IFR-2000阻燃聚丙烯热性能研究

研究了用无卤膨胀型阻燃剂IFR-2000作阻燃剂的阻燃聚丙烯的热性能和阻燃性能。     

电磁屏蔽涂料的发展现状及趋势

电子产品的日益普及使得电磁干扰成为一个突出问题,应用电磁屏蔽涂料是消除电磁干扰简单而有效的方法,本文介绍了电磁屏蔽涂料的组成、效能评价方法、技术思想、存在的问题以及发展趋势。复合型以及水性屏蔽涂料具有广阔的研发前景,高效能、宽频带、寿命长的电磁屏蔽涂料将会受到市场欢迎。     

石粉与粉煤灰复合作水泥混凝土掺合料的性能研究

石粉为石材加工过程中产生的废料，但其可与燃煤电厂排放的粉煤灰复合作水泥混凝土的掺合料。研究结果表明：石粉按一定掺量与粉煤灰复合后掺入水泥混凝土中，其强度、抗渗透性和抗钢筋锈蚀性均比单掺粉煤灰混凝土的有所提高，其中以6％和9％的石粉掺量与粉煤灰复合掺入混凝土中的性能为最好。     

Co－Mo／MgO－Al_2O_3一氧化碳耐硫变换催化剂失活原因的探讨

采用程序升温硫化（ＴＰＳ）技术，微反—色谱法（ＭＲＣ）、扫描电镜、透射电镜和其它分析测试手段，对工业应用前后的Ｃｏ－Ｍｏ系耐硫变换催化剂Ｋ８－１１进行了分析，从而对其失活原因进行了分析和讨论     

MAH接枝EPDM增韧PA66的研究

研究了MAH(马来酸酐)接枝三元乙丙橡胶(EPDM—g-MAH)对尼龙66(PA66)的增韧作用。利用SEM(扫描电镜)观察了共混体系的微观形貌(形态结构)，并运用小角激光散射(SALS)方法研究了EPDM的加入对PA66结晶性能的影响。结果表明，未接枝的EPDM与PA66的相容性很差，而EPDM—g—MAH与PA66相容性明显增加，EPDM-g—MAH粒子均匀分散在PA66中，共混体系力学性能有很大提高。随着EPDM—g—MAH用量的增加，PA66球晶尺寸变小，共混体系界面结合更加紧密。     

高耐蚀性Zn—Co合金镀层钝化工艺的研究

研究了电镀Zn-Co合金镀层的钝化液的组成及工艺条件，溶液各成分及工艺条件对钝化膜质量的影响，通过几种腐蚀试验方法，测量了钝化膜的耐蚀性，结果表明，研究的钝化工艺可以得到耐蚀性良好的钝化膜。     

微生物脱砷预处理难冶含砷金矿提金的研究

用化能自养的氧化铁硫杆菌和氧化硫硫杆菌，对河北半壁山含砷金精矿进行了公斤级的预处理氧化脱砷实验．在细菌预处理反应器中的连续和批式脱砷实验表明，目前选育的菌种是有效的．严格控制工艺条件，可以在4天左右便脱砷率高于80％．后续氰化提金实验证实，金的总回收率可达90％以上．用微生物脱砷预处理难冶含砷金矿有金浸出率高、便于固定浸出的砷、免除对环境污染的优点，是有很好应用前景的处理难冶含砷金矿的技术路线．     

Augment low-field intra-operative MRI with preoperative MRI using a hybrid non-rigid registration method

Background

Preoperatively acquired diffusion tensor image (DTI) and blood oxygen level dependent (BOLD) have been proved to be effective in providing more anatomical and functional information; however, the brain deformation induced by brain shift and tumor resection severely impairs the correspondence between the image space and the patient space in image-guided neurosurgery.

Method

To address the brain deformation, we developed a hybrid non-rigid registration method to register high-field preoperative MRI with low-field intra-operative MRI in order to recover the deformation induced by brain shift and tumor resection. The registered DTI and BOLD are fused with low-field intra-operative MRI for image-guided neurosurgery.

Results

The proposed hybrid registration method was evaluated by comparing the landmarks predicted by the hybrid registration method with the landmarks identified in the low-field intra-operative MRI for 10 patients. The prediction error of the hybrid method is 1.92 ± 0.54 mm, and the compensation accuracy is 74.3 ± 5.0%. Compared to the landmarks far from the resection region, those near the resection region demonstrated a higher compensation accuracy (P-value = .003) although these landmarks had larger initial displacements.

Conclusions

The proposed hybrid registration method is able to bring preoperatively acquired BOLD and DTI into the operating room and compensate for the deformation to augment low-field intra-operative MRI with rich anatomical and functional information.     

一种基于ARM的集中器的硬件实现

介绍了一种以ARM9为核心,以Windows CE5.0为操作系统的集中器。它符合国家电网的Q/GDW 374.2-2009技术标准,可以在国家电网中使用。给出了集中器的系统框图,介绍了集中器的主要实现电路,论述了其主要工作原理。     

Automatic inpainting by removing fence-like structures in RGBD images

Recent inpainting techniques usually require human interactions which are labor intensive and dependent on the user experiences. In this paper, we introduce an automatic inpainting technique to remove undesired fence-like structures from images. Specifically, the proposed technique works on the RGBD images which have recently become cheaper and easier to obtain using the Microsoft Kinect. The basic idea is to segment and remove the undesired fence-like structures by using both depth and color information, and then adapt an existing inpainting algorithm to fill the holes resulting from the structure removal. We found that it is difficult to achieve a satisfactory segmentation of such structures by only using the depth channel. In this paper, we use the depth information to help identify a set of foreground and background strokes, with which we apply a graph-cut algorithm on the color channels to obtain a more accurate segmentation for inpainting. We demonstrate the effectiveness of the proposed technique by experiments on a set of Kinect images.