An investigation into physicochemical characteristics of ash produced from combustion of oil palm biomass wastein a boiler

Ash derived from combustion of Malaysian oil palm biomass (empty fruit bunches consisting of fibers) was physically and chemically characterized in order to provide a comprehensive understanding of its specific properties in terms of toxicity, compositions and reusability. Principal analyses conducted include particle size distribution, scanning electron microscopy, elemental dispersive X-ray, elemental analysis, toxicity characteristic leaching procedure (TCLP) as well as thermogravimetric, X-ray diffractometry and Fourier-transform infrared analyses. TCLP result indicated that the oil palm ash (OPA) should not be classified as toxic wastes in terms of heavy metal leachability since leachable copper, cadmium, lead and nickel concentrations were detected below the stipulated leachability limits. It was determined that the OPA contained high amount of potassium as well as presence of silica which implied its suitability to be reused as crude fertilizer or cement replacement material.     

Fracture toughness of thermoset composites reinforced by perfectly bonded impenetrable short fibers

The fracture toughness of brittle thermoset resins could be improved significantly by perfectly bonded tough, short fibers through both crack trapping and bridging effects. In this paper, the crack trapping effect was studied through the analysis of the change of strain energy associated with the crack propagation across a regular array of fibers, and the bridging effect was discussed based on the Andersson–Bergkvist model. The fracture resistance increases with the fiber volume fraction, and is independent of the elastic properties of the matrix, the crack length, and the cross-sectional diameter of the fibers.     

小型中间下料预焙电解槽技术条件摆布的思考

对小型中间下料预焙电解槽技术条件摆布的原则和具体数据进行了探讨，提出了尽可能利用从大型预焙槽上得出的先进经验，并消化吸收，掌握好各种条件的平衡，以取得好经济技术指标的观点。     

亚毫米波系统探测距离分析

本文提出了距离的概率分布函数作为系统的性能指标，提高了系统评价的准确性。     

改善磁盘阵列性能的方法

磁盘阵列是解决计算机Ｉ／Ｏ瓶颈问题的有效方法之一，通过对现有磁盘阵列结构的研究，提出了４种改善磁盘阵列性能的方法，即良分利用磁盘带宽，平衡多盘的负载，减少奇偶检验数据存取时间和磁盘阵列Ｃａｃｈｅ技术等，分析结果表明：在事务处理应用领域，利用Ｃａｃｈｅ来把小写转化为大写可大大改善目前一般情况下，以一道数据大小来作为磁盘的基本存取大小是合适的选择，磁盘阵列负载平衡设计不足是指正常模式下系统请求在多盘间     

RAID的存储信道分析

本文从冗余磁盘阵列的信道模型出发，研究各部分组成的理论与技术。文中在给出系统的模型描述之后，着重分析了冗余信息元生与检纠错、数据分割与同步。还研究了系统中的负荷平衡问题，指出了磁盘优化调度的方向。     

The levels of integrin alpha v beta 5 may predict the susceptibility to adenovirus-mediated gene transfer in human lung cancer cells

Adenovirus mediated transfer of growth-inhibiting molecules, such as p53 shows promise as an effective method of suppressing the growth of cancer cells. As the basis for in vivo studies, we examined transfection efficiency using 15 human lung cancer cell lines that differ in their endogenous p53 status. When infected with an adenovirus expressing bacterial beta-galactosidase, the different cell lines showed different levels of beta-galactosidase activity. We found a correlation between the level of integrin alpha v beta 5, which is thought to be an adherence receptor for adenoviruses, and the expression level of the transferred gene, suggesting that gene expression is largely dependent on the infection efficiency. Growth inhibition was induced in all cell lines tested following infection with an adenovirus containing p53, regardless of the genetic status of their endogenous p53 provided a sufficient amount of p53 protein was expressed. Our results (1) confirm that the examination of the susceptibility of target cancer cells to an adenovirus is important when considering performing adenovirus-mediated gene transfer and for evaluating its therapeutic effects; and (2) suggest that the quantification of integrin alpha v beta 5 may be a good way of predicting the susceptibility of cells to adenoviral vectors.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

基于STEP的零件加工工艺计划模型

为了满足ＣＩＭＳ环境下工艺系统与其它系统集成的需要，建立了标准工艺计划模型具十分重要的意义。本文描述了一个基于ＳＴＥＰ的零件加工工艺计划模型，介绍了建立这一模型的关键技术，给出了参照ＳＴＥＰ建立工艺计划模型的方法。     

60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响