Processing and properties of 0.65Pb(Mg1/3Nb2/3)O3–0.35PbTiO3 thick films

We have investigated the processing of 0.65Pb(Mg_1/3Nb_2/3)O₃–0.35PbTiO₃ (PMN–PT) thick films on platinised alumina substrates. Nanosized PMN–PT powder with 2 mol% of excess PbO was prepared by high-energy milling and deposited on the substrate using screen-printing technology. The films were then sintered at 950 °C in a PbO-rich atmosphere. The influence of the sintering time and the amount of PbO-containing packing powder was studied and related to the structural, microstructural, dielectric and piezoelectric properties of the film. In order to obtain a homogeneous and dense thick film without any secondary phase, the PMN–PT films had to be sintered in the presence of a PbO-based liquid phase that had to be completely removed from the thick film during the final stage of the sintering. Under optimal sintering conditions we obtained a room temperature relative dielectric permittivity of 3600, dielectric losses of 0.036, a T_m of 174 °C, a permittivity at the T_m of 21,000 and a d₃₃ of 140 pC/N.     

Interaction of Water-Soluble CdTe Quantum Dots with Bovine Serum Albumin

Semiconductor nanoparticles (quantum dots) are promising fluorescent markers, but it is very little known about interaction of quantum dots with biological molecules. In this study, interaction of CdTe quantum dots coated with thioglycolic acid (TGA) with bovine serum albumin was investigated. Steady state spectroscopy, atomic force microscopy, electron microscopy and dynamic light scattering methods were used. It was explored how bovine serum albumin affects stability and spectral properties of quantum dots in aqueous media. CdTe–TGA quantum dots in aqueous solution appeared to be not stable and precipitated. Interaction with bovine serum albumin significantly enhanced stability and photoluminescence quantum yield of quantum dots and prevented quantum dots from aggregating.     

Suitability of some selected maize hybrids from Serbia for the production of bioethanol and dried distillers' grains with solubles

BACKGROUND: Bioethanol is mostly produced from starchy parts of the corn grain kernel leaving significant amounts of valuable by‐products such as dried distillers' grains with solubles (DDGS) which can be used as a substitute for traditional feedstuff. The suitability of six maize hybrids from Serbia was investigated for bioethanol and DDGS production. The correlation between physical and chemical characteristics of the grain, bioethanol yield and quality of the corresponding DDGS was assessed. RESULTS: All hybrids had very different chemical composition and physical characteristics which could allow various applications. The highest bioethanol yield (94.5% of theoretical) and volumetric productivity (2.01 g l^?1 h^?1) were obtained with hybrid ZP 434 and the lowest with ZP 611k. Regarding chemical composition, all DDGS samples manifested good properties as feed components. Their protein content was higher compared to the kernel. In addition, the samples showed high digestibility and high mineral content, especially of calcium and phosphorus. CONCLUSION: A hybrid ZP 434 was selected as the most promising bioethanol producer. This property is attributed to the highest level of soft endosperm which is more susceptible to starch‐hydrolysing enzymes. A high yield potential per hectare makes it the best candidate for commercial bioethanol production. © 2012 Society of Chemical Industry     

Photoelectric properties of MISM phthalocyanine structure

Langmuir-Blodgett films have been prepared from copper tetra-4-t-butylphthalocyanine. A voltage dependence of capacitance can be attributed to the presence of a Schottky depletion layer. The barrier potential was determined as l·4eV, and the carrier concentration about 10²⁴m^?3     

A New and Fast HPLC Method for Determination of Rutin, Troxerutin, Diosmin and Hesperidin in Food Supplements Using Fused-Core Column Technology

A new and fast high-performance liquid chromatography (HPLC) method using fused-core column for separation of rutin, troxerutin, diosmin, and hesperidin has been developed and used for determination of these flavonoids in food supplements. Efficient separation of flavonoids and internal standard methylparaben was achieved on the fused-core column Ascentis Express RP-Amide (100?×?3.0 mm), particle size 2.7 μm, with mobile phase acetonitrile/water solution of acetic acid pH?3 (30:70, v/v) at a flow rate of 1.0 mL?min^?1 and at temperature 50 °C. The detection wavelengths were set at 283 nm for hesperidin and at 255 nm for rutin, troxerutin, diosmin, and internal standard methylparaben. Under the optimal chromatographic conditions, good linearity with correlation coefficients in the range (r?=?0.9991–0.9998; n?=?7) for all flavonoids was achieved. Commercial samples of food supplements were extracted with 100 % dimethyl sulfoxide using ultrasound bath for 10 min and then diluted to methanol. A 5-μL sample volume of the filtered solution was directly injected into the HPLC system. Accuracy of the method defined as a mean recovery of flavonoids from food supplement matrix was in the range 96.2–104.4 % for all flavonoids. The intraday method precision was satisfactory, and relative standard deviations of sample analysis including preparation and determination of different food supplements were in the range 0.5–3.5 % for all flavonoids. The developed method has shown high sample throughput during sample preparation process, modern separation approach, and short time (5 min) of analysis.     

Dense fine-grained biphasic calcium phosphate (BCP) bioceramics designed by two-step sintering

In this study, dense, fine-grained biphasic calcium phosphate bioceramics were designed via the two-step sintering method. The starting powder was nanosized calcium-deficient hydroxyapatite, whose phase composition, average particle size and morphology were characterized by XRD, FTIR, Raman spectroscopy, laser diffraction and FE-SEM. The phase transformations of the initial powder during heating up to 1200 °C were examined using TG/DSC. At first, conventional sintering was performed and the recorded shrinkage/densification data were used to find out the appropriate experimental conditions for two-step sintering. The obtained results show that two-step sintering yields BCP ceramics, consisting of hydroxyapatite and β-TCP, with full dense, homogeneous structure with average grain size of 375 nm. Furthermore, BCP ceramics obtained by the two-step sintering method exhibit improved mechanical properties, compared to conventionally sintered BCP.     

Cell adhesion on modified polyethylene

Polyethylene (PE) was irradiated with 10 and 63 keV Ar⁺ ions to fluences of 1 × 10¹⁷ to 3 × 10¹⁹ m^–2 and then it was grafted with aminoacid (alanine). The changes of surface polarity, electrical conductivity, and oxygen concentration were examined on pristine, as-irradiated, and irradiated-grafted PE. The in vitro adhesion of mice fibroblasts on the modified PE was evaluated 24 hours after inoculation. It was proved that for the PE irradiated at 10 keV ion energy, the presence of chemically bound alanine increases cell adhesion and its homogenity. For PE irradiated with 63 keV ions, however, the alanine grafting leads to a reduction of the number of adhering cells. It was found that a rising surface polarity increases cell adhesion, but when its value is too high the cell adhesion starts to decrease. No correlation between electrical conductivity and cell adhesion was observed. In general, higher cell adhesion is observed on modified PE in comparison with pristine one.     

Material and Energy Interactions between Milling Bodies,Milled Particles,and Milling Environment

Changes in particle size, surface state, and composition brought about by planetary and vibration milling of silicon and quartz in various permittivity liquids were investigated. Using a variety of spectroscopic techniques (IRS, XPS, and Mössbauer spectroscopy) the changes in quality of the superficial layers of milled particles have been determined. During energy-intensive milling, the material being milled intensively interacts with the media and milling environment. The nature of the interaction and quality of the surface shell covering the milled particles depend on the reactivity and hardness of the interacting solids and of the milling environment. During planetary milling of silicon with tungsten carbide media, the superficial layers are formed by silicon suboxides and silicon oxide. The thickness of the superficial layer and the share of SiO₂ increase with increasing permittivity of liquids. Milling with steel media results in a more complicated composition of the superficial layer. According to Mössbauer spectra, the iron is present in two main forms: as a magnetically ordered form identical with basic material of balls and in a paramagnetic form as a product of a mechanically stimulated surface reaction between Si and Fe. The presence of the superficial layers on the milled particles of silicon and quartz markedly influences the values of the specific surface area. This influence should be taken into consideration when calculating the specific contamination of the milled powder.     

Mechanically Induced Cation Redistribution and Spin Canting in Nickel Ferrite

The structural and magnetic evolution in nickel ferrite (NiFe₂O₄) caused by high-energy milling are investigated by Mössbauer spectroscopy. It is found that the nanostructural state of the milled NiFe₂O₄ is characterized by a reduced concentration of iron ions on tetrahedral sites. The degree of inversion in NiFe₂O₄ is calculated from the subspectral area ratio of both high- and zero-field Mössbauer spectra. Several interesting features are involved in the work, e.g., superparamagnetic relaxation, mechanically induced cation redistribution, and spin-canting effect.     

On decentralized stabilization and structure of linear large scale systems

Connective stabilizability of large-scale systems, which are composed of interconnected subsystems, is considered using decentralized feedback. Both analytical and graph-theoretic conditions are derived directly in terms of the interconnection structure, which ensure that stability of the overall closed-loop system is invariant under the structural perturbations caused by disconnections and reconnections of links among the subsystems. The conditions characterize a large class of decentrally stabilizable systems, which includes all classes of connectively stabilizable interconnected systems considered so far.