3-D discrete analytical ridgelet transform.

In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines: 3-D discrete radial lines going through the origin defined from their orthogonal projections and 3-D planes covered with 2-D discrete line segments. These discrete analytical lines have a parameter called arithmetical thickness, allowing us to define a 3-D DART adapted to a specific application. Indeed, the 3-D DART representation is not orthogonal, It is associated with a flexible redundancy factor. The 3-D DART has a very simple forward/inverse algorithm that provides an exact reconstruction without any iterative method. In order to illustrate the potentiality of this new discrete transform, we apply the 3-D DART and its extension to the Local-DART (with smooth windowing) to the denoising of 3-D image and color video. These experimental results show that the simple thresholding of the 3-D DART coefficients is efficient.     

Optimized ITO-free tri-layer electrode for organic solar cells

The optical properties of ZnO/Ag/ZnO (ZAZ) multilayer structures were numerically modeled and calculated by a FDTD method. Such tri-layers were also manufactured using an ion beam sputtering plant. A good agreement is obtained between modelizations and realizations. The impact of the oxide thicknesses on the optical properties of the ZAZ structures were experimentally and numerically investigated, and allow us to adjust the spectral position of the transmission maximum. The transmission of these structures is optimized up to around 74%, on the whole absorption spectral range of the photoactive P3HT:PCBM bulk heterojunction. The best electrode design is glass/ZnO (30 nm)/Ag (14 nm)/ZnO (30 nm), which presents a sheet resistance of 7 Ω/□. The optimized ZAZ structure was successfully integrated in an organic solar cell as anode. A photovoltaic efficiency of 2.58% is obtained and is compared to an organic solar cell integrating a traditional ITO anode with an efficiency of 2.99%. Numerical calculations of the intrinsic absorption inside each layer of the organic solar cells are performed. Alternative ITO-free electrodes for organic solar cells are demonstrated.     

Geometry modeling in cellular network planning

To design a cellular radio network (GSM, UMTS, WiFi …) it is indispensable today to use a radio planning software. In current commercialized tools, radio network planning is based on a numerical evaluation of a set of radio metrics, directly linked to quality of service notion, such as interference, throughput, coverage, capacity … The network configurations produced by such tools are generally faced with the human expert judgment who attaches great importance to the organizational aspects such as cells size and the topology. In other words, all those concepts related to the visual cells shape and geometry. In this article we emphasize the simplicity and the strength by which the geometrical concepts helps to bring out good network properties which are not taken into account by conventional radio criteria. On one hand, well-formed cells lead to reduce the number of handover calls, and to form transition zones between cells allowing proper completion of the handover procedure. On the other hand, cell geometry optimization produce performing network schemes in which the frequencies reuse (frequencies planning in GSM, WiFi) is simplified. We describe in this paper an original and practical modeling of the cellular geometry criteria granting the integration of this concept into the automatic planning process of mobile radio networks. The relevance of this criterion is assessed on three different levels. On a local level, we first establish the correlation between the geometric criteria and the improvement of point-by-point radio quality indicators. We secondly show geometry impact on radio frequency planning and the improving of the handover zones. Finally we analyze the impact of geometric criterion on improving indoor positioning systems.     

Microstructured air-silica fibres: Recent developments in modelling, manufacturing and experiment

The main modelling methods devoted to microstructured air-silica optical fibres (MOFS) are presented and discussed. Then, the specific propagation properties ofMOFS are studied in detail. Characteristics measured on fibres manufactured in our laboratory or reported in the literature are analysed. A large number of potential and demonstrated applications are presented and the obtained performances are discussed. A particular attention is given to hollow-core photonic bandgap fibres and their applications.     

Network-controlled mobility within radio access networks based onWLAN technologies

This article presents a network-controlled approach of user terminal mobility within anIP based WirelessLAN Access Network. In a first part, this article makes a review of the mobility support, on the subject of emergingWLAN technologies asHIPERLAN/2 andIEEE 802.11, on the one hand, and, regardingIP networks as currently studied withinIETF, on the other hand. Both types ofIP mobility protocols are presented, either global mobility protocols such as MobileIP, or local mobility management protocols (micro mobility). In the next part, the overall principles of our mobility management approach are explained; this approach is based on the implementation of a new network entity dedicated to the control of user terminal mobility. The last part details a practical implementation of this approach. The implementation is carried out on the basis of Hierarchical MobileIPv6 (HMIPv6). The experimental results confirm the importance to carefully plan and control the user terminal mobility within largeIP based Access Networks, as this brings benefit to the user as well as to the operator.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

A Novel Surface Reconstruction and Display Method for Cardiac PET Imaging

Positron emission tomography (PET) allows the in vivo assessment of biochemical activity in humans. The newer PET cameras can create several imaging planes, or slices, through an organ inside the body. The interpretation of two-dimensional (2-D) slices of an organ is often difficult for the clinician since he or she has to form a three-dimensional (3-D) mental composite of the structure of interest. We have developed a set of algorithms to reconstruct a functional three-dimensional surface model of the cardiac left ventricle from a set of two-dimensional cross-sectional image slices generated by PET. The theoretical techniques for this reconstruction method are applicable to most organs provided that the appropriate models for the organs are considered. An automatic boundary detection algorithm outlines the surface of the left ventricle from the 2-D images and assigns intensity values to the surface points whose level is proportional to the local activity. A 3-D surface of the intensity levels, with pseudocolor enhancement, is then displayed with the long axis of the heart in a vertical position. Such a display allows the 3-D myocardial tracer uptake to be clearly visualized by the clinician for better diagnosis.     

Dynamic energy release rate evaluation of rapid crack propagation in discrete element analysis

A non-associated/associated flow rule coupled with an anisotropic/isotropic quadratic yield function is presented to describe the mechanical responses of two distinct X65 pipeline steels. The first as a product of the cold-rolling forming (UOE) process also known as seam weld pipes and the second as a result of high temperature piercing process called seamless tube manufacturing. The experimental settings consist of a wide range of sample types, whose geometric characteristics represent different state of stresses and loading modes. For low to intermediate stress triaxiality levels, flat specimens are extracted at different material orientations along with notched round bar samples for high stress triaxialities. The results indicate that despite the existing differences in plasticity between materials due to anisotropy induced processes, material failure can be characterized by an isotropic weighting function based on the modified Mohr–Coulomb (MMC) criterion. The non-associated flow rule allows for inclusion of strain directional dependence in the definition of equivalent plastic strain by means of scalar anisotropy (Lankford) coefficients and thus keeping the original capabilities of the MMC model.     

On monitoring the process mean of autocorrelated observations with measurement errors using the w-of-w runs-rules scheme

Runs-rules have been widely used since the 1950s in industrial and nonindustrial process monitoring applications to improve the performance of basic and other traditional monitoring schemes. However, none of the studies on runs-rules have accounted for a process with a combined effect of measurement errors and autocorrelation. Hence, in this paper, the use of the w-of-w runs-rules to improve the performance of the Shewhart $\overline{X}$ scheme using an additive model with a constant variance and a first-order autoregressive model is proposed. To reduce the combined negative effect of measurement errors and autocorrelation, we implement a sampling strategy based on rational subgroups in which (a) multiple measurements per item are taken (instead of a standard single measurement) and (b) non-neighboring observations are gathered. Moreover, the latter sampling strategy is incorporated into the values of probability elements of a Markov chain matrix which is used to derive some closed-form expressions for the zero- and steady-state run-length distribution. The main finding of this study is that, with respect to some overall performance measures, the proposed scheme outperforms the existing Shewhart $\overline{X}$ scheme by a significant margin. A real-life example is used to illustrate the practical implementation of the proposed scheme.