心肌梗死后不同阶段冠状动脉介入治疗技术难度与即刻疗效观察

目的观察心肌梗死后不同阶段进行经皮冠状动脉介入治疗(PCI)的技术难度、即刻造影效果与安全性.方法 94例心肌梗死患者分成直接、延期及晚期PCI组,病例数分别为38例、22例和34例.术中根据冠状动脉造影评价梗死相关血管特征、PCI技术难度积分、PCI造影成功率及并发症.结果三组技术难度积分分别为 1.47 ±1.79、1.82 ±1.72和 2.85 ±2.83(P <0.05),PCI造影成功率分别为 92.0%、91.0%及 76.5%(P <0.05),PCI中严重并发症分别为 5.3%、0和 5     

Novel blood-compatible waterborne polyurethane using chitosan as an extender

A series of novel block polymers of polyurethane (PU) and chitosan have been prepared in two steps. The first step is the preparation of PU prepolymer, obtained from polytetramethylene oxide glycol (PTMO, M_n = 1000), isophrone diisocyanate (IPDI), and 2,2′-dimethylol propionic acid (DMPA), followed by ionizing PU prepolymer with triethylamine (TEA). The second step involves PU chain-extended by water-soluble chitosan of low molecular weight (M_n = 5000) by self-emulsion polymerization method. The sizes of the latex particles, morphology, and copolymer architecture have been characterized by dynamic light scattering (DLS), general tensile test, infrared spectroscopy (IR), surface contact angle measurement, and transmission electron microscopy (TEM). Furthermore, it shows that the addition of chitosan remarkably increases anticoagulative property of PU elastomers confirmed by the recalcification time. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A disposable sensor based on immobilization of acetylcholinesterase to multiwall carbon nanotube modified screen-printed electrode for determination of carbaryl

A simple method has been devised for immobilization of acetylcholinesterase (AChE) covalent bonding to a multiwall carbon nanotube (MWNT)-cross-linked cellulose acetate composite on a screen-printed carbon electrode (SPCE) and a sensitive and disposable amperometric sensor for rapid determination of carbaryl pesticide is proposed. The immobilized enzyme was preserved on this film because of the excellent biocompatibility and non-toxicity of cellulose acetate. Based on the inherent conductive properties of the MWNT, the immobilized AChE had greater affinity for ATCl and excellent catalytic effect in the hydrolysis of ATCl. MWNT improved the interface enzymatic hydrolysis reaction and increased the amperometric response of the sensor. Under optimum conditions, the inhibition of carbaryl on AChE increased linearly with the increasing concentration of carbaryl in two ranges, from 0.01 to 0.5 μg mL⁻¹ and from 2 to 20 μg mL⁻¹, with the correlation coefficients of 0.9985 and 0.9977, respectively. The detection limit was 0.004 μg mL⁻¹ taken as the concentration equivalent to 10% decrease in signal. The sensor showed acceptable stability, accuracy and could be fabricated in batches, thus it is economic and portable. This type of disposable enzyme-based amperometric sensor has extensive application potential in environmental monitoring of pesticides.     

纳米涂料用金属氧化物粉体材料的开发

介绍了纳米金属氧化物的制作技术，纳米粉末团聚问题的解决以及纳米金属氧化物用于涂料中所引起的神奇功能。同时综述了国内外开发纳米涂料的现状。     

一个通用代理计费系统开发框架的设计与实现

用户在不同的网络环境中选择不同的代理软件实现上网和用户管理，这些代理软件既有共性又各具特色，为减少开发不同代理计费软件的工作量，提高开发效率，加快开发周期，提出利用软件重用的思想，将代理软件的差异集中到少数几个类的实现上，设计并实现一个通用代理计费系统开发框架，基于此框架利用相对简单的步骤开发了基于SQUID的代理计费系统，验证了框架的实用性和可行性，达到了设计目标。     

小容量机组保护监控一体化

以数字信号处理器(DSP)和复杂可编程逻辑器件(CPLD)为硬件平台,研制了新一代面向中、小型水电站的综合自动化模块.充分发挥MB40智能可编程逻辑控制器(iPLC)及MB100系列保护测控系统的技术优势,将小型水电站的保护装置做成模块插件,融入监控系统,降低了小型水电站自动化设备的成本,为推出真正意义上的面向小型水电站的"五合一"产品打下坚实的基础.     

新钢板坯连铸中间包采用控流槽的水模拟实验

通过板坯连铸中间包水模拟实验,表明新型控流装置--控流槽可大大改善中间包内流体的流动特征参数和流动轨迹,并具有防止卷吸气体作用.     

Bone replacement in head and neck surgery: a biocompatible alternative

BACKGROUND: Defects in the skull have presented difficult reconstructive problems. Recently glass-ionomer cement and preformed. implants have been used to repair bony defects in the skull base and in cranio-facial surgery. Three patients are reported to illustrate possible applications for this new material. METHODS: Ionocap cement and Ionoroc-skull standardized implants have been used. The cement is available as a two component blister pack. When mixed and blended a gel is produced which can be worked for approximately 5 min before hardening. It can then be contoured and drilled to the required shape. The resultant material is biocompatible and biostable, is non-toxic and permanently bonds to bone with no increase in temperature or shrinkage. RESULTS: The material has been used to fill the temporal defect left by transplantation of the temporalis muscle for oral reconstruction, the anterior and lateral walls of the maxilla and following craniofacial resection, the posterior wall of the frontal sinus and anterior skull base. CONCLUSIONS: Three patients with different reconstructive problems have been presented to illustrate the use of an alloplastic material that has a tensile strength similar to bone and firmly adheres to it. The material was found to be safe and easy to use. All three patients have now been followed for 12 months with no adverse affects.