光纤温度传感器原理及应用

阐述了几种光纤温度传感器的概况和原理，重点介绍了双波长光纤温度传感器原理，并详细介绍了利用光纤测试温度的若干种方法．功能型光纤温度传感器是利用光纤的各种特性(相位、偏振、强度等)随温度变换的特点，进行温度测定．而传输型光纤温度传感器的光纤只是起到光信号传输的作用，以避开测温区域复杂的环境，最后通过对光纤温度传感器未来的发展趋势和特点，提出了一些看法。     

3ds max中创建Camera Match点方法的探讨

通过创建一辅助长方体并对其进行变换，用其变换后的方向来反映3ds max中背景图像的透视方向，并利用其对场景与背景图像匹配的Camera Match点进行定位，为进行摄像机匹配提供了一种方便快捷、实用的新途径。     

英语歧义现象的语言学阐释

在有关歧义现象大量研究的基础上，试图从语音学、词汇学、句法学和语用学等几方面对歧义现象进行阐释，以期读者对歧义现象有一个较全面和理性的认识，同时也提供了一些消除歧义的方法。     

土壤固化剂在水利工程中的应用试验

为了准确掌握固化剂在水利工程中的应用范围，特别是能否在北方季节性冻土地区应用于渠道衬砌，针对应用固化剂固结土进行研究试验．根据固化剂特点，选择宁夏唐徕渠、汉延渠的渠床土及征沙渠风积沙、镇北堡粗沙，进行强度试验．实践证明：在固化剂含量一定(20．42％)的情况下，影响固结强度的主要因素是含水率．最优固结含水率为16．5％．得出结论：土壤固化剂作为一种新型建筑材料，应用于强度要求较低的工程建设中，技术是可行的，其固化沙石的效果较黏土、沙性土的效果显．     

藏红T与DNA相互作用的电化学及紫外-可见光谱研究

利用循环伏安法研究了藏红T(ST)在玻碳电极上的电化学反应,结合紫外-可见光谱(UV／Vis)对藏红T与DNA的作用机理进行了研究,并通过测定藏红T对溴化乙锭-天然DNA体系的影响,以及天然DNA和变性DNA与藏红T作用的不同,得出藏红T与DNA发生类似溴化乙锭的嵌插作用的结论,形成了2ST-DNA结合物,结合常数为3.46×104L2·mol-2。     

高压输电线路铁塔选型漫谈

本文结合近几年来,我国高压输电线路铁塔选型方面的基本情况,和作者本人从事高压输电线路铁塔结构设计中的一些经验和看法,简述了大负荷、新结构的塔型使用现状和铁塔选型应注意的一些问题。     

Preparation of Perovskite-Type Oxides La1-x Srx Fe1-y Coy O3 Using EDTA Sol-Gel Method

Two series of perovskite-type oxides with composition La1-xSrxFeO3 (x≤0.8)and La1-xSrxFe1-yCoyO3( x = 0.2；y = 0.2, 0.4 ) powder productions were synthesized by EDTA complexing sol-gel method. The products were characterized by XRD, TEM, SEM, BET method (N2 adsorption)and laser granularity analysis for different synthesis conditions to obtain the optimum conditions for the preparation process. Single-phased, uniform perovskite-type oxides with small particle size were obtained by EDTA sol-gel process with high stability and repeatability,and the process temperature is much lower than that of solid state reaction method.     

Physical and Electrochemical Properties of Doped LiFePO4 as Cathode Material for Lithium-Ion Batteries

LiFePO4 cathode material was synthesized by a solid-state reaction using doping several elements (Nb5 ,Zr4 ). The starting materials were mixed with a high-efficient sander and treated thermally under flowing N2. The samples were characterized by X-ray diffraction (XRD), field-emission gun electron microscopy (FEG), and their electrochemical performance was investigated in the term of cycling behavior. Room temperature discharge capacity about 140.6 mA·h·g-1 was obtained at C/5 rate.     

Defects tracking matrix for mass customization production based on house of quality

The vision of mass customization has driven a movement toward low volume, high variety mass customization production (MCP) at low price. However, defect identification and defect tracking in such systems are extremely difficult because of the frequent reconfiguration needed by the number of different part types and the interruption of the information flow about quality with each reconfiguration of the system. It is important to quickly rebuild quality information flow with MCP system’s reconfiguration synchronously. This paper introduces a defect tracking method based on Quality Function Deployment for every MCP system module. A defects tracking matrix (DTM) based on the House of Quality directly connects manufacturing technologies with quality defects inside a MCP module. Each MCP reconfiguration requires the DTMs’ rearrangement and DTM-chain is proposed. A dynamic reconstructing algorithm synchronizes the DTM-chain with each MCP reconfiguration. A case study demonstrates the usefulness of the DTM and DTM-chain.

基于功率变化率的刀具破损监测系统

介绍一种以刀具切削功率变化率为信号，利用单片机进行处理与判断，实现加工过程刀具破损在线监测的系统组成和工作原理，讨论了提高刀具破损报警准确性的措施。