Optimal solutions for a dynamic bandwidth allocation scheme in high-speed networks

In this paper, we investigate the problem of determining the optimal bandwidth allocation for a Dynamic Bandwidth Allocation Scheme (DBAS). The objective is to minimize the total amount of bandwidth required to satisfy the Quality of Service (QoS) requirements of all traffic streams. It is shown that when the performance functions satisfy a certain number of conditions, there exists a unique optimal bandwidth allocation such that, for each traffic stream, either its QoS is just satisfied or its QoS is over-satisfied and it is allocated zero bandwidth. Such an allocation is said to be efficient. It is also shown that there exists a unique efficient allocation in the entire feasible region. An iterative algorithm is developed to compute the efficient allocation employing its special properties. Numerical examples are presented to demonstrate how the algorithm works. Future extensions of this work are also discussed.Partially supported by NSERC of Canada through grants OGP14020 and STRIN-200.     

钢中非金属夹杂物显微评级方法的定量化探讨

应用ＩＢＡＳ系列图像分析系统，对建立一套与国家标准ＧＢ１０５６１─８９兼容的钢中非金属夹杂物显微评级方法的自动化和定量化标准作了可行性分析，结果表明建立这套标准是切实可行的。     

正交异性材料在R.Hill屈服准则下平面应力问题的特征场(h>2)

大多数金属材料在承载时产生了各向异性强化的特点,因此,对这一类材料特性的深入研究显得十分必要,正确建立及分析理论模型将对在实际工程中的应用提供很好的理论依据。本文在R.Hill屈服准则下提出了无量纲化的解析应力解,讨论了屈服参数2>h时,正交异性材料平面应力问题的应力场及应力特征场,利用应力微分平衡方程得到了决定特征曲线特征的参数。结果说明特征线一般互不正交。特别地分析了平头冲压边界附近的情况,得到了各应力状态不同区域的应力特征场,应用数值分析的方法对过渡区进行了计算。     

榆树林油田砂岩储层敏感性研究

榆树林油田储层粘土矿物含量较高，各种注入条件和施工条件都会对该储层造成相应的伤害，应采取相应的防护措施，为防止速敏的发生，储层的注水速度应控制在临界流速（1.0mL/min）以下，在油井转注时，可先注入1.09PV的含粘土稳定剂的进行处理，以提高产量或注入量，注入阴离子表面活性剂配置的活性水再注入地层水，不能增加地层水的渗透率，该项试验研究对指导榆树林油田的开发具有重要的意义。     

平面分层介质结构全波分析综述

本文综述了广义谱域导抗法，直线法及直线法的快速算法，全波离散镜象法等主要方法，并对各种方法的特点进行了比较，这些方法可有效地处理平面分层介质结构问题，文中包括作者近期的研究成果。     

Lightpath (wavelength) routing in large WDM networks

We address the problem of efficient circuit switching in wide area optical networks. The solution provided is based on finding optimal routes for lightpaths and the new concept of semilightpaths. A lightpath is a fully optical transmission path, while a semilightpath is a transmission path constructed by chaining together several lightpaths, using wavelength conversion at their junctions. A fast and practical algorithm is presented to optimally route lightpaths and semilightpaths taking into account both the cost of using the wavelengths on links and the cost of wavelength conversion. We prove that the running time of the algorithm is the best possible in the wide class of algorithms allowing linear algebraic operations on weights. This class encompasses all known related practical methods. Additionally, our method works for any physical realization of wavelength conversion, independently whether it is done via optoelectronic conversion or in a fully optical way     

钢纤维混凝土在南钢大道工程中的应用

钢纤维混凝土是一种性能优良的新型复合材料，与普通混凝土相比，其抗拉、抗弯、抗裂及耐磨、耐冲击、耐疲劳等性能都有显著提高，它不仅可使路面厚度减薄，工程缝间距加大，改善路面的使用性能，延长路面使用寿命，而且还可节省工程造价，缩短施工工期。文中结合南钢大道路面工程实际，主要介绍了钢纤维混凝土的施工及质量控制要点。     

Emergy account for biomass resource exploitation by agriculture in China

On the basis of Odum's ecological economic measure of emergy as embodied solar energy, a system account of biomass resource exploitation by agriculture in China 2004 is developed in this paper, which supplements a former study on corresponding long-term historical trends during 1978 to 2000 (Chen et al., 2006. Emergy-based analysis of the Chinese agriculture. Agriculture, Ecosystems and Environment 115, 161–173). The aggregate fluxes and indicators for biomass resource exploitation in China 2004 are calculated and illustrated when compared with those for 2000 to elucidate the latest status of the Chinese agriculture as the exploitation sector for biomass resource. Data sources and algorithm are presented in detail as basic references for related analysis involving the ecological economy of biomass exploitation in agriculture.     

Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.