Acrylic‐based nanocomposite resins for coating applications

Acrylic‐based nanocomposite resins have been investigated in view of future application in water borne automotive coatings by the aid of postemulsification processes. Mechanical, flow and leveling properties of the nanocomposite resins, containing various concentrations of silicate, have been investigated. The results are related to morphological information obtained from TEM and WAXS measurements in the liquid suspension as well as from the cured film. At low silicate loadings, when flow properties are still acceptable for typical emulsification processing, a strong increase in modulus of the cured coating films is observed because of the mainly exfoliated silicate platelets. The rate of increase in modulus of the cured films decreases at higher silicate loadings. Analyzing the mechanical data, using Halpin–Tsai theory indicates that this is due to less perfect exfoliation at higher silicate loading, which is confirmed by TEM analysis. In addition at higher silicate loading, the flow properties of the resin as analyzed by DMA show solid‐like behavior. This can lead to poor film formation in future application. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2146–2156, 2007     

The effects of soluble gas stabilisation on the quality of packed sardine fillets (Sardina pilchardus) stored in air,VP and MAP

Sardine (Sardina pilchardus) is a species that for its abundance assumes great importance in the Portuguese fishing sector. In order to contribute for a better utilisation of this species, the aim of this study was to investigate the effect of the pre‐treatment with soluble gas stabilisation (SGS) (100% CO₂ at 2 bar, during 15 and 30 min) on the quality and shelf‐life of sardine fillets, packed in air (AP), vacuum (VP) and modified atmosphere (MAP: 5% O₂/35% CO₂/60% N₂). During the chilled storage, the quality changes were evaluated by sensory evaluation, chemical and microbiological analysis. The total volatile basic nitrogen content remained almost constant, between 16 and 19 mg N/100 g muscle, during the storage period, for all samples. The TBARs values increased with storage time, for all batches and storage conditions. The application of SGS treatment to sardine fillets, resulted in a bacteriostatic effect, contributing to the improvement of the microbiological quality of fillets. Considering a sensory criteria, the shelf‐life of SGS pre‐treated sardine fillets was found to be 5 days in AP and MAP while in VP‐treated fillets a shelf‐life of 8 days was reported. At sensory rejection, sardine fillets presented a K‐value of 30% in AP and MAP batches and 40% in VP batch.     

Infinitely Divisible Distributions in Integer‐Valued Garch Models

We propose an integer‐valued stochastic process with conditional marginal distribution belonging to the class of infinitely divisible discrete probability laws. With this proposal, we introduce a wide class of models for count time series that includes the Poisson integer‐valued generalized autoregressive conditional heteroscedastic (INGARCH) model (Ferland et al., 2006) and the negative binomial and generalized Poisson INGARCH models (Zhu, 2011, 2012a). The main probabilistic analysis of this process is developed stating, in particular, first‐order and second‐order stationarity conditions. The existence of a strictly stationary and ergodic solution is established in a subclass including the Poisson and generalized Poisson INGARCH models.     

Overall efficiency evaluation of commercial distillation columns with valve and dualflow trays

The main objective of this work is to establish appropriated ways for estimating the overall efficiencies of industrial distillation columns with valve trays with downcomer and dualflow trays. The knowledge of efficiencies has fundamental importance in the design and performance evaluation of distillation columns. Searching in the literature, a tree of alternatives was identified to compose the tray efficiency model, depending on the mass transfer models, the liquid distribution and vapor flow models on the tray, the liquid entrainment model, the multicomponent mixture equilibrium model, the physical properties models, the height of froth on the tray model and the efficiency definition. In this work, different methods to predict the overall efficiency of distillation columns with valve and dualflow trays were composed and compared with data from three commercial distillation columns under different operating conditions. The models were inserted in the Aspen Plus 12.1 simulator, in Fortran language, together with tray geometrical data, fluid properties and operating data of the distillation columns. For each column, the best thermodynamic package was chosen by checking the temperature profile and overhead and bottom compositions obtained via simulation against the corresponding actual data of industrial columns. A modification in the fraction of holes evaluation that is jetting parameter of the Garcia's hydraulic model of dispersion above the tray was proposed. This modification produced better results than the original model to predict the fraction of holes that are jetting and in the efficiency of dualflow trays and similar results to Garcia model in the efficiency evaluation of valve trays. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Nutritional Value of Seven Freshwater Fish Species From the Brazilian Pantanal

This study determined the proximate composition and fatty acid profile of the lipid fraction in muscle tissue (fillet) of seven fish species from the Miranda River, Brazil. Total lipid content had the largest coefficient of variation among species (73%), while protein content had the smallest (4.5%), allowing Pimelodus argenteus (mandi-prateado) to be categorized as lean fish; Pimelodus maculatus (mandi-amarelo), Hemisorubim platyrhynchos (jurupoca), and Pinirampus pirinampu (barbado) as species with medium fat content, and Paulicea luetkeni (jaú) and Surubim lima (jurupensém) as fatty fish. In all the species investigated, palmitic acid (23.76–25.99%) was the predominant saturated fatty acid. Oleic acid (16.09–32.90%) was the most abundant monounsaturated fatty acid. Total omega-6 polyunsaturated fatty acids (5.99–15.56%) were the predominant polyunsaturated fatty acids, except in Ageneiosus brevifilis (palmito), in which total omega-3 polyunsaturated fatty acids predominated (10.30%). All the species had favorable indices of nutritional quality for total lipids, with respect to human consumption.     

Niobium and tantalum recovery from the primary source and from tin slag,an industrial challenge: A review

Niobium (Nb) and Tantalum (Ta) are used to increase materials' mechanical resistance and produce lighter alloys. Worldwide Nb production reached 78 000 t in 2020. The reduced ore offer justifies the recycling of these metals from tin slag, contributing to the circular economy. Nb₂O₅ and Ta₂O₅ extraction either from the primary source or the tin slag is an industrial challenge. Nb and Ta dissolution processes already implemented are fluoride leaching, sulphuric leaching, alkaline leaching, and alkaline roasting. The fluoride process raises environmental concerns about waste control. The sulphuric method can be managed to have higher Nb and Ta extraction in a less aggressive process, if some changes are implemented, such as increasing the number of extraction steps, decreasing the pulp density, or increasing the temperature; however, the efficiency of this methodology must be tested for tin slag. The alkaline method seems to be more selective to Nb and Ta by reactants and temperature control. Despite those well-established Nb and Ta treatments, they must be adapted to recover Nb and Ta from slag. The slag has low Nb and Ta content, while high Si and Ca concentrations exist in the matrix. This paper brings the main methods used to extract the Nb and Ta from the primary resources and an overview of Nb and Ta recovery from the slag. This investigation comes as a tool to guide the development of new methods to recover Nb and Ta from low-grade sources such as tin slag.     

Ultrafast Self‐Limited Growth of Strictly Monolayer WSe2 Crystals

The controllable synthesis of uniform tungsten diselenide (WSe₂) is crucial for its emerging applications due to the high sensitivity of its extraordinary physicochemical properties to its layer numbers. However, undesirable multilayer regions inevitably form during the fabrication of WSe₂ via the traditional chemical vapor deposition process resulted from the lack of significantly energetically favorable competition between layer accumulation and size expansion. This work innovatively introduces Cu to occupy the hexagonal site positioned at the center of the six membered ring of the WSe₂ surface, thus filtrates the undesired reaction path through precisely thermodynamical control and achieves self‐limited growth WSe₂ crystals. The as‐obtained WSe₂ crystals are characterized as strictly single‐layer over the entire wafer. Furthermore, the strictly self‐limited growth behavior can achieve the “win–win” cooperation with the synthesis efficiency. The fastest growth (≈15 times of the growth rate in the previous work) of strictly monolayer WSe₂ crystals thus far is realized due to the high‐efficiency simultaneous selenization process. The as‐proposed ultrafast Cu‐assisted self‐limited growth method opens a new avenue to fabricate strictly monolayer transition metal dichalcogenides crystals and further promotes their practical applications in the future industrial applications.     

Metformin Reduces Lipogenesis Markers in Obese Mice Fed a Low-Carbohydrate and High-Fat Diet

Lipogenesis is the process by which fatty acids are synthesized. In metabolic syndrome, an insulin resistant state along with high plasma levels of free fatty acids (FFA) and hyperglycemia may contribute to the lipogenic process. The aim of the present study was to investigate the effects of oral administration of metformin on the expression of lipogenic genes and glycemic profile in mice fed with low‐carbohydrate high‐fat diet by evaluating their metabolic profile. SWISS male mice were divided into 4 groups (N = 7) that were fed with standard (ST), standard plus metformin (ST + MET), low‐carbohydrate high‐fat diet (LCHFD) and low‐carbohydrate high‐fat diet plus metformin (LCHFD + MET) (100 mg kg^?1 diet) diets respectively. Food intake, body weight and blood parameters, such as glucose tolerance, insulin sensitivity, glucose, HDL‐c, total cholesterol, triglycerides, ASL and ALT levels were assessed. Histological analyses were performed on hematoxylin and eosin‐stained epididymal adipose tissue histological specimens. The expression levels of peroxisome proliferator‐activated receptor (PPARγ), sterol regulatory element‐binding protein 1 (SREBP1), fatty acid synthase (FAS) and acetyl‐CoA carboxylase (ACC), were assessed by RT‐PCR. This study showed that metformin decreased adipocyte area, body weight and food consumption in obese animals when compared to the standard group. Furthermore, the expression of lipogenic markers in adipose tissue were diminished in obese animals treated with metformin. This data showed that oral administration of metformin improved glucose and lipid metabolic parameters in white adipose tissue by reducing the expression of lipogenesis markers, suggesting an important clinical application of MET in treating obesity‐related diseases in metabolic syndrome.     

The Quantum Ultimatum Game

A quantum version of the ultimatum game is studied. Both a restricted version with classical moves and the unitary version are considered. With entangled initial states, Nash equilibria in quantum games are in general different from those of classical games. Quantum versions might therefore be useful as a framework for modeling deviations from classical Nash equilibrium in experimental games.PACS:02.50.Le; 03.67.-a