Perovskite SrFe1-xTixO3-δ (x < = 0.1) cathode for low temperature solid oxide fuel cell

Stable and compatible cathode materials are a key factor for realizing the low-temperature (LT, ≤600?°C) operation and practical implementations of solid oxide fuel cells (SOFCs). In this study, perovskite oxides SrFe_1-xTi_xO_3-δ (x?< = 0.1), with various ratios of Ti doping, are prepared by a sol-gel method for cathode material for LT-SOFCs. The structure, morphology and thermo-gravimetric characteristics of the resultant SFT powders are investigated. It is found that the Ti is successfully doped into SrFeO_3-δ to form a single phase cubic perovskite structure and crystal structure of SFT shows better stability than SrFeO_3-δ. The dc electrical conductivity and electrochemical properties of SFT are measured and analysed by four-probe and electrochemical impedance spectra (EIS) measurements, respectively. The obtained SFT exhibits a very low polarization resistance (R_p), .01 Ωcm² at 600?C. The SFT powders using as cathode in fuel cell devices, exhibit maximum power density of 551?mW?cm^?2 with open circuit voltage (OCV) of 1.15?V at 600?C. The good performance of the SFT cathode indicates a high rate of oxygen diffusion through the material at cathode. By enabling operation at low temperatures, SFT cathodes may result in a practical implementation of SOFCs.     

Silicon Mitigates Drought Stress in Wheat (Triticum aestivum L.) Through Improving Photosynthetic Pigments,Biochemical and Yield Characters

Silicon - Feeling prone to stress differs with plant production stage, water scarcity near commencement of grain filling phase has a significant reduced grain yield through fewer endosperm and sink...     

Design of backtracking search heuristics for parameter estimation of power signals

Neural Computing and Applications - This study presents a novel implementation of evolutionary heuristics through backtracking search optimization algorithm (BSA) for accurate, efficient and robust...     

Integrative and multi-disciplinary framework for the 3D rehabilitation of large mandibular defects

The International Journal of Advanced Manufacturing Technology - The restoration of mandibular defects, especially large deformities is regarded as the most challenging surgical procedure owing to...     

Modeling and operation optimization of RE integrated microgrids considering economic,energy, and environmental aspects

Microgrids provide promising solution for integration of renewable energy sources in the electrical grid. To exploit the key benefits, achieving the economical operation of renewable aided microgrids has become necessary and is a challenging task. This paper presents an efficient optimization model to minimize the operational cost of a solar integrated microgrid. We formulate a joint optimization mixed integer problem for appropriate modeling of the system under various practical constraints. An efficient solution is obtained with a distributed approach such that the original problem is solved in two stages. Dual decomposition approach is adopted for cost, emissions, and solar share optimization. Lagrange relaxation, Lambda iteration method, and binary integer programming are employed to obtain the joint optimization solution. Finally, the performance of the proposed model is validated through simulations that show that an overall cost reduction of 4.2070e+04 $ and emission reduction of 7.2001e+03 kg are achieved with the proposed model.     

Heat transfer analysis for particle–fluid suspension thermomagnetohydrodynamic peristaltic flow with Darcy–Forchheimer medium

This theoretical analysis explores the effect of heat and mass transfer on particle–fluid suspension for the Rabinowitsch fluid model with the stiffness and dynamic damping effects through Darcy–Brinkman–Forchheimer porous medium. In this study, we also incorporate slip and transverse magnetic field effects. Using low Reynolds number, to neglect inertial forces and to keep the pressure constant during the flow, channel height is used largely as compared with the ratio of length of the wave. A numerical technique is used to solve flow governing system of differential equations. Particular attention is paid to viscous damping force parameter, stiffness parameter, and rigidity parameter; also, the numerical data for thermal profile, momentum, and concentration distribution are presented graphically. Outcomes are deliberated in detail for different fluid models (thinning, thickening, and viscous models). It is found that velocity profile increases for greater values of viscous damping effect and stiffness and rigidity parameter for shear thinning, but conflicting comportment is showed for thickening nature model. Viscous dissipation effects increases the thermal profile for all cases of fluid models. The scope of the present article is valuable in explaining the blood transport dynamics in small vessels while considering the important wall features with chemical reaction characteristics. The current analysis has extensive applications in biomedical engineering field, that is, peristaltic pumps.     

From Arteries to Capillaries: Approaches to Engineering Human Vasculature

From microscaled capillaries to millimeter‐sized vessels, human vasculature spans multiple scales and cell types. The convergence of bioengineering, materials science, and stem cell biology has enabled tissue engineers to recreate the structure and function of different hierarchical levels of the vascular tree. Engineering large‐scale vessels aims to replace damaged arteries, arterioles, and venules and their routine application in the clinic may become a reality in the near future. Strategies to engineer meso‐ and microvasculature are extensively explored to generate models for studying vascular biology, drug transport, and disease progression as well as for vascularizing engineered tissues for regenerative medicine. However, bioengineering tissues for transplantation has failed to result in clinical translation due to the lack of proper integrated vasculature for effective oxygen and nutrient delivery. The development of strategies to generate multiscale vascular networks and their direct anastomosis to host vasculature would greatly benefit this formidable goal. In this review, design considerations and technologies for engineering millimeter‐, meso‐, and microscale vessels are discussed. Examples of recent state‐of‐the‐art strategies to engineer multiscale vasculature are also provided. Finally, key challenges limiting the translation of vascularized tissues are identified and perspectives on future directions for exploration are presented.     

Recent progress in the modification of carbon materials and their application in composites for electromagnetic interference shielding

With the development in the modern technologies such as telecommunication instruments and scientific electronic devices, large amount of the electromagnetic radiations are produced, which lead to harmful effect on the highly sensitive electronic devices as well as on the health of human beings. To minimize the effect of electromagnetic radiations produced by different technologies, more efficient shielding materials are required which must be cost-effective, lightweight and good corrosion resistive. In this review, we focused on the shielding materials based on composites of carbon nanotubes and graphene. The typical surface modification of carbon nanotubes and graphene to optimize their interactions with polymers matrix has also summarized. It was found that the composites based on these carbon fillers were more efficient for electromagnetic interference shielding due to their unique properties (i.e., superior electrical, mechanical and thermal) together with lightweight, easy processing. Hence, the carbon nanotubes and graphene-based composites are excellent shielding materials against the electromagnetic radiations.     

Controlling the material removal and roughness of Inconel 718 in laser machining

Nickel alloys including Inconel 718 are considered as challenging materials for machining. Laser beam machining could be a promising choice to deal with such materials for simple to complex machining features. The machining accuracy is mainly dependent on the rate of material removal per laser scan. Because of the involvement of many laser parameters and complexity of the machining mechanism it is not always simple to achieve machining with desired accuracy. Actual machining depth extremely varies from very low to aggressively high values with reference to the designed depth. Thus, a research is needed to be carried out to control the process parameters to get actual material removal rate (MRR_act) equals to the theoretical material removal rate (MRR_th) with minimum surface roughness (SR) of the machined surfaces. In this study, five important laser parameters have been used to investigate their effects on MRR and SR. Statistical analysis are performed to identify the significant parameters with their strength of effects. Mathematical models have been developed and validated to predict the machining responses. Optimal set of laser parameters have also been proposed and confirmed to achieve the actual MRR close to the designed MRR (MRR_% = 100.1%) with minimum surface roughness (R_a = 2.67 µm).     

WEDM of layered composite: analyzing material removal and cut quality issues

The use of cladded bimaterial composites has grown in the recent past as they offer a combination of properties at low cost. But the heterogeneity which is the inherent attribute of these composites makes it challenging to accurately cut via conventional means. Therefore, thermal cutting is commonly employed for their cutting which not only produce poor cut quality and deeper heat affected zones but also demand subsequent finishing operations. Wire electric discharge cutting (WEDM) is a proficient alternate but low material removal (MRR) and widen kerf slot (KW) due to sideways sparking limit its application. Moreover, both layers of material have different thermoelectric properties and are subjected to simultaneous cutting by a single moving wire electrode which lead to produce different spark strength against both layers. In this regard, the present study aims to investigate the cutting potential of WEDM for cladded bimaterial with a prior focus on both the aforesaid issues, i.e. MRR and KW. Considering the thermoelectric nature of the WEDM, workpiece-related parameters like orientation of work surface and layer thickness of each layer are taken as control variables in addition to the WEDM process parameters. Experimental results are thoroughly analyzed using statistical and SEM analysis.