Effect of natural and synthetic antioxidants incorporation on the gas permeation properties of poly(lactic acid) films

Gas permeation properties (permeability, diffusivity and solubility coefficients) were determined for carbon dioxide and oxygen in poly(lactic acid) (PLA) films enriched with 0, 2, 4 and 10 wt.% of different antioxidants, at three temperatures, 284, 293 and 303 K, using a time-lag apparatus. Three antioxidants, a natural, α-tocopherol (AT), and two synthetic, butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), were tested. DSC results show that the polymer glass transition temperature slightly decreases with the increase of the antioxidant content. The crystallinity degree of PLA films decreases with the addition of BHT and TBHQ, whereas the incorporation of AT increases the crystallinity of PLA films. The permeability towards water vapour, at 299 K and 45% of relative humidity, and surface energy show a decreased in the wettability of the prepared materials with the increase of the antioxidants content. The incapacity to measure gas permeation in PLA films with 10 wt.% of AT and BHT incorporated was due to phase separation, proved by SEM images. The CO₂ and O₂ permeation results show that PLA barrier properties can be improved by the incorporation of antioxidants but are strongly dependent on the amount and structure of the antioxidant added.     

The influence of the processing route on the fragmentation of (Nb,Ti)C stringers and its role on mechanical properties and hydrogen embrittlement of nickel based alloy 718

The nickel-base superalloy 718 is a precipitation hardened alloy widely used in the nuclear fuel assembly of pressurized water reactors (PWR). However, the alloy can experience failure due to hydrogen embrittlement (HE). The processing route can influence the microstructure of the material and, therefore, the HE degree. In particular, the size and distribution of the (Nb,Ti)C particles can be affected by the processing. In this regard, the objective of this work was to analyze the influence of cold and hot deformation processing routes on the development of the microstructure, and the consequences on mechanical properties and hydrogen embrittlement. Tensile samples were hydrogenated through gaseous charging and compared to non-hydrogenated samples. Characterization was performed via scanning and transmission electron microscopies, as well as electron backscattered diffraction. The processing was effective to promote significant variations in average grain size and length fraction of special Σ3ⁿ boundaries, as well as reduction of average (Nb,Ti)C particle size, being these changes more intense for the cold-rolled route. For the mechanical properties, on one side, the cold-rolled route presented the highest increase in ductility for non-hydrogenated samples, while, on the other side, had the highest degree of embrittlement under hydrogen. This dual behavior was attributed to the interaction of hydrogen with the (Nb,Ti)C particles and stringers and its ensuing influence on the fracture processes.     

Production of hydrogen from methanol steam reforming using CuPd/ZrO2 catalysts – Influence of the catalytic surface on methanol conversion and CO selectivity

Electricity generation for mobile applications by proton exchange membrane fuel cells (PEMFCs) is typically hindered by the low volumetric energy density of hydrogen. Nevertheless, nearly pure hydrogen can be generated in-situ from methanol steam reforming (MSR), with Cu-based catalysts being the most common MSR catalysts. Cu-based catalysts display high catalytic performance, even at low temperatures (ca. 250 °C), but are easily deactivated. On the other hand, Pd-based catalysts are very stable but show poor MSR selectivity, producing high concentrations of CO as by-product. This work studies bimetallic catalysts where Cu was added as a promoter to increase MSR selectivity of Pd. Specifically, the surface composition was tuned by different sequences of Cu and Pd impregnation on a monoclinic ZrO₂ support. Both methanol conversion and MSR selectivity were higher for the catalyst with a CuPd-rich surface compared to the catalyst with a Pd-rich surface. Characterization analysis indicate that the higher MSR selectivity results from a strong interaction between the two metals when Pd is impregnated first (likely an alloy). This sequence also resulted in better metallic dispersion on the support, leading to higher methanol conversion. A H₂ production rate of 86.3 mmol h^?1 g^?1 was achieved at low temperature (220 °C) for the best performing catalyst.     

In vivo bone formation by human bone marrow cells: effect of osteogenic culture supplements and cell densities

Bone marrow is known to contain a population of osteoprogenitor cells that can go through complete differentiation when cultured in a medium containing appropriate bioactive factors. In this study, porous particles of a calcium phosphate material were seeded with adult human bone marrow cells in the second passage. After an additional culture period of 1 wk in the particles, these hybrid constructs were subcutaneouslly implanted in nude mice with a survival period of 4 wk. The cell seeding densities range from 0–200 000 cells per particle and the cell culture system was designed to investigate the single and combined effects of dexamethasone and recombinant human bone morphogenetic protein 2 (rhBMP-2). The hybrid material/tissue constructs were processed for histology and the amount of de novo bone formation was quantified, for each culture condition, by histomorphometric techniques. The relative percentage of mineralized bone formation reached a maximal value of 19.77±5.06, for samples cultured in the presence of rhBMP-2 and with a seeding density of 200 000 cells/particle, compared to 0.52±0.45 for samples in which no cells had been cultured and had been incubated in culture medium supplemented with Dex and rhBMP-2. For the tested conditions and for the low cell numbers used in this study, rhBMP-2 proved to be an essential bioactive factor to obtain in vivo bone formation by our culture system. The results from this study prove the potential of cultured adult human bone marrow cells to initiate and accelerate de novo bone formation after transplantation into an ectopic site. © 1998 Kluwer Academic Publishers     

The electroactive integrated optical waveguide: ultrasensitive spectroelectrochemistry of submonolayer adsorbates

Highly sensitive spectroelectrochemistry of adsorbed films on ITO is demonstrated with the electroactive integrated optical waveguide (EA-IOW). The EA-IOW, a single-mode planar waveguide coated with an ITO layer, is ～10(4)-fold more sensitive to changes in absorbance occurring during electrochemical events versus a single-pass transmission spectroelectrochemical experiment, as demonstrated by reduction of surface-adsorbed methylene blue. Furthermore, the EA-IOW is selective to near-surface events, as it is relatively insensitive to absorbance by solutions of dissolved chromophores at <1 mM. The EA-IOW is also used to monitor the formation of Prussian Blue during the reduction of ferricyanide, an event that is not easily followed using current-detected cyclic voltammetry, due to interfering faradaic and non-faradaic electrochemical events. The optical background of the EA-IOW is potential-dependent and is explained by ion diffusion into the ITO and by voltage-dependent changes in optical constants for the material. Finally, the high sensitivity of the EA-IOW (relative to other evanescent-field-based spectroelectrochemical techniques) is discussed in terms of its design.     

Monocytes-macrophages and cytokines/chemokines in fine-needle aspiration biopsy cultures: enhanced interleukin-1 receptor antagonist synthesis in rejection-free kidney transplant patients

BACKGROUND: Monocytes-macrophages are found within kidney allografts during the first days after surgery, where they perform "housekeeping" tasks, participate in postreperfusion injury, and act as antigen-presenting cells, as well as become involved in the effector phase of acute rejection. They also seem to play a prominent role in chronic rejection. We quantified their presence in fine-needle aspiration biopsies and studied the growth factors that, we hypothesized, would mark the different implications of the presence of monocytes-macrophages. METHODS: Fine-needle aspiration biopsies were obtained from 56 adult renal transplants and analyzed for CD14+ using the alkaline phosphatase-anti-alkaline phosphatase procedure. Thirty-three patients were studied on the production of interleukin (IL)-1 receptor antagonist (IL-1ra), IL-6, IL-8, macrophage colony-stimulating factor, monocyte chemotactic protein 1, and macrophage inflammatory protein 1alpha by aspiration biopsies cultures using enzyme-linked immunosorbent assay techniques. RESULTS: CD14+ cells were present at significantly higher numbers in steroid-resistant acute rejections but also during the first days after surgery, especially if acute tubular necrosis was present. We found a significantly higher production of IL-1ra by rejection-free patients compared with acutely rejecting patients, and this difference was already established on day 7 after surgery (10+/-10.5 days before rejection). CONCLUSIONS: Monocytes-macrophages are present at higher numbers in aspiration biopsies of kidney transplant patients suffering either acute tubular necrosis or steroid-resistant rejections, but they are present during the first days after transplant in stable patients, too. The production of IL-1ra is significantly up-regulated in stable patients, which suggests that monocytes-macrophages may constitute an early key factor in the down-regulation of the anti-allograft immune response.     

Neo-fuzzy neuron learning using backfitting algorithm

Neural Computing and Applications - This paper proposes an automatic and simple approach to design a neo-fuzzy neuron for identification purposes. The proposed approach uses the backfitting...     

Mixed Logical Dynamical Nonlinear Model Predictive Controller for Large‐Scale Solar Fields

This paper presents a control algorithm for reducing heat losses caused by clouds in large solar fields. The formulation is based on a Mixed Logical Dynamical (MLD) representation of the solar field plus the application of a Practical Nonlinear Model Predictive Controller (PNMPC) for calculating the optimal control action. The main purpose of the controller is to deactivate fields with inlet temperature greater than outlet temperature and to manipulate the oil flow rate of the activated fields for tracking the reference of the outlet temperature. A simplified lumped parameters model is used for prediction and simulation of the solar fields.     

Toward characterizing HTML defects on the Web

HTML is being massively used as an interface to provide services to users. Web developers are producing and changing sites at a high pace while trying to support the latest HTML standards. In this context, it is common to find websites that do not comply with the standards and fail to be correctly processed by browsers. Considering this dynamic environment and the increasingly large diversity of browsers with frequent updates, the appearance of problems in web pages is a common, sometimes severe, and hard‐to‐track problem. In this short communication, we describe the initial design of an approach that will be used to obtain information regarding the characteristics of HTML documents on the Web and extract indicators of representative errors made by their developers. Preliminary results show nearly 90% of the pages analyzed having at least one type of error and the prevalence of a small number of error types.     

Evaluation of the addition of wheat residues in the production of Pinus oocarpa agglomerated panels

Clean Technologies and Environmental Policy - The aim of this research was to evaluate the physical and mechanical properties of Pinus oocarpa wood agglomerated panels produced with the addition of...