袖子与前衣片对条对格关系的研究

本文主要研究袖子结构与前衣片对条对格的关系。研究表明，要使得袖子与前衣片的条格对位，其结构应先确定袖子的袖山高为＋2．5cm，取前袖山斜线长为前AH－1．5cm，后袖山斜线长为后AH，在该袖上找到对条对格的对应点，然后保持袖肥不变，再将袖子的袖山增高0．3cm，这时袖山上总缝缩量的大小符合一般面料的需要，且分布均匀，能保证袖子与前衣片的对条对格。     

基于移动代理的信息收集方法研究

传统的用软盘收集信息的方法存在一些不足之处，本文介绍了移动代理技术，给出了用移动代理技术来实现信息收集的方法，对该方法进行了安全性分析，并说明了该方法的优点。     

Password memorability and security: empirical results

Users rarely choose passwords that are both hard to guess and easy to remember. To determine how to help users choose good passwords, the authors performed a controlled trial of the effects of giving users different kinds of advice. Some of their results challenge the established wisdom.     

某型内燃机闭环控制减振的仿真研究

内燃机自身的振动是重型军用车辆主要的振动和噪声源,对其进行有效的振动控制十分重要.但由于内燃机系统结构的复杂性,研究其振动和噪声控制比较困难.针对某型内燃机系统,采用Matlab软件的Simulink工具,建立了整个系统的动力学仿真模型,并分别对该模型进行简谐、白噪声信号扰动下的减振控制研究,控制方法采用闭环数字PI策略.系统输出转矩和转速的曲线结果表明减振具有明显的效果.     

Effect of synthesis temperature on density and microstructure of MgB2 superconductor at ambient pressure

The experimental thermodynamic of MgB₂ synthesis process and phase compositions have been investigated by diffraction thermal analysis (DTA) technology and X-ray diffraction. The fabrication of MgB₂ bulks and superconducting properties at the temperatures range from 600 to 800°C were reported. And microstructure of MgB₂ bulks were observed by scanning electron microscope (SEM). A method was developed to determine the porosity of MgB₂ and the highest density can be obtained in MgB₂ prepared at 650°C at ambient pressure. It is found that the vapor pressure of Mg increases remarkably at high temperature, leading to the high porosity in MgB₂ samples. MgB₂ bulk with good superconducting property and fine microstructure was synthesized at 750°C.     

An accurate analytical approach to electron crystallography

A much more accurate analytical expression of dynamical electron diffraction than the phase object approximation (POA) formula has been derived in this paper which decreases the restriction of sample thickness up to almost one order of magnitude compared to POA theory. The importance of the new expression is twofold. First, a sample with such a thickness that new expression remains valid can be prepared experimentally. Second, the new expression reveals a clear and straightforward relationship between the wave function and crystal potential. In the expression, the effect of dynamical diffraction on wave function can be simply attributed to two factors TP(D) = (sin(lambda pi zg2))/(4pi2g2) and TA(D) = [1 - cos(lambda pi zg2)]/4pi2g2. Compared to the effect of transfer functions of an electron microscope on wave function, we found that TP(d) and TA(d) play the same role as transfer function but are independent of the instrument.For this reason, we here call the former as "extrinsic transfer functions" and the latter as "intrinsic" ones. In principle, one should correct not only extrinsic transfer functions but also intrinsic ones if one desires to achieve higher resolution.     

Preserving global features of fluid animation from a single image using video examples

We synthesize animations from a single image by transferring fluid motion of a video example globally.Given a target image of a fluid scene,an alpha matte is required to extract the fluid region.Our me...     

基于相关性反馈的自适应热点话题追踪模型

针对在热点话题追踪过程中容易发生话题漂移的问题,提出了基于相关性反馈的自适应热点话题追踪模型。为准确把握话题的动态演变过程,首先,在词频-逆向文档频率(term frequency-inverse document frequency, TF-IDF)的基础上引入了相关度因子。其次,构造了报道与话题的相关度计算公式和新特征词能否反馈加入到话题词汇库的判别函数。同时,利用了话题词汇库本身的特性,构造了自适应更新阈值和自适应相关阈值的动态计算方法。最后,根据各个特征词对该话题贡献度的大小,对更新后的词汇库中的各特征词动态赋予新权重。实验结果显示,和其它3类追踪器相比,该追踪器模型的漏报率平均降低0.018、误报率平均降低0.063,这表明,该追踪模型更适合于解决话题漂移问题。     

Experimental investigation and numerical simulation of large-sized aluminum tube extrusion forming

Large-sized aluminum tube has big section effect, aspect ratio and thin thickness, so that the extrusion technology is complex and the large specific pressure is generated in extrusion cavity. The temperature variation and velocity effect is difficult to control. The extrusion forming of large-sized aluminum tube was researched and simulated. Three-dimensional thermo-mechanical coupled finite element model was constructed and appropriate boundary conditions were given out. The results show that large-sized aluminum tube can be formed by isothermal extrusion through controlling the extrusion velocity and founding the relationship between extrusion velocity and extrusion temperature.