Polymer-assisted formation of hydrophobized,shape-anisotropic zinc oxide nanoparticles via an inverse emulsion technique

A one-step inverse emulsion process using amphiphilic surface-active copolymers for the synthesis of hydrophobized, shape-anisotropic inorganic nanoparticles is presented. While such structures are normally prepared sequentially by particle formation and hydrophobization, we have combined both reactions. This approach is demonstrated exemplarily with zinc oxide (ZnO) nanoparticles. A key issue is the design of amphiphilic copolymers that act as emulsifiers to enable an aggregate-free redispersion of the particles and to stabilize the inverse emulsion for the precipitation in the droplets. In a first approach, the stabilizing as well as the hydrophobizing property of the copolymers are combined with the ability to control the crystallization in one polymer (structure-directing emulsifier—SDE). In a second approach, a mixture of two polymers is applied: an amphiphilic copolymer for hydrophobizing/stabilizing the inorganic nanoparticles and a polar or double hydrophilic polymer that induces the anisotropic growth of the ZnO nanocrystals (structure-directing agents—SDA). Homopolymers and block copolymers, consisting of phosphonic acid groups or propylene oxide groups, were used as SDAs. Typically, hydrophobized shape-anisotropic particles of up to 600 nm in length and with an aspect ratio of 1:4 were obtained.     

Labortest zur Minimierung des Versuchsaufwandes bei Pilotfiltrationen

Investigating beer filtration using cellulose fibers requires appropriate methods. One aspect is the preparation of large scale trials. Starting from the filterability test according to Raible and based on the results of diverse pilot scale trials, a laboratory test was created. Apparatus, procedure and methods of assessing the results are described. The new test is qualified for reducing time and effort in upper scale trials, especially in case of varying filter aids compositions.     

The inverse problem in granulation modeling—Two different statistical approaches

This article is concerned with parameter estimation for a multidimensional population balance model for granulation. Experimental results were obtained by running a laboratory mixer with sodium carbonate and aqueous polyethylene glycol solutions. Subsequently, a prescan of suitable parameter combinations utilising the experimental results is performed, and a local surrogate model constructed around the best combination. For the actual estimation of the parameters and their uncertainties two different approaches are applied—a projection method and a Bayesian approach. It is found that the model predictions with the parameters obtained through both methods are similar. Furthermore, the uncertainties in the model predictions increase as the experimental uncertainties are increased. Studies of the marginal densities of two‐parameter combinations obtained through the Bayesian approach show a correlation between the collision and breakage rate constant, giving potential hints for further model development. Furthermore, a bimodal distribution of the compaction rate constant is observed. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

An improved assay for the determination of phospholipase C activity

Phospholipases C (PLC, EC 3.1.4.3) are enzymes that specifically hydrolyze the C‐O‐P bond in phospholipids, yielding sn‐1,2(2,3)‐diacylglycerides and the phosphate residue bearing the corresponding headgroup. The biochemical characterization of PLC requires methods for the reliable determination of their activity. Here, an assay is described in which the phosphate residue released by the PLC is cleaved with an alkaline phosphatase. The phosphate formed is then extracted with n‐butanol and quantified as phosphomolybate complex. The applicability of this method is demonstrated for a concentration range from 10 nM to 10 mM for a range of phospholipids bearing different headgroups in an aqueous and a two‐phase system. The method has the additional advantage that the crude enzyme can be used without the need for purification.     

Experimental and numerical investigation of supported rhodium catalysts for partial oxidation of methane in exhaust gas diluted reaction mixtures

The partial oxidation of methane/oxygen mixtures with large exhaust gas dilution (46.3 vol% H₂O and 23.1 vol% CO₂) has been investigated experimentally and numerically over Rh/CeO₂-ZrO₂, Rh/ZrO₂ and Rh/α-Al₂O₃ catalysts. Experiments were carried out in a short-contact-time reactor at 5 bar and included exhaust gas analysis, temperature measurements along the reactor, and catalyst characterization. Additional experiments were performed in an optically accessible channel-flow reactor and involved in situ Raman measurements of major gas-phase species concentrations over the catalyst boundary layer and laser-induced fluorescence (LIF) of formaldehyde. A full elliptic two-dimensional numerical code that included elementary hetero-/homogeneous chemical reaction schemes and relevant heat transfer mechanisms in the solid was used in the simulations. The employed heterogeneous reaction mechanism, including only active Rh sites, reproduced the experiments with good accuracy. The ratio of active to geometrical surface area, deduced from hydrogen chemisorption measurements, was the single model parameter needed to account for the effect of different supports. This indicated that water activation occurring on support sites, resulting in inverse OH spillover from the support to the noble metal sites, could be neglected under the present conditions with high water dilution. An evident relationship between noble metal dispersion and catalytic behavior, in terms of methane conversion and synthesis gas yields, could be established. Both measurements and predictions indicated that an increasing Rh dispersion (in the order Rh/α-Al₂O₃, Rh/ZrO₂, and Rh/CeO₂-ZrO₂) resulted in higher methane conversions, lower surface temperatures, and higher synthesis gas yields.     

A POLE Splice Site Deletion Detected in a Patient with Biclonal CLL and Prostate Cancer: A Case Report

Chronic lymphocytic leukemia (CLL) is considered a clonal B cell malignancy. Sporadically, CLL cases with multiple productive heavy and light-chain rearrangements were detected, thus leading to a bi- or oligoclonal CLL disease with leukemic cells originating either from different B cells or otherwise descending from secondary immunoglobulin rearrangement events. This suggests a potential role of clonal hematopoiesis or germline predisposition in these cases. During the screening of 75 CLL cases for kappa and lambda light-chain rearrangements, we could detect a single case with CLL cells expressing two distinct kappa and lambda light chains paired with two separate immunoglobulin heavy-chain variable regions. Furthermore, this patient also developed a prostate carcinoma. Targeted genome sequencing of highly purified light-chain specific CLL clones from this patient and from the prostate carcinoma revealed the presence of a rare germline polymorphism in the POLE gene. Hence, our data suggest that the detected SNP may predispose for cancer, particularly for CLL.     

Notwendigkeit und Vermarktung von Flexibilitätsoptionen im Energiesystem der Zukunft

Demands on production, distribution and consumption of electrical energy change fundamentally with the energy revolution. Energy purchasing costs for inflexible consumers are rising and proceeds of inflexible producers are sinking. Companies are able to reduce costs by marketing operational flexibility options. This article sets out the need of flexibility in the energy system and the new marketing options. Flexibility potentials within infrastructure plants of a chemical park are analyzed, evaluated regarding marketing and activated in the presented research project FlexChemistry.     

Enhancing the temperature stability of PLA by compounding strategies

The low thermal stability of polylactid acid (PLA) limits its use for various applications such as microwave‐ready dishes or hot beverage packaging. Furthermore, contained items might be damaged by occurring temperature peaks during transport (e.g., shipping container internal temperature exceeds 80°C) or other usage (e.g., car dashboard heated by sun). The aim of this study was the development of a PLA compound with an operating temperature above 100°C. Therefore, different formulations (e.g., stereocomplex of PLLA and PDLA, cross‐linking of PLA or use of commercial additives) were identified and compounds with varying conditions produced and tested regarding their thermal and mechanical properties. The results showed clearly possible routes for improving the thermal properties of PLA. Using such compounds respectively processing routes and additives helps to overcome one of the most significant problems when using PLA. The higher operating temperature of this biopolymer will lead to a wider field of application and will avoid shipping hazards. POLYM. ENG. SCI., 55:2849–2858, 2015. © 2015 Society of Plastics Engineers     

Catalysis of an Essential Step in Vitamin B2 Biosynthesis by a Consortium of Broad Spectrum Hydrolases

An enzyme catalysing the essential dephosphorylation of the riboflavin precursor, 5‐amino‐6‐ribitylamino‐2,4(1H,3H)‐pyrimidinedione 5′‐phosphate ( 6 ), was purified about 800‐fold from a riboflavin‐producing Bacillus subtilis strain, and was assigned as the translation product of the ycsE gene by mass spectrometry. YcsE is a member of the large haloacid dehalogenase (HAD) superfamily. The recombinant protein was expressed in Escherichia coli. It catalyses the hydrolysis of 6 (v_max, 12 μmol mg^?1 min^?1; K_M, 54 μm ) and of FMN (v_max, 25 μmol mg^?1 min^?1; K_M, 135 μm ). A ycsE deletion mutant of B. subtilis was not riboflavin dependent. Two additional proteins (YwtE, YitU) that catalyse the hydrolysis of 6 at appreciable rates were identified by screening 13 putative HAD superfamily members from B. subtilis. The evolutionary processes that have resulted in the handling of an essential step in the biosynthesis of an essential cofactor by a consortium of promiscuous enzymes require further analysis.