On the potential of combining neutron activation analysis and particle induced X-ray emission (PIXE) for micro- and microdistribution analysis of hard metals in human tissues

Tungsten carbide and cobalt are the main components of hard metal alloy while other metals such as chromium, niobium, tantalum, titanium and vanadium are sometimes added in smaller amounts. Exposure to hard metal dusts can induce a lung fibrosis with cobalt playing a major role. In order to provide information on the role that each metal may have in causing this disease, determination of the total content and the distribution of inhaled metals in lung tissue of hard metal workers is of paramount importance. However, samples such as transbronchial biopsy and bronchoalveolar lavage (BAL), often used in the medical diagnosis of pneumoconiosis, only allow for a small amount of material. This calls for sensitive and accurate analytical procedures for microdetermination and distribution of metals in pulmonary tissue and cellular material, such as macrophages. This work proposes a combination of sophisticated analytical techniques such as neutron activation analysis (NAA), currently applied to the determination of the total concentration of more than 30 elements in biological specimens, and PIXE analysis, particularly microPIXE, which has a great potential for microdistribution analysis in small biological samples. Principles and perspectives for the combined use of these techniques for the analysis of human tissue are outlined and discussed. NAA: determination of hard metals in lung tissue are carried out by neutron irradiation (2 × 10¹⁴ neutrons cm⁻² s⁻¹) in the HFR reactor of Petten. After neutron activation, radiochemical separations of ⁶⁰Co, ¹⁸⁷W, ¹⁸²Ta, ⁵¹Cr followed by computer-based high resolution gamma ray spectrometry allow the measurement of these elements in pulmonary tissues with sensitivities ranging from 10⁻⁴ μg (Cr) to 10⁻⁶ μg (W). PIXE: this technique is multielemental and of relatively high sensitivity (μg/g) even in small total sample masses of from 10 to 100 μg, thus allowing the analysis of parts of needle biopsies. Whereas PIXE has been successfully applied to many medical problems, its usefulness is limited in the total samples analysis for cobalt-related hard metal disease, due to the low levels of cobalt in tissue combined with severe element interferences from the generally more abundant metal, iron. Nevertheless, microPIXE, a special variety of the method scanning over the sample with a focussed ion beam of about 2 × 2 μm², could complement the NAA findings in total samples in the sense of achieving a microdistribution analysis of hard metals (including cobalt) in suitable thin tissue sections.The availability of specialized facilities at the JRC such as the powerful HFR reactor (Petten), the NAA laboratories (Ispra) and the microPIXE facility (Geel) could represent a European ‘reference pole’ for the study of metals in tissues of hard metal diseased subjects.     

A contribution to the study of some greek marbles

The use of marble in Architecture began on the 7th century B.C. and continued to be used without stop untill today. Greece and especially the East Macedonia region is an extremely privileged area on marble deposits both in quantities and qualities and colours. In the present work the main physical and engineering properties of some varieties of greek marbles are given and a comparison with the international standards is made. The experimental material (marbles) was from East Macedonia, Argolida-Arcadia and Magnessia, three of the biggest marble deposit areas in Greece. From the results obtained, it is concluded that the marbles examined satisfy all the international standard codes and thus they can be used as building stones and decoration materials.     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Separation of physical loading from photosynthesis/respiration processes in rivers by mass balance

Diurnal variations in physical and chemical concentrations, including nutrients, are observed in river ecosystems. Understanding these cycles and separating the effects of physical loading (from point and non-point sources) and biogeochemical processes are necessary for water management and the TMDL process. A chloride mass balance approach is used to separate the relative influences of physical loading and biogeochemical processes in the Bow River through Calgary, Canada, which has a significant influence on the river water chemistry. Sampling campaigns were conducted in December 2005, when minimal photosynthesis and respiration occur, and in July 2006, when river discharge is high and some photosynthesis and respiration activity is present. Samples in each campaign were collected at point source input and output along the river reach through the city every hour for a 24-hour period, allowing for time of travel. The two wastewater treatment facilities within the city contributed the majority of physical mass loading to the river, with temporal variations in effluent discharge, chloride, and nutrient concentrations. Wastewater effluent chloride to nutrient (as well as other parameter relationships) concentrations also varied diurnally. An hourly chloride mass balance was achieved, within 0.5% (average, S.D.=4.4) for December and 7.7% (average, S.D.=4.2) for July, between estimated cumulative sum values from all inputs and measured values at the river output downgradient of the city, allowing for the investigation of other parameter conservativeness. Some slight diurnal variations associated with photosynthesis and respiration were observed even with limited productivity in the river. Nitrate mass fluxes appeared to be most strongly influenced by photosynthesis and respiration processes, with phosphate being less influenced. Ammonia mass fluxes appeared to be most strongly influenced by wastewater effluent loading. Physical loading can mask or enhance biogeochemical diurnal fluctuations, creating errors in river process interpretations. Chloride was a useful tracer in the mass balance to distinguish between and assist in separating physical loading and biogeochemical processes in the river.     

Chlorine disappearance in sea-water

A series of chlorination studies were carried out on natural and artificial sea-water. It was determined that both the forward and back titration procedures accurately described the two phases of chlorine losses in sea-water: a rapid initial loss followed by a continuous loss at a sharply reduced rate. The order of adding the iodide and buffer reagents was found to be crucial in affecting the rapid initial loss. The initial loss was found to reach a saturation level that varied widely between natural sea-water samples and appeared to be related to a true organic demand. In contrast, the second phase was difficult to explain. Losses continued over 10 day periods and were pronounced in both natural and artificial sea-water containing bromide. In the absence of bromide, long term losses in artificial sea-water were greatly reduced, indicating that the lost applied chlorine was associated with the bromine chemical system in sea-water. The fate of the lost chlorine was not determined and the untitratable halogen compounds must remain suspect as potential biocides.     

Method of Determining Strength and Deformation Characteristics of Soils from Results of Deep Impression of Rod Plates

The possibility of determining strength and deformation characteristics of soils under field conditions using rod plates is discussed. The mutual relationship between these characteristics is established from results of deep impression of these rods.     

Air monitoring network program in Saudi Arabia

The Kingdom of Saudi Arabia has initiated a program to install air quality network stations throughout the country in order to measure concentration of the ambient air pollutants. The site selection of these stations is an important objective to be accomplished and must be done based on scientific and rational work. To accomplish this objective, a modified version of atmospheric transport and dispersion model, known as air resources laboratories - atmospheric transport and dispersion (ARLATAD) model, is used to evaluate long range transport and diffusion of air pollutants from major pollution causing sources such as refineries, open-air burning of associated gases of oil fields and major industries.Hourly meteorological data for a period of three years (from 1977 to 1979) on wind speed, wind direction, pressure, and temperature from 20 synoptic stations in Saudi Arabia is processed and used as model input. In addition to these, meteorological data from three upper air stations is also processed in order to determine base and top of critical inversion heights.Various pollution causing sources are identified within the study area. Air trajectories are drawn with sources as the origins of the trajectories and the dispersion characteristics is studied with distance and time. Based on long term meteorological records, the adversely affected zones are statistically identified for potential station sites.     

Relations of calculated and actual settlement of a thawing foundation bed

Conclusions 1. The dependence of relative compression of thawing soil on pressure is nonlinear, and it is in agreement with views on the nature of deformation of thawing soil. A dominance of natural pressure in the total load on a foundation bed permits one to use the method of unit summation in calculating settlement of nonlinearly deformable soil. Such calculations, as compared with the linear formulas employed in SNiP, give better agreement with actual settlement.2. In calculating settlement of thawing foundation beds, we need differential consideration of soil compressibility with depth, since the combination of genetic features of frozen ground and the increasing natural pressure with depth may create a different inhomogeneity in the foundation bed.Yakutniproalmaz, Mirnyi. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 1, pp. 18–21, January–February, 1975.