Microstructure and thermal behavior of Sn-Zn-Ag solders

The microstructure and thermal behavior of the Sn-Zn-Ag solder were investigated for 8.73–9% Zn and 0–3.0% Ag. The scanning electron microscopy (SEM) analysis shows the Ag-Zn compound when the solder contains 0.1% Ag. X-ray diffraction (XRD) analysis results indicate that Ag₅Zn₈ and AgZn₃ become prominent when the Ag content is 0.3% and above. Meanwhile, the Zn-rich phase is refined, and the Zn orientations gradually diminish upon increase in Ag content. The morphology of the Ag-Zn compound varies from nodular to dendrite structure when the Ag content increases. The growth of the Ag-Zn compounds is accompanied by the diminishing of the eutectic structure of the Sn-9Zn solder. Differential scanning calorimetry (DSC) investigation reveals that the solidus temperature of these solders exists at around 198°C. A single, sharp exothermic peak was found for the solders with Ag content less than 0.5%. Liquidus temperatures were identified with the DSC analysis to vary from 206°C to 215°C when the Ag content ranges from 1.0% to 3.0%     

A physically based approach to granular media mechanics: grain-scale experiments,initial results and implications to numerical modeling

It is generally appreciated that the mechanical behavior of granular media depends fundamentally on the interaction of the constituent particles, and that the validity of numerical models of granular media would be greatly improved with knowledge of the grain-scale mechanics. However, most supporting experimental work has been conducted on highly idealized materials, and a limited amount of information exists on grain-scale force–displacement relationships for naturally occurring materials. To address this shortcoming, we are conducting a program that integrates laboratory experiments on grains of naturally occurring aggregate with the discrete element modeling method, with the goal of relating the grain-scale physical and mechanical properties of granular media to bulk behavior. The paper describes the equipment and methods that have been developed to conduct close-loop controlled, grain-scale experiments under monotonic and cyclic loading conditions, and presents results from an initial set of experiments on unbonded grains. The implications of the grain-scale results to the discrete element model are discussed. Discussions center on the applicability of a physically based approach to the mechanics of granular media in general. In light of future exploration missions and the resulting need to predict the mechanical properties of lunar and planetary regoliths, the paper examines the potential usefulness of our physically based approach to the problem of predicting the behavior of the types of materials found in those environments.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Nickel and chromium cycles: Stocks and flows project part IV

Nickel and chromium are essential ingredients in alloys increasingly important for energy-efficient, environmentally friendly modern technology. Quantitative assessment of the flows of these metals through the world economy from resource extraction to final disposal informs resource policy, energy planning, environmental science, and waste management. This article summarizes the worldwide technological cycles of nickel and chromium in 2000. Stainless steel is the major use of these metals, but they serve numerous other special needs, as in superalloys for high-temperature service, as plating materials, and in coinage. Because they are used primarily in alloys, novel recycling issues arise as their use becomes more widespread. “... the great New York and St. Louis double track, nickel plated railroad...” — Norwalk, Ohio, Chronicle 10 March 1881 announces arrival of surveyors for the future Nickel Plate Railway “Later [1911] I formed an alloy of Iron and Chromium, which showed remarkable resistance to rust and tarnish ... [It was] rediscovered by an Englishman named Brearley, in 1914.” —Elwood Haynes to Stephen F. Roberts, 17 January 1925     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Morphologic and morphometric analysis of testis of Pseudis limellum (Cope, 1862) (Anura, Hylidae) during the reproductive cycle in the Pantanal, Brazil

The spermatogenesis of Pseudis limellum, from the Southern Pantanal, Brazil, was studied from July 1995 to May 1996, through histological sections of the testis. The cells could be differentiated as: primary spermatogonia, large cells, generally with bilobed nucleus; secondary spermatogonia, smaller cells, with darker cytoplasm, chromatin of radial form; primary and secondary spermatocytes, differentiated according to the different stages of the nucleus during the successive cells divisions. Furthermore, we observed cells in process of morphologic differentiation: rounded spermatids much smaller, with nucleus containing chromatin in compacting process and cytoplasm reduction; elongated spermatids, generally parallel organized in well defined bundles, with the anterior region directed toward the periphery of the seminiferous tubule and the tail directed toward the lumen. Spermatozoa are free in the lumen of the seminiferous tubule. All the cells are organized as cysts, which are supported by a large amount of Sertoli cells. The spermatogenesis in P. limellum is very similar to that of other anurans, but peculiarities were observed regarding the organization of the germ cells, the great amount of free Sertoli cells in the lumen of testis collected in May, and the long cytoplasmatic extensions of the cells bearing pigments and involving the seminiferous tubule. The diameter of the seminiferous tubule (SD) exhibited an annual mean of 251.79 +/- 37.57 microm. Spermatozoa number by seminiferous tubule (SN) exhibited an annual mean of 306.66 +/- 39.83, also with higher and lower values at each month. Variations in SD and SN were not significantly correlated with climatic variables. In this species, reproduction occurs throughout the year in ponds and flooded areas, despite the seasonal climate of the Pantanal. Although males varied in their annual reproductive activity, they were considered potentially reproductive in all months throughout the year.     

Effects of partial recrystallization on high-cycle fatigue deformation and crack generation of a nitrogen-strengthened 32Mn-7Cr austenitic steel at liquid-nitrogen temperature

To achieve higher fatigue resistance against subsurface crack generation, both the refinement of grain structure and the introduction of mobile dislocations on various slip systems have been shown to be effective in the 32Mn-7Cr austenitic steel. A novel treatment which consisted of cold grooved rolling and partial recrystallization was introduced to modify the microstructure. High-cycle fatigue properties and fatigue-crack generation were investigated for both the solution-treated (ST) and the partially recrystallized (PR) materials at 77 K. The PR material displayed higher fatigue strength than the ST material, especially in the high-cycle regime. No subsurface crack generation was detected for the PR material; however, it appeared in the lower peak stress and/or in the longer-life range for the ST material. Intergranular facets formed a subsurface crack initiation site in the ST material. Since the dislocation structure that developed in the fatigued PR material assisted homogeneous and multidirectional plastic deformation, the localized deformation and/or the stress concentration at the grain boundaries by coplanar arrays were believed to be relieved. Therefore, intergranular cracking due to incompatibility at a grain boundary may disappear.     

Thermal Radiative Properties of Xonotlite Insulation Material

Introduction Xonotlite-type calcium silicate (6CaO?6SiO2?H2O) is synthesized porous insulation material by hydrothermal processing with quartz powder and limestone as the raw material (with CaO/ SiO2≈1:1). Compared with fire- retardant fibre, xonotlite has more excellent insulating performance, such as low thermal conductivity, environment friendly, high intension, and wide applying temperature range, which has been emphasized in recent years by many scholars and widely used in many indu…     

A criterion for atomicity revisited

Concurrent and reactive programs are specified by their behaviours in the presence of a nondeterministic environment. In a natural way, this gives a specification (ARW) of an atomic variable in the style of Abadi and Lamport. Several implementations of atomic variables by lower level primitives are known. A few years ago, we formulated a criterion to prove the correctness of such implementations. The proof of correctness of the criterion itself was based on Lynch’s definition of atomicity by serialization points. Here, this criterion is reformulated as a specification HRW in the formal sense. Simulations from HRW to ARW and vice versa are constructed. These now serve as a constructive proof of correctness of the criterion. Eternity variables are used in the simulation from HRW to ARW. We propose so-called gliding simulations to deal with the problems that appear when occasionally the concrete implementation needs fewer steps than the abstract specification.     

Geotechnical properties of the soft soil in Guangzhou College City

The paper describes some geotechnical properties of the soft soils in Guangzhou College City, China, which are difficult to both sample and test. Laboratory and in situ tests were carried out to assess the physical and mechanical indices of the soils. The data were statistically analyzed and linear regression undertaken such that equations could be developed by which the geotechnical properties of the soft soils can be predicted. The statistical validity of the degree of correlation confirmed that using these equations, the mechanical indices can be estimated from physical indices determined by routine testing.