Investigation of Ozone Concentration Measurement by Visible Photo Absorption Method

The measurement of ozone concentration based on the visible photo absorption method is investigated. An LED having an emission peak at 609 nm and a photo diode sensitive at visible light frequencies are used as the light source and the photo detector, respectively. The transmittance is measured as a function of ozone concentration, which is in reasonable agreement with the Beer–Lambert relationship. The effective absorption cross-section can therefore be estimated from the fitting procedure. The concentrations determined by both the UV and visible photo absorptions agree well with each other in the range from 7.1 to 68.4 g/m³(N). The relative error in these concentrations is discussed on the basis of the Twyman–Lothian curve. The ozone measurement for the air-fed ozone generation is also investigated. The effect of photo absorption due to NOx species is unavoidable. The present results provide useful data if the ozone measurement based on the visible photo absorption method is applied to ozone monitoring instruments or used for laboratory experiments.     

Synthesis and Self-Organization of Fluorene-Conjugated Bisimidazolylporphyrin and Its Optical Properties

A conjugated-bisimidazolylporphyrin bridged by bis(ethynylfluorene) was synthesized and organized into linear polymer through self-coordination having mean molecular weights, M_w and M_n, of ~2.1 × 10⁵ Da and ~1.6 × 10⁵ Da, respectively. A large two-photon absorption cross section value of 3.4 × 10⁵ GM (per dimer unit) was observed. This value was comparable to that of the previously reported self-assembled linear polymer consisting of butadiyne-bridged imidazolylporphyrins. The two-photon absorption properties could be controlled by tuning the wavelength and absorption intensity of the one-photon absorption.     

Finite element polycrystal model simulation of cold rolling textures in deformation processed two-phase Nb／Al metal-metal composites

The finite element polyerystal model (FEPM) was extended and applied to simulate the development of the cold rolling textures of matrix aluminum in deformation processed two-phase 10% and 20% Nb/Al(in volume fraction) metal-metal composites on the basis of slip deformation of individual grains. This simulation method can assure the continuity of stress and displacement at the boundary during heterogeneous deformation and take arbitrary boundary conditions into consideration. The starting hot-extruded textures, as initial input condition, were taken into account in the FEPM simulation. The simulation results show that the main texture components and their evolution after various cold rolling reductions in 10% and 20% Nb/Al metal-metal composites are well qualitatively in agreement with the experimental ones. The initially extruded textures are rather weak, so they have no much influence on the simulated final cold rolling textures of the matrix aluminum for Nb/Al composites.     

Controllable electrode activities of nano-carbon films while maintaining surface flatness by electrochemical pretreatment

A carbon film consisting nanocrystallites with mixed sp² and sp³ bonds formed by using the electron cyclotron resonance (ECR) sputtering method was studied with respect to the changes in characteristics caused by electrochemical pretreatment (ECP). Unlike glassy carbon, our sputtered nanocrystalline carbon film deposited at an acceleration voltage of 75 V (ECR-75 nano-carbon film) largely retained its surface flatness after the ECP. This robust surface could be caused by an increase of 42% in the sp³ carbon realized by increasing the acceleration voltage during sputtering. The electrode activity of ECR-75 nano-carbon film was improved for surface sensitive species including Fe^3+/2+ unlike the boron doped diamond (BDD) electrode. This is because a sufficient quantity of surface sp² bonds remained and because the introduction of surface oxygen-containing groups is more efficient than with the BDD electrode. With pretreated ECR-75 nano-carbon film, the peak potential of glutathione was reduced solely due to the increase in the surface hydrophilicity with a sufficient quantity of surface sp² bonds, thus achieving the lowest detection limit (0.4 μM) ever obtained with carbon electrodes. We also achieved the stable measurement of 30 μM of serotonin (20 times) without the electrode surface fouling found with other electrodes.     

STORY GENERATION BASED ON DYNAMICS OF THE MIND

A story generation system based on dynamics of the mind is presented. Semantic theories until now avoided discussing a linkage of language with encyclopedic human knowledge. This paper attacks the problem of how to make clear the complicated, wide-ranging dynamics of the mind and how to connect it to language.
First, the background of this study is shown, in which our model of the mind, with both five levels along the concept formation process and eight domains according to the contents of mental activities, is surveyed.
Based on this model, then, the dynamics of mind are discussed, along an Aesop fable. A unit of data processing in the mind is called a "module," and the mental dynamics are considered as a chain activation of those modules, represented by a dynamic network. Next, a method for story generation is discussed. Propositional information of a sentence is embedded in a slot of activated, frame-structured modules, and the discourse structure of a generated story basically depends on the dynamic network. Both the chain activation and the generation processes are verified by experiments.
Lastly, residual problems of our research, a comparison with related research, and its applications are discussed.
This case study would be expected to give a basis to integrated systems for problem solving, natural language and image understandings, their generations, and intelligent robots.     

In situ visualization of degradation of silicon field emitter tips

This paper deals with the simultaneous observation of both the electron field emission from nanoscopic tips by electrical means and their structural shape change by an ultra‐high resolution transmission electron microscope (TEM). Nanoneedles with sharp tips of radius in the nanometer range were fabricated with semiconductor micromachining technology. A correlation between the electron field emission characteristics and the structural change of the emitter tip was clearly observed. Copyright © 2007 Institute of Electrical Engineers of Japan© 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of a 400 kJ Nb3Sn superconducting magnet for an SMES system

An Nb₃Sn superconducting magnet to store 400 kJ was developed as a unit magnet for a 2.4-MJ SMES system used for stabilization studies of electrical power systems. The superconducting magnet consists of a cryostat and an Nb₃Sn coil. The dimensions of the coil are: 340 mm inner diameter, 700 mm outer diameter and 177 mm axial length. The pool-cooled coil is a stack of 20 Nb₃Sn double pancakes, and the cooling channels are aligned between pancake coils. To reduce Joule loss in electrical power converters, the maximum operating current of the coil is designed to be 350 A, which is one order of magnitude less than the operating currents of similar scale coils for pulse use. The conductor is an Nb₃Sn monolithic conductor with cross section 1.50 × 2.38 mm. For good superconducting stability and high dielectric strength of the coil, the Nb₃Sn double pancakes were wound by the react-and-wind technique. Operation of dc current to 105% (367.5 A) of the design operating current was achieved without quench. After the whole of the coil was exposed out of liquid helium, the coil did not quench under 120 A current operation for more than 2 hours. It was verified that the coil was stable for the SMES system. © 1998 Scripta Technica, Inc. Electr Eng Jpn, 121(3): 44–52, 1997     

Optimization method of P+ ω PSS parameters for stability and robustness enhancement in a multimachine power system

Recent steady increase of electric power demand causes power sources to be large and far from cities. Wide area power interchanges lead to larger and more complex power systems. This makes the network susceptible to poor damping power swing oscillations of relatively low frequencies which influence the whole system. This paper describes a newly developed generator's double input signal PSS (P+ ω input PSS) design method. Several power system conditions (power flow and/or power patterns) are considered to satisfy a well‐stabilized power system for each system condition. Major features of this method are: (1) Weighting factor for eigenvalue sensitivity of the oscillation mode is considered when the parameters of the PSS are updated during the optimization process. (2) The new method provides good results for the generator's local and interarea oscillation modes under peak and off‐peak power flow conditions. © 2000 Scripta Technica, Electr Eng Jpn, 131(1): 19–31, 2000