Entirely VPE-grown 1-5?m DFB lasers with low threshold currents

Entirely hydride VPE-grown 1.5?m DFB lasers have been obtained by means of high controllability in film thickness and alloy composition for the GalnAsP/InP system. A low threshold current of 13 mA was achieved by improving the growth method for the layer burying the grating. High uniformity in threshold current and lasing wavelength (Ith = 27.3 ± 9.7 mA, ? = 15571 ± 12?) was obtained.     

Minor role of fractographic features in basic fatigue crack propagation properties

The fatigue crack propagation rate and the fatigue threshold were investigated for transverse-butt-welded joints of the austenitic stainless steel SUS304. Specimens were of the center-cracked type. In three sets of tests the fatigue crack passed through the weld metal, and in the other two sets, through the base metal. The fatigue crack propagation properties coincided with each other at different stress ratios for the weld metal, and at the higher stress ratios for the base metal. The propagation properties improved at the stress ratio of zero for the base metal. The absence of a stress ratio effect means that the coincided properties are basic ones in which fatigue crack closure does not occur. However, fractographic appearance and surface roughness were quite different between weld metal and base metal. The coincidence of fatigue crack propagation properties in spite of the difference in fractographic features reveals that the fractographic appearance and surface roughness only have a minor effect on basic fatigue crack propagation behaviour.     

Asymmetry in object substitution masking occurs relative to the direction of spatial attention shift.

A sparse mask that persists beyond the duration of a target can reduce its visibility, a phenomenon called object substitution masking. Y. Jiang and M. M. Chun (2001a) found an asymmetric pattern of substitution masking such that a mask on the peripheral side of the target caused stronger substitution masking than on the central side. Assuming spatial attention was focused toward the target, the peripheral and central masks were located in the same and opposite direction of an attentional path with reference to the target in their study. We hypothesized that this asymmetric mask configuration relative to the attentional shift contributes to asymmetric substitution masking. To test this hypothesis, we conducted four experiments among which the presence or absence of the center–periphery relationship and the presence or absence of the asymmetric mask configuration were manipulated independently and orthogonally. The results suggest that asymmetric substitution masking occurs relative to the direction of spatial attention irrespective of the central–peripheral relation. We propose that the asymmetry in substitution masking might be explained by attentional momentum associated with orienting toward the target. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance of natural uranium- and thorium-fueled fast breeder reactors (FBRs) for U fissile production

The performance of natural uranium and thorium-fueled fast breeder reactors (FBRs) for producing ²³³U fissile material, which does not exist in nature, is investigated. It is recognized that excess neutrons from FBRs with good neutron economic characteristics can be efficiently used for producing ²³³U. Two distinct metallic fuel pins, one with natural uranium and another with natural thorium, are loaded into a large sodium-cooled FBR. ²³³U and the associated-U isotopes are extracted from the thorium fuel pins. The FBR itself is self-sustained by plutonium produced in the uranium fuel pins. Under the equilibrium state, both uranium and thorium spent fuels are periodically discharged with a certain discharge rate and then separated. All discharged fission products are removed and all discharged actinides are returned to the FBRs except the discharged uranium utilized for fresh fuel of the other thorium-cycled reactors. ²³³U-production rate of the FBRs as a function of both the uranium–thorium fuel pins fraction in the core and the discharge fuel burnup is estimated. The result shows that larger fraction of uranium pins is better for the FBR criticality while larger fraction of thorium fuel pins and lower fuel burnup give higher ²³³U production rate.     

Transmission electron microscopic observations of the decomposition process of lithium alanate

The thermal decomposition process of lithium alanate (LiAlH₄) was investigated by TEM, TG-DTA and XRD. It was shown that LiAlH₄ decomposes through a two-step reaction: a liquid-to-solid phase transition in the first step of the decomposition and a solid-to-solid reaction in the second step of the decomposition, both steps accompanied by hydrogen release. The particle size of the aluminum (Al), which formed in the first decomposition step, was much larger than that in the second decomposition step. In addition, Al particles formed in the liquid phase of LiAlH₄ in the first decomposition step, while, they form in solid phase of Li₃AlH₆ in the second decomposition step, resulting in the kinetics of the first decomposition step being faster than that of the second decomposition step. The investigation clearly demonstrated the reaction model of the decomposition of LiAlH₄ in the nano-scale, showing different diffusion processes of Al in each of the decomposition steps.     

Effect of 7-methylated bile acids and bile alcohols on cholesterol metabolism in hamsters

The effect of 7-methyl substituted bile acid and bile alcohol analogues on cholesterol metabolism was studied in the hamster. Animals were fed chow plus 0.1% cholesterol supplemented with 0.1% of one of the following steroids: chenodeoxycholic acid, 7-methyl-chenodeoxy-cholic acid, 7β-methyl-24-nor-5β-cholestane-3α,7α,25-triol, cholic acid, 7-methyl-cholic acid, or 7β-methyl-24-nor-5β-cholestane-3α,7α,12α,25-tetrol. Cholesterol absorption was determined from fecal analysis after feeding of radiolabeled cholesterol and β-sitosterol. Of the six compounds studied, chenodeoxycholic acid and 7-methyl-chenodeoxycholic acid decreased intestinal cholesterol absorption (17% and 31% decrease, respectively). Only 7-methyl-chenodeoxycholic acid decreased serum cholesterol concentration (29% decrease), but there were no analogous changes of liver and biliary cholesterol concentration and cholesterol saturation of bile. Total fecal neutral sterol excretion was increased in the groups fed chenodeoxycholic acid and 7-methyl-chenodeoxycholic acid. In addition, the production of coprostanol was increased in both groups. These data suggest that 7-methyl-chenodeoxycholic acid resembles chenodeoxycholic acid in its effect on cholesterol metabolism and may be a potential candidate for further studies of its gallstone-dissolving properties.     

Electron spin resonance studies of γ-irradiated cellulose. II. Free radicals in accessible regions to water in cellulose I and cellulose II

The types of free radicals produced in the water-accessible regions of cellulose I and cellulose II fibers by γ-irradiation in nitrogen atmosphere at room temperature were studied by ESR spectroscopy. The ESR spectra of the irradiated cellulose I and II change by contacting the fibers with water, and after immersion in water the spectral shape depends on the orientation of the fiber axes to the magnetic field. These spectra are probably related to the free radicals generated in the highly ordered regions inaccessible to water in irradiated cellulosic fibers. The ESR spectrum of free radicals generated in decrystallized cellulose after irradiation consists of a singlet and a doublet. When the ESR spectra of free radicals formed in the highly ordered regions of cellulose I and II and the singlet and the doublet are combined in adequate ratio, the constructed spectra are similar to those of the radicals scavenged by water in the irradiated cellulose I and II fibers. From these facts, the spectra due to the free radicals in the water-accessible regions in irradiated cellulose I and II are considered to consist of the singlet and the doublet formed by free radicals in the typical amorphous regions and the spectra of other types of radicals generated in the semicrystalline regions.     

Tribological Properties between Taut Hair Fibers in Wet Conditions: A New Shampoo Formulation for Eliminating Stick-Slip Friction

The tribological properties between taut hair fibers in wet conditions were investigated to evaluate the tangling/detangling performance of shampoo formulations during washing (particularly rinsing). A new setup for friction measurements between taut hair fibers was established. Using the setup, tribological properties of hair fibers treated with two shampoo formulations, whose tangling performances were different, were investigated. The base formulation for the shampoos was the same; the only difference was the type of amino-modified silicones used as conditioning agents. Shampoo (Sp) A (poor detangling performance) incudes water-insoluble silicone, and Sp B (excellent detangling performance) includes water-soluble silicone. The tribological behaviors between taut hair fibers treated with the diluted solutions of the Sp were very different; the Sp A-treated hair exhibited stick-slip sliding, whereas the Sp B-treated hair exhibited smooth sliding. This difference presumably comes from the different coacervation behaviors in the diluted solutions and resulting structure of conditioning film formed on hair surfaces. The smooth sliding (ideal for detangling) of Sp B-treated hair comes from the two-layer structure of the conditioning film on hair; positively charged amino-modified silicone dissolved in water adsorbed immediately on negatively charged hair surface, followed by the physical adsorption of coacervates on the adsorbed silicone layer. The outer coacervate layer is easily removed during sliding, and smooth sliding comes from the low friction of the silicone layer. The relationship between the type of amino-modified silicones, conditioning film formation on the surface, and tribological properties was discussed, which gives insights into designing Sp formulations with excellent detangling performance.     

Preparation of monodispersed polymer-modified silica particles by radical polymerization using silica colloid and introduction of functional groups on the composite surface

Summary Radical polymerizations of vinyl monomers using a initiator of 2,2-azobis(2-amidinopropane) dihydrochloride on monodispersed silica colloid led to formation of spherical polymer/SiO₂ composites, retained particle size. Addition of hydroxypropyl cellulose to the reaction system resulted in yielding excellent dispersible composites into ethanol by short period ultrasonic irradiation. The polymerization of styrene in the presence of mercapto-amine or carboxylic acid derivatives could successfully introduce amino or carboxyl group on the Poly(styrene)/SiO₂ composite.