaCoO₃ sample prepared by impregnation with a Pd solution of FP-prepared LaCoO₃. The FP-made catalyst allowed full NO conversion at 150 °C, with 78% selectivity to N₂, thus outperforming the catalytic behavior of the corresponding sample prepared by impregnation. The higher activity of the FP-made catalyst has been attributed to the formation of segregated Co metal particles, not present in the impregnated sample, formed during the precalcination at 800 °C, followed by reduction at 300 °C. Two reaction mechanisms can be deduced from the temperature-programmed experiments. The first of these, occurring at lower temperatures, indicates cooperation between the Pd and Co metal particles, with formation of active nitrates on cobalt, successively reduced by hydrogen spillover from Pd. The second, occurring at higher temperature, allows 50% conversion of NO, with >90% selectivity to N₂, and involves N adatoms formed by dissociative NO adsorption over Pd. Prereduction at 600 °C led to a slight increase in catalytic activity, due to the formation of a PdCo alloy, which is more stable on reoxidization compared with Pd alone. Moreover, the cooperative reaction mechanism seems to be favored by the proximity of Co and Pd in metal particles.     

Automatic on-line monitoring of atmospheric volatile organic compounds: gas chromatography-mass spectrometry and gas chromatography-flame ionization detection as complementary systems

Traditionally air quality networks have been carrying out the continuous, on-line measurement of volatile organic compounds (VOC) in ambient air with GC-FID. In this paper some identification and coelution problems observed while using this technique in long-term measurement campaigns are described. In order to solve these problems a GC-MS was set up and operated simultaneously with a GC-FID for C₂-C₁₁ VOCs measurement.There are few on-line, unattended, long term measurements of atmospheric VOCs performed with GC-MS. In this work such a system has been optimized for that purpose, achieving good repeatability, linearity, and detection limits of the order of the GC-FID ones, even smaller in some cases. VOC quantification has been made by using response factors, which is not frequent in on-line GC-MS. That way, the identification and coelution problems detected in the GC-FID, which may led to reporting erroneous data, could be corrected.The combination of GC-FID and GC-MS as complementary techniques for the measurement of speciated VOCs in ambient air at sub-ppbv levels is proposed. Some results of the measurements are presented, including concentration values for some compounds not found until now on public ambient air VOC databases, which were identified and quantified combining both techniques. Results may also help to correct previously published VOC data with wrongly identified compounds by reprocessing raw chromatographic data.     

Ion beam analysis of partial lithium extraction of LiMn2O4 by chemical delithiation

Lithium manganese oxide, LiMn₂O₄, has been studied by many research groups. This material is a great candidate to be used as positive electrode in rechargeable lithium-ion batteries because of its low cost, abundant precursors and non-toxicity. LiMn₂O₄ has a spinel Fd-3m structure and shows a reversible extraction and insertion of lithium ions that is one of the most important characteristic of positive electrodes in rechargeable batteries.In this work, LiMn₂O₄ samples were synthesized by solid state reaction. A partial lithium removal was performed on this system by chemical delithiation using HCl aqueous solutions at different concentrations. Six partial-extracted compounds were obtained and characterized by Ion beam analysis (IBA) in order to obtain the Li concentrations. X-ray diffraction (XRD) and Rietveld analyses were also performed. A rigorous study of lithium contents is critical to analyze the structure properties of these compounds and samples production parameters. The IBA method used in this work was the analysis of energy spectra of elastic backscattered (EBS) proton from Mn, O and Li nuclei and the α-particles energy from the ⁷Li(p,α)⁴He nuclear reaction (NR).     

CFRP Tendons for the Repair of Posttensioned, Unbonded Concrete Buildings

The deterioration attributable to corrosion of concrete structures reinforced with unbonded, posttensioned tendons is a costly problem. Recent research has shown composite materials such as fiber-reinforced polymers (FRP) to be suitable alternatives to steel because they provide similar strength without susceptibility to electrochemical corrosion. Carbon-FRP (CFRP) in particular has great promise for prestressed applications because it shows resistance to corrosion in environments that might be encountered in concrete and experiences less relaxation than steel. This paper outlines the testing and implementation of a posttensioned system that uses CFRP tendons to replace corroded, unbonded posttensioned steel tendons. This system was then implemented in a parking garage in downtown Toronto. To the writers’ knowledge, this is the first example of an unbonded, posttensioned tendon replacement using FRP tendons. The system used split-wedge anchors designed specifically for CFRP tendons. The dead end was anchored by directly bonding the tendon to the concrete slab. The CFRP tendon was successfully inserted in the opening created by the removal of the corroded tendon and stressed. Although the system was shown to be feasible, the current anchorage configuration results in load losses of up to 60% during the transfer. Changing the orientation of the anchor was found to reduce the load loss to an acceptable range of 1–9%.