THE APPARENT VISCOSITY OF SEMI-SOLID AZ91D ALLOY AT STEADY STATE

The rheological behavior of semi-solid AZ91D at steady state is studied using a Couette type viscometer in the present paper. The results show that the apparent viscosity of semi-solid AZ91D at the steady state increases with the solid fraction increasing, and goes up sharply when the solid fraction reaches a certain value, which is called critical fraction. In addition, the apparent viscosity of semi-solid AZ91D at the steady state takes on a distinct downtrend with the shearing rate increasing, which indicates a strong shear thinning property. In addition, the critical solid fraction becomes higher under larger shearing rate, owing to the more globular shape of the solid particles. Based on the present experiment results, an empirical equation is built as that, relating the steady state apparent viscosity of semi-solid AZ91D with the solid fraction fs andshearing rate (?) at the same time: ηapp=10.74exp(6.95fs)(?)-0.86.     

较小半径溢洪弯道急流超高的研究

为了探求急流弯道的超高及其相关的影响因素,通过对较小半径弯道急流的水流现象的描述,指出较小半径弯道凹岸水流受惯性离心力和冲击力的共同作用。在此基础上,利用动量原理,推导出了较小半径弯道水流超高公式,与试验资料对比,该理论的合理性得到了证实。还讨论了弯道水流各因素同超高的关系,结果表明,弯道的超高和宽度几乎成正比,弯道的转角影响超高很大,当弯道半径越小,其超高将增加越快。     

High-performance Multicrystalline Silicon Ingots Assisted by Recycled Multicrystalline Silicon Block Tailing as Seeds

Silicon - Nowadays, casted multicrystalline silicon is the most important material in photovoltaic industry. In order to reduce the cost of silicon ingots, the recycle of silicon ingot tailings is...     

10 kV变频器在输油站离心泵电机控制的应用

为了验证异步电机变频调速在输油站应用的实际应用效果,进行了变频调速泵(离心泵)的工作特性分析、运动流体的能量分析和电机功率因数的分析。然后,对某输油站串联安装且同时运行的变频离心泵和非变频(工频)离心泵近一年的运行数据进行分析验证。理论分析和数据统计分析的结果一致。结果表明异步电动机变频调速(降频)运行后,节能效果显著,且输油管道压力调节范围更大,提高了电机的功率因数。     

CFRP与金属结合件盐雾腐蚀试验研究

采用中性盐雾、乙酸盐雾、铜加速乙酸盐雾3种电化学方法研究碳纤维/环氧复合材料与CR4级冷轧钢板的电偶腐蚀行为.比较了CR4级冷轧钢板与碳纤维复合材料紧固件构成偶对时3种盐雾腐蚀试验的电偶腐蚀性能.结果表明在NaCl电解质溶液体系中电偶腐蚀作用对CFRP影响不大,CFRP基本没有受到腐蚀.     

In Vitro Characterization of Neutralizing Hen Antibodies to Coxsackievirus A16

Coxsackievirus A16 (CA16) is one of the major causative agents of hand, foot, and mouth disease (HFMD). Children aged <5 years are the most affected by CA16 HFMD globally. Although clinical symptoms of CA16 infections are usually mild, severe complications, such as aseptic meningitis or even death, have been recorded. Currently, no vaccine or antiviral therapy for CA16 infection exists. Single-chain variable fragment (scFv) antibodies significantly inhibit viral infection and could be a potential treatment for controlling the infection. In this study, scFv phage display libraries were constructed from splenocytes of a laying hen immunized with CA16-infected lysate. The pComb3X vector containing the scFv genes was introduced into ER2738 Escherichia coli and rescued by helper phages to express scFv molecules. After screening with five cycles of bio-panning, an effective scFv antibody showing favorable binding activity to proteins in CA16-infected lysate on ELISA plates was selected. Importantly, the selected scFv clone showed a neutralizing capability against the CA16 virus and cross-reacted with viral proteins in EV71-infected lysate. Intriguingly, polyclonal IgY antibody not only showed binding specificity against proteins in CA16-infected lysate but also showed significant neutralization activities. Nevertheless, IgY-binding protein did not cross-react with proteins in EV71-infected lysate. These results suggest that the IgY- and scFv-binding protein antibodies provide protection against CA16 viral infection in in vitro assays and may be potential candidates for treating CA16 infection in vulnerable young children.     

大型自动埋弧焊成套设备的研究

本文介绍了一种结构新颖的埋弧焊成套设备,并就埋弧焊成套设备中的一些主要部件作了分析说明。该设备采用的平移式横梁结构、三点式九滚轮导轨装置以及焊缝自动跟踪装置,对满足同平面内多道长焊缝的焊接有独到之处。     

4Cr14Ni14W2Mo钢排气阀离子氮化和离子软氮化渗层的分析和探讨

研究了经不同加热温度鍛造、固溶和750℃时效后钢的晶粒度、孪晶、滑移及碳化物的分布;用光镜、扫描电镜、X-射线衍射仪、俄歇谱仪对钢的基体组织、渗层组织、剥落形貌、应力状态及渗层C、N分布分析表;合适的固溶处理是可以消除过热锻造危害的;离子软氮化中,碳并没有渗入;适当降低炉气中氮含量和辉光电流密度及适当提高氮化温度是消除氮化产生剥落的途径之一。     

印刷线路板电镀废水综合治理

简述线路板电镀废水中氰、铜氨、油墨废水治理方法和混合废水综合治理工艺流程及原理。     

原位TiB2颗粒增强铝基复合材料及其力学性能

对原位反应合成TiB2／A356铝基复合材料微观组织和力学拉伸性能进行了研究。结果表明，原位反应生成的颗粒增强相在复合材料基体中分布均匀，基体与颗粒间的界面洁净。复合材料强度随着颗粒含量的增加显著提高，与基体合金相比，TiB2质量分数为8％的TiB2／A356复合材料强度和弹性模量的提高幅度约为28％，TiB2质量分数为16％的TiB2／A356复合材料强度和弹性模量的提高幅度约为35％。复合材料的断裂主要是由于基体与颗粒界面脱粘，在拉伸应力作用下由此萌生微裂纹并扩展，导致界面处的基体撕裂，从而降低复合材料塑性。