Quantifying unfrozen water in frozen soil by high-field 2H NMR

To understand wintertime controls of biogeochemical processes in high latitude soils it is essential to distinguish between direct temperature effects and the effects of changes in water availability mediated by freezing. Efforts to separate these controls are hampered by a lack of adequate methods to determine the proportion of unfrozen water. In this study we present a high-field 2H2O NMR method for quantifying unfrozen water content in frozen soil. The experimental material consisted of the humic layer of a boreal spruce forest soil mixed with varying proportions of quartz sand and humidified with deuterium-enriched water. The relative standard deviation of unfrozen water content (measured as NMR signal integral) was less than 2% for repeated measurements on a given sample and 3.5% among all samples, based on a total of 16 measurements. As compared to 1H NMR, this 2H NMR method was found to be superior for several reasons: it is less sensitive to field inhomogeneity and paramagnetic impurities, it gives a bigger line shape difference between the ice and liquid signal, it shows a sharper response to water fusion, and it excludes the possibility of hydrogen in the organic material interfering with the measurement.     

Equilibrium Studies of the System'(Fe,Co)O'–(Fe,Co)3O4 by Solid-State emf Measurements in the Temperature Range 970 to 1370 K

The equilibrium reaction 3'(Fe, Co)O'( ss ) +1/2O₂ ( g ) ⇄ (Fe, Co)₃O₄( ss ) was studied in the temperature range 970 to 1370 K for seven different total compositions of molar ratios 0.5 < Fe/(Fe + Co) ≤ 1.0. The equilibrium pressures of oxygen were determined by using galvanic cells incorporating calcia stabilized zirconia as solid electrolyte and the Fe/Co ratios in the solid-solution phases by wavelength dispersive spectrometry microprobe analyses. The activities of 'FeO' in the cobaltowüstite phase were then derived from the experimental results obtained.     

A new reaction of unsaturated fatty acid hydroperoxides: Formation of 11-hydroxy-12,13-epoxy-9-octadecenoic acid from 13-hydroperoxy-9,11-octadecadienoic acid

One of the main compounds formed from 13L-hydroperoxy-9cis,11trans-octadecadienoic acid anaerobically at 100 C in aqueous ethanol was found to bethreo-11-hydroxy-12,13-epoxy-9-octadecenoic acid. The major part (ca. 90%) of this compound was formed from the fatty acid hydroperoxide in a reaction involvingcis-addition to the Δ¹¹ double bond of the proximally linked hydroperoxide oxygen and hydroxyl ion or hydroxyl radical from the solvent. A small part (ca. 10%) was formed bycis-addition of the two hydroperoxide oxygens to the Δ¹¹ double bond. 11-Hydroxy-12,13-epoxy-9-octadecenoic acid and its isomer, tentatively identified as 11-hydroxy-9,10-epoxy-12-octadecenoic acid, also were isolated from a sample of autoxidized linoleic acid.     

Transformation of fatty acid hydroperoxides by alkali and characterization of products

It has previously been determined that (13S,9Z,11E)-13-hydroperoxy-9,11-octadecadienoic acid was mainly converted into (13S,9Z,11E)-13-hydroxy-9,11-octadecadienoic acid by 5 N KHO with preservation of the stereochemistry of the reactant [Simpson, T.D., and Gardner, H.W. (1993)Lipids 28, 325–330]. In addition, about 20–25% of the reactant was converted into several unknown by-products. In the present work it was confirmed that the stereochemistry was conserved during the hydroperoxy-diene to hydroxydiene transformation, but also, novel by-products were identified. It was found that after only 40 min reaction (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid accumulated to as much as 7% of the total. Later, (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid began to disappear, and several other compounds continued to increase in yield. Two of these compounds, 2-butyl-3,5-tetradecadienedioic acid and 2-butyl-4-hydroxy-5-tetradecenedioic acid, were shown to originate from (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid, and they accumulated up to 2–3% each after 4 to 6 h. Some other lesser products included 11-hydroxy-9,12-heptadecadienoic acid, 3-hydroxy-4-tridecenedioic acid, 13-oxo-9,11-octadecadienoic acid and 12,13-epoxy-11-hydroxy-9-octadecenoic acid. Except for the latter two, most or all of the compounds could have originated from Favorskii rearrangement of the early product, (9Z)-13-oxo-trans-11,12-epoxy-9-octadecenoic acid, through a cyclopropanone intermediate.     

Biosynthesis of Jasmonates from Linoleic Acid by the Fungus Fusarium oxysporum. Evidence for a Novel Allene Oxide Cyclase

Fusarium oxysporum f. sp. tulipae (FOT) secretes (+)-7-iso-jasmonoyl-(S)-isoleucine ((+)-JA-Ile) to the growth medium together with about 10 times less 9,10-dihydro-(+)-7-iso-JA-Ile. Plants and fungi form (+)-JA-Ile from 18:3n-3 via 12-oxophytodienoic acid (12-OPDA), which is formed sequentially by 13S-lipoxygenase, allene oxide synthase (AOS), and allene oxide cyclase (AOC). Plant AOC does not accept linoleic acid (18:2n-6)-derived allene oxides and dihydrojasmonates are not commonly found in plants. This raises the question whether 18:2n-6 serves as the precursor of 9,10-dihydro-JA-Ile in Fusarium, or whether the latter arises by a putative reductase activity operating on the n-3 double bond of (+)-JA-Ile or one of its precursors. Incubation of pentadeuterated (d₅) 18:3n-3 with mycelia led to the formation of d₅-(+)-JA-Ile whereas d₅-9,10-dihydro-JA-Ile was not detectable. In contrast, d₅-9,10-dihydro-(+)-JA-Ile was produced following incubation of [17,17,18,18,18-²H₅]linoleic acid (d₅-18:2n-6). Furthermore, 9(S),13(S)-12-oxophytoenoic acid, the 15,16-dihydro analog of 12-OPDA, was formed upon incubation of unlabeled or d₅-18:2n-6. Appearance of the α-ketol, 12-oxo-13-hydroxy-9-octadecenoic acid following incubation of unlabeled or [¹³C₁₈]-labeled 13(S)-hydroperoxy-9(Z),11(E)-octadecadienoic acid confirmed the involvement of AOS and the biosynthesis of the allene oxide 12,13(S)-epoxy-9,11-octadecadienoic acid. The lack of conversion of this allene oxide by AOC in higher plants necessitates the conclusion that the fungal AOC is distinct from the corresponding plant enzyme.     

Survey and comparison of message authentication solutions on wireless sensor networks

Security is an important concern in any modern network. This also applies to Wireless Sensor Networks (WSNs), especially those used in applications that monitor sensitive information (e.g., health care applications). However, the highly constrained nature of sensors imposes a difficult challenge: their reduced availability of memory, processing power and energy hinders the deployment of many modern cryptographic algorithms considered secure. For this reason, the choice of the most memory-, processing- and energy-efficient security solutions is of vital importance in WSNs. To date, a number of extensive analyses comparing different encryption algorithms and key management schemes have been developed, while very little attention has been given to message authentication solutions. In this paper, aiming to close this gap, we identify cipher-based Message Authentication Codes (MACs) and Authenticated Encryption with Associated Data (AEAD) schemes suitable for WSNs and then evaluate their features and performance on a real platform (TelosB). As a result of this analysis, we identify the recommended choices depending on the characteristics of the target network and available hardware.     

Thermomechanical properties of copper–carbon nanofibre composites prepared by spark plasma sintering and hot pressing

Several types of carbon nanofibres (CNF) were coated with a uniform and dense copper layer by electroless copper deposition. The coated fibres were then sintered by two different methods, spark plasma sintering (SPS) and hot pressing (HP). The Cu coating thickness was varied so that different volume fraction of fibres was achieved in the produced composites. In some cases, the CNF were pre-coated with Cr for the improvement the Cu adhesion on CNF. The results show that the dispersion of the CNF into the Cu matrix is independent of the sintering method used. On the contrary, the dispersion is directly related to the efficiency of the Cu coating, which is tightly connected to the CNF type. Overall, strong variations of the thermal conductivity (TC) of the composites were observed (20–200 W/mK) as a function of CNF type, CNF volume fraction and Cr content, while the coefficient of thermal expansion (CTE) in all cases was found to be considerably lower than Cu (9.9–11.3 ppm/K). The results show a good potential for SPS to be used to process this type of materials, since the SPS samples show better properties than HP samples even though they have a higher porosity, in applications where moderate TC and low CTE are required.     

Phase-based multidimensional volume registration

We present a method for accurate image registration and motion compensation in multidimensional signals, such as two-dimensional (2-D) X-ray images and three-dimensional (3-D) computed tomography/magnetic resonance imaging volumes. The method is based on phase from quadrature filters, which makes it robust to noise and temporal intensity variations. The method is equally applicable to signals of two, three or higher number of dimensions. We use parametric models, e.g., affine models, finite elements or local affine models with global regularization. Experimental results show high accuracy for 2-D and 3-D motion compensation.     

Snowmobile fatalities aspects on preventive measures from a 25-year review

During October 1973 through May 1998, 157 snowmobile fatalities were autopsied in Northern Sweden, including 131 riders, 15 passengers, six occupants with unknown position and five victims pulled by a snowmobile. Most fatalities occurred during March and April (41%), on weekends/holidays (75%), between 18:00 and 02:00 h (59%), during darkness (63%), in clear weather (84%) and at leisure time (94%). The median age was 39 years and 92% were men. The most common causes of death were blunt trauma (53%) and drowning (38%). A total of 64% were inebriated by alcohol, with a mean blood alcohol concentration of 1.7 g/l. More inebriated victims were found during weekends/holidays than on weekdays (75 vs. 51%) and during nighttime than during daytime (92 vs. 52). Driving into water was the most common event (38%) followed by collisions with immobile objects (20%). Alcohol and speeding were the most common contributors to the crashes, while flotation snowmobile suit and helmet use were considered to be the most important injury prevention factors.     

Biosynthesis of new divinyl ether oxylipins in Ranunculus plants

[1-¹⁴C]Linolenic acid was incubated with homogenates of leaves from the aquatic plants Ranunculus lingua (greater spearwort) or R. peltatus (pond water-crowfoot). Analysis by reversed-phase high-performance liquid radiochromatography demonstrated the formation of a new divinyl ether FA, i.e., 12-[1′(E), 3′(Z)-hexadienyloxy]-9(Z), 11(Z)-dodecadienoic acid [11(Z)-etherolenic acid] as well as a smaller proportion of ω5(Z)-etherolenic acid previously identified in terrestrial Ranunculus plants. The same divinyl ethers were formed upon incubation of 13(S)-hydroperoxy-9(Z), 11(E), 15(Z)-octadecatrienoic acid, a lipoxygenase metabolite of linolenic acid, whereas the isomeric hydroperoxide, 9(S)-hydroperoxy-10(E), 12(Z), 15(Z)-octadecatrienoic acid, was not converted into divinyl ethers in R. lingua or R. peltatus. Incubation of [1-¹⁴C]linoleic acid or 13(S)-hydroperoxy-9(Z), 11(E)-octadecadienoic acid produced the divinyl ether 12-[1′(E)-hexenyloxy]-9(Z), 11(Z)-dodecadienoic acid [11(Z)-etheroleic acid] and a smaller amount of ω5(Z)-etheroleic acid. The experiments demonstrated the existence in R. lingua and R. peltatus of a divinyl ether synthase distinct from those previously encountered in higher plants and algae.