Electrical properties at p-ZnSe/metal interfaces

In order to prepare low resistance ohmic contacts to p-ZnSn by the “deposition and annealing (DA)” technique which has been extensively used for GaAs and Si-based devices, formation of a heavily doped layer by the p-ZnSe/metal reaction is required. For p-ZnSe/Ni contacts, Ni and Se reacted preferentially at the ZnSe/Ni interface upon annealing at temperatures higher than 250°C. However, capacitance-voltage measurements showed that the net acceptor concentration (N_A-N_D) close to the p-ZnSe/Ni interface was reduced upon the Ni/ZnSe reaction, resulting in high contact resistance. For p-ZnSe/Au contacts, neither Au/ZnSe reaction nor reduction of the acceptor concentration were observed after annealing at temperatures lower than 300°C. This indicates that although the metal/p-ZnSe reaction is mandatory to prepare a heavily doped layer, the reaction induced an increase in the compensation donors in the p-ZnSe substrate. In order to increase the acceptor concentration in the vicinity of the p-ZnSe/metal interface through diffusion from the contact materials, Li or O which was reported to play the role of an acceptor in ZnSe was deposited with a contact metal and annealed at elevated temperatures. Ni or Ag was selected as the contact metal, because these metals were expected to enhance Li or O doping by reacting with ZnSe. However, the current density-voltage characteristics of the Li(N)/Ni and Ag(O) contacts exhibited rectifying behavior, and the contact resistances increased with increasing annealing temperature. The present results indicated that, even though the acceptor concentration in the p-ZnSe substrate increased by diffusion of the dopants from the contact elements, an increment of the compensation donors was larger than that of the acceptors. The present experiments indicated that preparation of low resistance ohmic contacts by forming a heavily doped intermediate layer between p-ZnSe and metal is extremely difficult by the DA technique.     

Gross periostitis ossificans in mandibular osteomyelitis. Review of the English literature and radiographic variation

BACKGROUND: Although the airway epithelium participates in inflammation and repair, the circadian expression of epithelial cell markers involved in these processes has not been investigated. OBJECTIVE: We sought to determine whether expression of CD51 (vitronectin and fibronectin receptor), CD54 (intercellular adhesion molecule-1), HLA-DR (activation marker), CD29 (beta1 integrin), CD49b (collagen receptor), and CD11b (complement receptor) exhibit a circadian rhythm in asthma. METHODS: Eleven patients with nocturnal asthma (NA), 9 subjects with nonnocturnal asthma (NNA), and 10 control subjects underwent bronchoscopy at 4 PM and 4 AM in a random order 1 week apart, with brushing of the proximal and distal airways. The percentage of cells staining for a particular marker was determined. RESULTS: At 4 PM, HLA-DR in the proximal airways and CD54 in the distal airways was significantly greater in control subjects as compared with asthmatic subjects (HLA-DR, control subjects: 10.0% [range, 5.0% to 21.0%]; NNA: 8.0% [range, 4.0% to 14.5%] NA: 3.5% [range, 2.0% to 6.0%], P = .01; CD54, control subjects: 17.0% [range, 8.0% to 25.0%], NNA: 8.0% [range, 5.3% to 11.5%], NA: 7.0% [range, 4.0% to 15.0%], P = .O;). At 4 AM, CD51 in the distal airways was significantly greater in patients with NA as compared with patients with NNA and control subjects (control subjects, 23.0% [range, 13.8% to 30.5%]; NNA, 32.0% [range, 13.0% to 35.0%]; NA, 40.0% [range, 23.0% to 50.0%], P = .05). Expression of CD51 in the distal airways correlated with the degree of airway obstruction (r = -0.57, P = .001). Control subjects exhibited significant circadian variation in the expression of HLA-DR in the proximal airways and CD54 in the distal airways. CONCLUSION: The increased CD51 at night in patients with NA may be related to increased airway inflammation and repair processes in response to injury. The circadian changes in CD54 and HLA-DR in control subjects require further study to determine their significance. (J Allergy Clin     

Mechanical stretch induces hypertrophic responses in cardiac myocytes of angiotensin II type 1a receptor knockout mice

Many lines of evidence have suggested that angiotensin II (AngII) plays an important role in the development of cardiac hypertrophy through AngII type 1 receptor (AT1). To determine whether AngII is indispensable for the development of mechanical stress-induced cardiac hypertrophy, we examined the activity of mitogen-activated protein kinase (MAPK) family and the expression of the c-fos gene as hypertrophic responses after stretching cultured cardiac myocytes of AT1a knockout (KO) mice. When cardiac myocytes were stretched by 20% for 10 min, extracellular signal-regulated protein kinases (ERKs) were strongly activated in KO cardiomyocytes as well as wild type (WT) myocytes. Both basal and stimulated levels of ERKs were higher in cardiomyocytes of KO mice than in those of WT mice. Activation of another member of the MAPK family, p38(MAPK), and expression of the c-fos gene were also induced by stretching cardiac myocytes of both types of mice. An AT1 antagonist attenuated stretch-induced activation of ERKs in WT cardiomyocytes but not in KO cardiomyocytes. Down-regulation of protein kinase C inhibited stretch-induced ERK activation in WT cardiomyocytes, whereas a broad spectrum tyrosine kinase inhibitor (genistein) and selective inhibitors of epidermal growth factor receptor (tyrphostin, AG1478, and B42) suppressed stretch-induced activation of ERKs in KO cardiac myocytes. Epidermal growth factor receptor was phosphorylated at tyrosine residues by stretching cardiac myocytes of KO mice. These results suggest that mechanical stretch could evoke hypertrophic responses in cardiac myocytes that lack the AT1 signaling pathway possibly through tyrosine kinase activation.     

On approximate solutions for the deformation of plane anisotropic beams

Plane deformation of anisotropic beams with narrow rectangular cross sections exhibits coupling of stretching, bending and transverse shearing. For anisotropic cantilever beams with a stiff end-cap under end forces and an end couple, assessments were made for approximate solutions by comparing these with numerically exact finite element (FE) solutions. Specific attention is given to point-wise or approximate satisfaction of the end-fixity conditions. As approximate methodologies, (i) the elementary polynomial form of Airy's stress function for the plane stress problem in a rectangular region, (ii) a Timoshenko-type beam theory, and (iii) the Bernoulli-Euler beam theory were selected. Among these, only the polynomial form of Airy's stress function violates the point-wise end-fixity conditions. Both the polynomial Airy stress function and the Timoshenko-type beam theory successfully model the effects of transverse shear deformation and the coupling of stretching and transverse deflection. Analytical solutions demonstrate that the normal shear coupling effect increases linearly with the thickness-to-span ratios in axial normal stress and axial displacement, while the coupling manifests quadratically in transverse displacement. The comparison of end displacements with the numerically exact FE solutions indicates that the polynomial form of Airy's stress function is no better than the Timoshenko-type beam theory. Similar conclusions were reached for the problem of uniformly loaded cantilever beams. It has been found that the accurate prediction of the deformation of thick anisotropic beams with significant normal-shear coupling requires the use of higher order theories.     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Preparation of zirconia-toughened bioactive glass-ceramics

Bioactive glass-ceramics toughened by tetragonal zirconia polycrystal (TZP) were prepared by hot-pressing mixed powders of the MgO-CaO-P₂O₅-SiO₂ glass and TZP containing 20 to 80% alumina. The bending strength and the fracture toughness of the composite materials were improved compared with those of the material without TZP. These composites showed high bending strengths (400 to 500MPa) and high fracture toughness ( 2.8MPa m^1/2). The existence of a crack deflection mechanism was observed by scanning electron microscopy. After soaking in simulated physiological solution at 100 °C, no phase transformation from tetragonal to monoclinic of TZP in the composites and no degradation in bending strength occurred.