Carbon-nanofiber-based nanocomposite membrane as a highly stable solid-state junction for reference electrodes

There is currently a need for a reliable solid-state reference electrode, especially in applications such as autonomous sensing or long-term environmental monitoring. We present here for the first time a novel solid-state nanofiber junction reference electrode (NFJRE) incorporating a junction consisting of poly(methyl methacrylate) and carbon graphene stacked nanofibers. The NFJRE operates by using the membrane polymer junction, which has a very high glass transition temperature (T(g)) and small diffusion coefficient, to control the diffusion of ions, and the carbon nanofibers lower the junction resistance and act as ion-to-electron transducers. The fabrication of the NFJRE is detailed, and its behavior is characterized in terms of its impedance, stability, and behavior in comparison with traditional reference electrodes. The NFJRE showed a response of <5-13 mV toward a variety of electrolyte solutions from 10(-5) to 10(-2) M, <10 mV over a pH range of 2-12, and excellent behavior when used with voltammetric methods.     

Disseminated tuberculosis: A neglected entity in immunocompromised hemodialysis patients

End‐stage renal disease is considered a factor predisposing to increased risk of tuberculosis with frequent extrapulmonary localization. Although extrapulmonary tuberculosis has been observed for decades, disseminated tuberculosis, a major cause of morbidity and mortality in immunocompromised hosts, remains rather neglected. We report an unusual case of an immunocompromised patient with a late diagnosis and delayed treatment of genitourinary tuberculosis that subsequently led to the diagnosis of vertebral and miliary tuberculosis (disseminating tuberculosis). Therefore, increased awareness is warranted from physicians dealing with hemodialysis patients in order to avoid delays in diagnosis and treatment initiation.     

Ultrasmall Nanoplatforms as Calcium‐Responsive Contrast Agents for Magnetic Resonance Imaging

The preparation of ultrasmall and rigid platforms (USRPs) that are covalently coupled to macrocycle‐based, calcium‐responsive/smart contrast agents (SCAs), and the initial in vitro and in vivo validation of the resulting nanosized probes (SCA‐USRPs) by means of magnetic resonance imaging (MRI) is reported. The synthetic procedure is robust, allowing preparation of the SCA‐USRPs on a multigram scale. The resulting platforms display the desired MRI activity—i.e., longitudinal relaxivity increases almost twice at 7 T magnetic field strength upon saturation with Ca²⁺. Cell viability is probed with the MTT assay using HEK‐293 cells, which show good tolerance for lower contrast agent concentrations over longer periods of time. On intravenous administration of SCA‐USRPs in living mice, MRI studies indicate their rapid accumulation in the renal pelvis and parenchyma. Importantly, the MRI signal increases in both kidney compartments when CaCl₂ is also administrated. Laser‐induced breakdown spectroscopy experiments confirm accumulation of SCA‐USRPs in the renal cortex. To the best of our knowledge, these are the first studies which demonstrate calcium‐sensitive MRI signal changes in vivo. Continuing contrast agent and MRI protocol optimizations should lead to wider application of these responsive probes and development of superior functional methods for monitoring calcium‐dependent physiological and pathological processes in a dynamic manner.     

Multi-objective optimization of skeletal structures under static and seismic loading conditions

Almost every real world problem involves simultaneous optimization of several incommensurable and often competing objectives which constitutes a multi-objective optimization problem. In multi-objective optimization problems the optimal solution is not unique as in single-objective optimization problems. This paper is concerned with large-scale structural optimization of skeletal structures such as space frames and trusses, under static and/or seismic loading conditions with multiple objectives. Combinatorial optimization methods and in particular algorithms based on evolution strategies are implemented for the solution of this type of problems. In treating seismic loading conditions a number of accelerograms are produced from the elastic design response spectrum of the region. These accelerograms constitute the multiple loading conditions under which the structures are optimally designed. This approach for treating seismic loading is compared with an approximate design approach, based on simplifications adopted by the seismic codes, in the framework of multi-objective optimization.     

Development of NiO-based thin film structures as efficient H2 gas sensors operating at room temperatures

P-type NiO thin films have been developed on high resistivity Si and SiO₂ substrates by a pulsed laser deposition technique using an ArF^? 193 nm excimer laser at deposition temperature of 300 °C and in 40 Pa partial oxygen pressure. Structures based on such NiO films as host material in the form of Au-NiO Schottky diodes have been subsequently developed under vacuum. In a different procedure, an n-SnO₂ layer has been deposited by a CVD technique on a NiO film to produce a p/n heterojunction. The sensing properties of all above structures have been tested upon exposure to a H₂ flow in air ambient gas at various operating temperature ranging from 30 to 180 °C. For the NiO films, the optimum temperature was about 150 °C exhibiting a sensitivity of 94%. After surface sensitization of NiO by Au the NiO films showed an H₂ response at operating temperature of 30 °C. The sensitivity of p-NiO/n-SnO₂ heterojunction devices was extracted from I-V measurements in air and under H₂ flow mixed in air. In this case a dramatic increase of the sensitivity was achieved at operating temperature of 30 °C for a forward bias of 0,2 V.     

Soluble functionalized carbon nanohorns

Carbon nanahorns (CNH) were functionalized following the methodology of 1,3-dipolar cycloaddition of azomethine ylides and found to form stable solutions in either organic solvents or water. The number of added functional units, in the form of pyrrolidine moieties, was calculated when a pyrene chromophore was utilized in the modification scheme. Moreover, complementary theoretical calculations revealed that reactivity enhancement is expected at locations near the conical-shaped tip of CNH, where the highest curvature and strain exist. Finally, additional organic transformation of already modified CNH was exploited by covalently linked ferrocene units.     

Preparation of a selective receptor for ephedrine for the development of an optical spot test for the detection of ephedrine in human urine using stabilized in air lipid films with incorporated receptor

The present technique describes the preparation of a selective receptor for ephedrine and a simple sensitive spot optical test for the rapid one-shot detection of ephedrine in human urine using lipid films with an incorporated receptor that are synthesized by a chemical reaction with a methacrylate polymer on a glass fiber filter. The selective receptor was synthesized using a resorcin[4]arene receptor and by transforming all the -OH groups into methoxy groups. The lipid films without this receptor provided fluorescence under a UV lamp. The use of the receptor in these films quenched this fluorescence, and the color became similar to that of the filters without the lipid films. A drop of aqueous solution of ephedrine provided a "switching on" of the fluorescence, which allows the rapid detection of this stimulant in human urine at the levels of 10(-8) M concentrations. The effect of potent interferences (i.e., proteins, lipids, ascorbic aid, glucose, leucine, glycine, tartrate, citrate, bicarbonate, and caffeine) was examined. The results showed no interferences from these compounds in concentration levels usually found in human urine samples. Dopamine was also investigated as a potent interfering agent, and the results have shown that the transformation of the hydroxy to methoxy groups has altered the selectivity of the receptor. This species does not cause interference at concentration levels lower than 10(-6) M. A drop of urine containing ephedrine provided also a "switching on" of the fluorescence, which allows the rapid detection of this stimulant in human urine at the levels of 10(-8) M concentrations. The reproducibility of the method was checked in approximately 100 samples, and all of them were found to provide similar results. Note that the colors of the filters remain stable for periods of more than 2 months.     

Magnetic and transport properties of 214 oxides: Dependence on doping

We consider how doping can be described in terms of the charge-transfer insulator concept. We discuss and compare a few models for the band structure for the doped charges. This has led us to the conclusion that the band structure stability problem is one of the main issues in any correspondence between results for thet-J model and, say, the three-band model for the slightly doped layered oxides. The stability criterion is formulated and its implications discussed. Provided a phenomenological conduction band is chosen to satisfy the criterion of stability, a detailed picture of how dopants influence the spin wave spectrum atT=0 is presented. The basic physics for the destruction of the antiferromagnetic (AF) long-range order is rather model-independent: the long-range order (atT=0) disappears due to the Cerenkov effect when the Fermi velocity first exceeds the spin wave velocity. We then discuss the overall spectrum of spin excitations and see that the spin wave attenuation for x<x _c,T= 0 due to Landau damping appears in the range of magnon momentak(x)=2m ^* s±x. We also argue that in the presence of superconductivity, the Cerenkov effect is eliminated due to the gap in the spectrum. This may restore the role of the AF fluctuations as the main source of dissipation at the lowest temperatures. A brief discussion of how interaction with magnons may affect the hole spectrum concludes the paper.