Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Laser Beam Welded TiAl-based Alloy

Post-weld heat treatment is carried out on the laser beam welded γ-TiAl-based alloy Ti-48Al-1Cr-1.5Nb-1Mn-0.2Si-0.5B (at. pct). The macro/microstructure and mechanical properties of both as-welded and heat-treated specimens are investigated by radiography, SEM, and tensile tests. Moreover, high energy synchrotron X-ray diffraction is performed to measure the residual stresses and evaluate the microstructure evolution. It is found that the residual stresses are distributed in a three-peak shape in the region of the weld zone and heat-affected zone of the as-welded specimen due to the microstructural transformation and heat softening. The residual stresses are largely relieved after the heat treatment. The heat-treated specimens have a near fully lamellar microstructure and show balanced mechanical properties of strength and ductility. The diffraction shows that the phase transformation from α ₂ to γ takes place under tensile load at 1023 K (750 °C), and the grain size and lamellar spacing are refined in the weld zone. Finally, the fracture mechanisms are found to be controlled by the local stress concentration-induced strain misfit between α ₂ and γ phases in the near γ grains and delamination and debonding in the lamellae. Boride ribbons of 5 μm in the near fully lamellar microstructure are found not to be detrimental to the tensile properties.     

Design of reconfigurable machining lines: A novel comprehensive optimisation method

We present a novel comprehensive optimization model for designing reconfigurable machining lines. Due to the proposed fine mathematical modelling, it is possible to optimize simultaneously the whole set of machines and machining modules as well as their cutting parameters, their configuration that will be used for processing of each part and part position at each machine. The experimental results show that the proposed optimization approach substantially outperforms the existing heuristic design method and therefore it can be used by the designers in order to reduce the total system cost and improve the efficiency of reconfigurable machining lines.     

Development of Saturable Absorbers for Laser Passive Q‐Switching near 1.5 μm Based on Transparent Ceramic Co2+:MgAl2O4

We describe the development of a reasonable cost Co²⁺:MgAl₂O₄ transparent ceramic plates fabrication technology that allows the producing of parts functioning as passive laser Q‐switches in the 1.3–1.7 μm domain. The main relevant material characteristics were measured. The absorption band, positioned between 1.2 and 1.7 μm, is typical of the ⁴A₂ (⁴F) → ⁴T₁ (⁴F) transition of Co²⁺ substituting Mg²⁺ ions in their T_d symmetry sites. The measured ground‐state absorption cross section σ_gs = 2.9 × 10^?19 cm², saturation contrast γ = 0.12, and depleted ground‐state recovery time τ₂ = 110–430 ns render such parts suitable for the intended application. The radiative lifetime was estimated as . The spin‐orbit splitting constant was estimated as ξ_SL??150 cm^?1 for the ⁴F parent ground state, and ξ_SL ? –575 cm^?1 for the ⁴P parent excited state. Obtained specimens had a transmission of ~80% (t = 2 mm, λ = 600 nm) and included some opaque, white spots. Further improvement of host optical transmission and resistance to laser damage are necessary.     

Rapid detection of Salmonella in pet food: design and evaluation of integrated methods based on real-time PCR detection

Reducing the risk of Salmonella contamination in pet food is critical for both companion animals and humans, and its importance is reflected by the substantial increase in the demand for pathogen testing. Accurate and rapid detection of foodborne pathogens improves food safety, protects the public health, and benefits food producers by assuring product quality while facilitating product release in a timely manner. Traditional culture-based methods for Salmonella screening are laborious and can take 5 to 7 days to obtain definitive results. In this study, we developed two methods for the detection of low levels of Salmonella in pet food using real-time PCR: (i) detection of Salmonella in 25 g of dried pet food in less than 14 h with an automated magnetic bead-based nucleic acid extraction method and (ii) detection of Salmonella in 375 g of composite dry pet food matrix in less than 24 h with a manual centrifugation-based nucleic acid preparation method. Both methods included a preclarification step using a novel protocol that removes food matrix-associated debris and PCR inhibitors and improves the sensitivity of detection. Validation studies revealed no significant differences between the two real-time PCR methods and the standard U.S. Food and Drug Administration Bacteriological Analytical Manual (chapter 5) culture confirmation method.     

Interfacial Tension; a Stabilizing Factor for Janus Emulsions of Silicone Bixa Orellana Oils

The destabilization process was investigated for a Janus emulsion of silicone and Bixa Orellana oils stabilized by polyoxyethylene sorbitan monooleate (Tw 80) and carboxymethyl cellulose. The emulsion stabilized with Tw 80 showed significant and fast creaming, a process that was prevented by the addition of the polymer. During the extensive coalescence of the emulsions stabilized by Tw 80, the Janus topology was retained for months of storage until, finally, separation of the oils occurred. This result strongly indicates an unexpected stabilizing action of the i nterfacial free energy. This conclusion was supported by a calculation for a realistic model system of the interfacial energy difference between two cases of coalescence. In the first case, the two coalescing Janus drops united into a larger Janus drop, while in the second case two drops formed, each with only one oil. The first case gave a spontaneous reaction (reduced interfacial energy), while the second one meant an increase of energy, i.e. it cannot happen without adding energy. The authors are aware that this stabilization is a new phenomenon in emulsion science with potential ramifications in future emulsion technology. However, it is essential to realize that the stabilization is of temporary occurrence in the destabilization process, and the free energy to give a final emulsion state with separated oils is overwhelmingly dominant. In short, Janus emulsions will, in the end, separate into layers of the liquids, like all emulsions.     

Structuring and Mechanical Properties of Composite Ceramics SiC(C) ― Si3N4, Sintered under High Pressure

We have studied the kinetics of high-pressure sintering of a composite SiC(C) ― Si₃N₄ powder of a certain phase composition. We consider structuring and mechanical properties of the ceramics obtained on the basis of this powder.

     

Optical particle sizing in backscatter

Several possibilities for the use of elastic light scattering in the backscatter range (scattering angle theta(s) > 140 deg) for determination of size, velocity, and refractive index of spherical particles are investigated. First the phase Doppler technique is considered. Numerical simulations of light scattering with the Lorenz-Mie theory are used to show that the phase Doppler technique is unsuitable for such backscatter configurations, except for special measurement conditions. The time-shift (or pulse-displacement) technique is then considered by use of the Fourier-Lorenz-Mie theory. Simulations show that up to four fractional signals can be obtained by use of the technique in backscatter, corresponding to the scattering order or modes: surface wave (long path), reflection, second-order refraction (inner path), and a mixture of second-order refraction (outer path) and surface wave (short path). Signal characteristics as a function of particle size, refractive index, and particle ellipticity are studied. Suggestions for a practical measurement instrument are put forward.